This video just is very great info, just pop my 1977 hiace transmisión riding down a hill, in 1st gear beacuse of a heavy tráfic with 10 passingers 🤪 but don't think I be able to do the work. What a amazing job sir! 👏👏👏
Hi.... Excellent job.... in june I get a problems with my Hi ace 95' transmission, the gears of 3th was broken, and has to reconstruct totally. My work do'nt look so nicely like yours, but my vans is on the road again. Thank for share your video.... is an inspiration for those who take in our own hand that types of work...
Using a metal hammer on the bearing journal to knock out a locking ball??? Not lapping the synchronizer to the cone??? Not even bothering to clean off the bit of gasket material on the sprocket??? With all due respect of the hard work put in, it is the careless attitude to such fine details that will affect service life after the rebuild.
The most wonderful work I have enjoyed so much watching it because I have been looking for it for a long time .... Greetings to you from an Egyptian follower👍👍👍
very perfect keep up brother,the syclonizers still work though from Taiwan ,where do I get this lubricants to wash this gearbox housings also work in a mechanical industry but self employed
Should clean the dirt and grit before dismantling the unit. Limited tools. Any and everyone does a restoration video now no matter the quality of work.
I don’t understand why mechanics don’t like to use power tools. There are power tools available in any size of any style with precise torque. It’s much faster, easier and more efficient. It saves time and labor. Can any mechanic explain that? By the way good job at restoration.
Tengo una caja de Toyota hiace quiero saber si se puede poner una palanca directa desde arriba y colocarlo en un Jeep ika?la caja es toda de fundición de hierro
Сделал все красиво. НО! Слишком много герметика, слишком большой слой. Излишки герметика выходят не только наружу, но и внутрь коробки. Эти излишки со временем отрываются и попадают в рабочее пространство между шестернями, роликами подшипников и забивают масленые каналы (детали остаются без смазки). Наноси тонкий равномерный слой, чтобы при сборке на стыках была тонкая, РАВНОМЕРНАЯ по всей длине линия герметика, например в толщину рыболовной лески. А так, все круто!
is this a transmission of Toyota hiace commuter van? i have some job now the problem is there is no reverse if i shift in reverse the van will go forward? what is the problem?
@@sonnymendoza9654 Sonny Mendoza hahahah No stupid it's clearly by uniform and most clearly is Maintenance method it's femous by Pakistan ppls. Have a great day to smiling armpit of your 🐕 as way of your dirty recognization 😂😂
This video just is very great info, just pop my 1977 hiace transmisión riding down a hill, in 1st gear beacuse of a heavy tráfic with 10 passingers 🤪 but don't think I be able to do the work. What a amazing job sir! 👏👏👏
THIS is how a master does it. mandatory viewing for any mechanic
I do not understand why this video has so many I DO NOT LIKE, if this content is of quality. Thank you very much for making this type of video.
Hi.... Excellent job.... in june I get a problems with my Hi ace 95' transmission, the gears of 3th was broken, and has to reconstruct totally. My work do'nt look so nicely like yours, but my vans is on the road again. Thank for share your video.... is an inspiration for those who take in our own hand that types of work...
It would be at least 50% lighter if I did it ! Great video.
una vez mas....la herramienta no hace al mecanico..exelente trabajo señor.
واہ استاد جی مزہ آ گیا دیکھ کر..... ذبردست
lol.... I would have at least 10 extra parts left over if I attempted that, thus the reason I am a viewer only.. ;) nicely done sir.
Using a metal hammer on the bearing journal to knock out a locking ball???
Not lapping the synchronizer to the cone???
Not even bothering to clean off the bit of gasket material on the sprocket???
With all due respect of the hard work put in, it is the careless attitude to such fine details that will affect service life after the rebuild.
And what more do you expect? They have only hammer, screwdriver and one broken torx wrench.
And look at where they come from.
If they had a copper hammer i wouldn't be cringing as much
Ur attitude is from the land of the plenty, in lands of scarcity, you make do
@@OboteOjok oh well said well said brother
Hello, Master? What specific cleaner did you use in cleaning?
If the gearbox is in good condition, pls don't dismantle it, just clean the grease or oil outside and change the fluid if necessary.
Impressive work, thanks for sharing the video 👍
I feel you did a great job on refurbishing this this older transmission so it may work for many more years 👍.
Nice work!!!! looks new.
Pure handmade skill
The most wonderful work I have enjoyed so much watching it because I have been looking for it for a long time .... Greetings to you from an Egyptian follower👍👍👍
Perfect restoration keep it up 👍👍👍👍👍👍👍❤❤❤❤❤👌👌👌👌👌👌👌👌👍👍👍
very perfect keep up brother,the syclonizers still work though from Taiwan ,where do I get this lubricants to wash this gearbox housings also work in a mechanical industry but self employed
Lo felicito por su trabajo
Very hard & Nice Working Mr. Tool Good Luck
BRAVO MR. BRAVO!
Perfect video where do you buy ur parts from to replace the old gears etc
That is nice sir. Kudos keep it up.
Your very talented. Synchronizer replacement parts are Taiwan made. From Marikina, Philippines
steve bonsol
You are brilliant...
Excellent job. How on earth do you remember the order in which every component must fit back in!? Hats of to you Sir
Rewind the video. Done.
Nice job ! What was the problem with this gearbox while driving ?
perfect work
Eu gostei muito mas gostaria de ver a primeira tapinha que tiraste das mudanças.
Good work👍🏻
Great work
I like the video and subscribed
sir very good restoration
يمكن الي مسوي المقطع عراقي .. الادوات كلها كانه منا من السنك .. بس فدشي يجنننن
Wow just wow :)
Awesome Mr tool can u do one on a nissan1400bakkie tanx bro
You're very good, I use this van, I will remember as a repair guide,But now that the transmission oil oozes out, what to do? thank you very much
Thank you!
Great working
This is just ART AT ITS FINEST! wow great job Sir
need to visit your workshop Mr where is it am In Kenya
Nice restoration, but stop putting silicone gum inside the bolt hole
Nice job
I love my job
Especially when I am repairing gear box
Hi Mr.Tool 👋👋👋very good restoration gearbox 👍👍👍 and video cool 🤝🤝🤝
Thanks 4 sharing
Good work
From what I see Im calling it a 5 speed looks like some Hi-Lo range going on? Bro you re-used the old cage bearings??
Great job
❤❤❤❤❤❤عالی
Impressive.
Critical part in engine nice work sir
Should clean the dirt and grit before dismantling the unit. Limited tools. Any and everyone does a restoration video now no matter the quality of work.
Perfect boy
Beautiful
That's a lot elements, in America people lazy to do, just buy another one and put it. Ways cheaper then clean.
The hardest part is you need to memories install sequence of every gears 👍
Good job
I don’t understand why mechanics don’t like to use power tools. There are power tools available in any size of any style with precise torque. It’s much faster, easier and more efficient. It saves time and labor. Can any mechanic explain that?
By the way good job at restoration.
Tariq Choudry most do use power tools
good thanks
Can you film the same work on the Peugeot 504 gearbox ?? Excuse please
Abosagda Hassan like
Hi i am from Perú i have one question wirtch Gearbox G52 Joe many hp's stock can suport? I upgrate my motor for 2jz GTE THX.
Thank you uncle
Magnific
where do you work? do you accept commissions?
How much that kind of service including parts replacement?
Tengo una caja de Toyota hiace quiero saber si se puede poner una palanca directa desde arriba y colocarlo en un Jeep ika?la caja es toda de fundición de hierro
Awesome
Good pm sir, my name is engineer gaius I repair all cars but I have a question to ask about gear box? Can you help me at pls
Máster...
Сделал все красиво. НО! Слишком много герметика, слишком большой слой. Излишки герметика выходят не только наружу, но и внутрь коробки. Эти излишки со временем отрываются и попадают в рабочее пространство между шестернями, роликами подшипников и забивают масленые каналы (детали остаются без смазки). Наноси тонкий равномерный слой, чтобы при сборке на стыках была тонкая, РАВНОМЕРНАЯ по всей длине линия герметика, например в толщину рыболовной лески. А так, все круто!
is this a transmission of Toyota hiace commuter van?
i have some job now the problem is there is no reverse
if i shift in reverse the van will go forward? what is the problem?
Gostei muito da aula parabéns! Obrigado.
???
super
Hola a esa caja de velocidades se le puede poner una palanca para arriba para colocarla en un Jeep ika
Bos hinde papalitan lahat ng bearing?
Mlm bosq mobil majikan ku hiace disel juga persenelen gigi 1,2,dan gigi mundur/ antret selalu muntah minta solusi nya makasi
Que modelo de caja de cambios es ?
Names of the Cleaners used in this?
What is the code for this transmission.
А что было сломано?
Мыть кожух сиысла нет, через неделю будет грязным 😊
Oil??
مشاء الله على التجميع
انا مكنيكي جربوكسات .ابحث عن فرصة عمل.ساعدوني . شكرا
Nice
ربڑ کا ہتھوڑا استعمال کرو 👍
What country is this
So what was the problem with it? Were we supposed to guess?
Why no narrative?
master hammer
اناةاللي شايفه كل شي المطرقه يطلعه 😂😂😂 .. يا ولد انت صاحي
ممتاز
An ashok leyland dost RSB gear box
😮😮👍👍👍👏👏
,how much dollar
Dude, invest in a plastic face hammer.
Зачем разбирал,??? Помыть можно без разборки!
синхронизаторы вроде менял
reuse all bearing?
Still in good condition,why not???
I got 5 of these gearbox ready to use after full servicing..... Lazy people always buy new ones made in china and i can keep the original for cheap🤣🤣
Lets fix a gearbox with a hammer. Good idea.
ههه
Definitely Parkistani person working 😂 Great ppls
How did you know??? Have you smelled his armpit in the video????
@@sonnymendoza9654
Sonny Mendoza hahahah
No stupid it's clearly by uniform and most clearly is Maintenance method it's femous by Pakistan ppls. Have a great day to smiling armpit of your 🐕 as way of your dirty recognization 😂😂
@@Ahmed-AlSharahili no dumb ass he is a syrian
No salekon
Waste of time Toyota gearbox never gives up I have never seen Toyota Hiace gearbox giving trouble so you waste your time pal
Any transmission will fail with enough abuse, and since this one was so dry inside that it didn't even drip when he cracked it open . . ..