How To: GE Oven Temperature Sensor Assembly WB21X22134
HTML-код
- Опубликовано: 21 окт 2024
- How To Replace: GE Oven Temperature Sensor Assembly WB21X22134 www.appliancepa...
Symptoms: shorts or burns out causing oven not to work properly.
Tools: flathead screwdriver, 1/4" nut driver.
This GE made Range Oven Temperature Sensor Assembly replaces the following older part numbers on General Electric, Hotpoint, RCA, Sears and Kenmore Ranges: WB21T10007, WB21T10017.
Buy the new Range Oven Temperature Sensor Assembly WB21X22134 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
Quoted $385 to fix it. Ordered the part from you for $30 and watched the video. Took me 5 minutes. THANK YOU.
For others who watch this, if you can see the sensor in your oven and it looks like this one the replacement is the same, GE, GE Profile, range, single or double oven
Did my GE stove today according to your video and was evaxtly like you said took me 15 minutes, thanks for your video
I just need the clamp thingy, what's it called and where can I get it? TY
Will the red indicator light on the range glass top turn on for the oven? Or does the red indicator light stay on only for surface burners? My red light on my GE range glass top stays on because something is shorted. It’s either the burner or the oven temp sensor.
That light would only come on when the surface is on. You will need to determine which part has failed causing that issue.
@@appliancepartspros thanks, I've checked all the burner switches for the red surface light and they all test OK. I'm stumped.
F2 error occasionally for several years usually with the oven off. I bought the new sensor and slowly pulled the old one out. At the end of the harness, the plastic fitting was burnt right off. I opened the back of the stove and on the wire that it attaches to, That plastic fitting was also burnt and melted. That wire goes up and under the stovetop so at this point I chickened out and called a repairman. I have been waiting almost a week for him to come. I called back and he said he was doing "research" on the problem because he has never seen this before. I assume the plastic melted years ago during a self-clean. What should I do now? Call a different repairman?
Thank you! You just saved me serious coin!
I just replaced the temperature sensor and it did not fix the problem. Any other ideas as to what may cause the incorrect temps and over heating?
Same issue. Changed sensors in double wall oven and the Temp is still way off. Did you find a solution?
What if it's a gas range?
Where can I find the part# on the oven, or is the part# on the temp sensor itself?
Do you happen to have the model number of your oven? Normally it is located on the inside of the door frame.
@@appliancepartspros yes found it. Starts with 317
In order to be able to assist you we would need to have the full model number.
317B6641P001
@@appliancepartspros 317B6641P001
What is the type of nut driver mentionned at 0:40?
Looks like a Klein brand. 7/16 is the size.
you are great
We appreciate it!
Dum video disconnected a 110 cord when its supposed to be a 220 cord wrong wrong wrong only gas range has 110
Спасибо большое, все доходчиво и понятно