L TRACK V.S UNISTRUT | Which One is BEST for your VAN?
HTML-код
- Опубликовано: 6 июн 2024
- Today we're looking at the Pros and Cons of L Track and Unistrut to see what is best for you camper van build out! If you're interested in see how to install L Track and/or Unistrut check the videos linked below.
L-TRACK to Sub-Floor Install: • L-Track to AVC Sub-Flo...
UNISTRUT Install: • UNISTRUT DIY | How to ...
AVC now selling pre-cut Unistrut!
UNISTRUT: avcrig.com/collections/interi...
3D UNISTRUT CAP: avcrig.com/collections/interi...
Tools / Material's you'll need:
Makita Screwgun and Drill Set: amzn.to/3IVfZc9
Socket Set: amzn.to/3Llr884
M8 Bolts: amzn.to/3kkwTHc
M8 Washers: amzn.to/3kju2hH
Unistrut (To make your own.): amzn.to/3OKpnng
Strut Channel Nuts: amzn.to/38pHm1s
Step Bit: amzn.to/3NxHFqZ
Milwaukee Knife (General): amzn.to/3rb6Xlt
RivNut Installer: amzn.to/38856XD
RivNuts 8mm: amzn.to/3LIousO
Socket Set: amzn.to/3Llr884
L-Track (Flange): amzn.to/3FFLmHz
L Track (Angle): amzn.to/3NcEcgw
L-Track Bolts: amzn.to/3wvo8A2
L-Track Loops: amzn.to/3sx6lHk
L-Track Tie Downs: amzn.to/39gyJ9I
➡ WEBSITE: avcrig.com
➡ INSTAGRAM: avcrig.com
Feel free to ask any questions, give the video a like, and subscribe to the channel for more camper van conversion info! 
Авто/Мото
Good comparison. I’ve been using Unistrut/kendorf/superstrut for 30 years. Its infinitely adjustable, muuuuuch cheaper and supports more weight In our warehouses (3) and vans (prob 50 over the years), I’ve never primed and painted the cut ends, and it never created anything more than surface rust. No degradation in use and no “creep” under the ionization. Also, 10 mins of effort, and you can create custom holders for anything. The game changer was replacing the “strut nuts” with “cone nuts.”
I’m guessing you’re cost comparison does not include the extra fuel you use driving your vans around with Unistrut. 80/20 is infinitely adjustable too. Just because almost no one building vans knows how to properly use 8020 t-slot extrusion to take advantage of its features doesn’t mean it should’ve been left out of the comparison
Dude, this was one of the most practical videos I’ve watched on van builds, and I’ve watched hundreds of videos. You really influenced my upcoming build. Thanks for the video.
This is great. Unistrut is often overlooked and we’re glad to share it.
Great job, Matt👍!!
It's good to have alternatives👌!!
Thanks!
I agree 100%. I have used unistrut , use to be called kendorf years ago, in my HVAC business for 35 years and I know a lot of uses it provides. The only draw back is weight. I have used it on roofs to hold ac units. They will not rust with the powder coat paint.
Hi Matt, Thanks for all your videos. They have been super helpful.I ordered a 2022 transit 5 months ago. Still waiting for it to be built. I will be converting it when it arrives. Looking forward to a video of how to mount cabinets to the unistrut. Thanks again for all the help you've provided for all of us.
Glad you like our stuff! We filmed mounting cabinets we’re just waiting on release now.
Uni-strut is available in aluminum. I have the short and the high profile models on my van. Several models of end caps are available too.
Thanks for the info! I had seen deep channels, but never shallow stuff.
Amazing, thanks for doing this!
Use unistrut for years when I did construction. Lots of kits that put things framed up well. Got steel to weld and galvanized not to weld poison fumes.
This is very helpful. I was looking at l-track exclusively, but you really have me reconsidering. I have seen aluminum unistrut, so I may research that some more.
That’s great. There’s lots of options out there, definitely see what’s best for you.
l track selling feature it the quick secure, no tools. The only argument here was cost, and the bolt issue (which if you bolting something (permament) why you just bolt it to the substrate?🤷♂️)
Great info and opinions getting kicked around here. Thanks for this video that jump started it.
It’s a party
Nice tutorial, I’m doing band life on a budget, and work construction, I get all my strut for free! The stuff is really cheap as you mentioned, and when I say cheap, I mean and expensive because it is a quality product as well. As I mentioned, I get mine for free because I dumpster dive and recover all the used Yuna strut that the electricians and plumbers throw away when they are reconfiguring different things. It’s amazing how much strut I am able to acquire. Even 10 foot lengths. although mine are usually painted white over the galvanized finish, and they also have holes in the back, well, not holes as much as elongated holes, I’m sure you know the type, but it’s all free. I do have to Buy all the fasteners, but no big deal, fasteners are cheap and I don’t use a whole lot, most of my strut is used in structure anyway. I do weld a lot of the material together, so the powder coat finish needs to be done afterwards, although I don’t worry about rust so much, like I say on a budget and like function over form. But again thank you for showing me the L track I may need to get some for my bike tiedowns.
There is also slotted unistrut which is therefore lighter than the solid unistrut that you have there.
The unistrut with holes saves some weight and maintains the strength.
Thanks for the the informative video. Questions: #1 What about using aluminum Unistrut? Maybe it's weaker but wouldn't it still be strong enough to install cabinets and a bed frame as long as there are enough fasteners (one on each rib) to distribute the load? I'm hoping to get an electric van to build out and want to keep the weight down wherever possible. #2 How do you fasten aluminum Unistrut or L-Track to the van? Aren't steel fasteners incompatible with aluminum, causing corrosion over time?
Thanks for the info. Can you recommend a water proof box cabinet to conceal my electrical system and water tank and wheel wheel area. Thanks
Try close-ups on the parts, instead of waving them around so we have no idea what the fittings actually look like.
My NPR box truck is gonna look so good and utilitarian with a custom unistrut, powder coated roof rack
Share pics online. We’d love to see
Could you use that unistrut to make a bed frame? Just from one side to the other without support underneath for more storage under the bed?
They make aluminum strut too.
just found your vid as I was comparing unistrut to 10-series 8020 to L-Track. Hope you don't mind me resurrecting an old video.
I'm looking at making a set of rails for a roof rack and I'm considering all options.
After seeing your vid, I think I'm moving away from the L-track.
You talked about weight, but have you all considered using aluminum unistrut? If so, why do you use steel over aluminum?
Also, why not use low-profile, single sided 8020. I think it's the 10-series (part number 1575 or siimlar) that has only one side that's got the rail instead of all 4 sides. There are other verndors that make this, like Powertec; but these are made for wood working tables. I worry a bit about strength.
Any insight from someone who uses it would be greatly appreciated.
Much thanks in advance.
What about 15 series 8020 1.5" x .75"? Can get silver and black anodized.
Any thoughts on aluminum unistrut?
I'm wanting to build a rack for the top of my Sprinter. Essentially one purpose.. to hold a 200w solar panel w/o having to drill holes in the roof. What are your thoughts. Video is over a year so you may not see it. Thank you..
What about compared to80/20, extruded T-slot aluminum? Could this not be the best of both of those worlds?
Slots will help match L-track 1 inch increments for bolting things down. And unistrut comes in aluminum. Boom!
Boom indeed. 😎
@@AVCRIG The best pro of unistrut, as you said, is that you can get it anywhere. (But no one carries AL unistrut, have to order. But at least the hardware is everywhere).
Aluminum extrusion seems prudent to work into a followup for this video. The 80/20 catalogue is ripe with van applicable products, particularly when odd articulating assemblies are needed such as Murphy beds, etc.
This could open up a can of worms and I like it!
@@AVCRIG feel free to reach out and I’ll be happy to share some of the things I’ve come up with. The OurKaravan galley is a good idea of the flatpack modularity of it, and can confirm there are numerous drop in, roll in, and other fasteners that are as convenient as strut and offer the same benefits over logistics track.
@@AVCRIGIf you haven’t seen it, Misumi has an insanely comprehensive collection of extrusions, and of hardware in general.
They also have an impressive collection of hardware that they can customize. Bolts with precise lengths, etc. Sometimes two or more different measurements with 2 to 3 significant figures of dimensions.
That is approximately the opposite of “available at a big box store”, but it’s really fun to look at :)
Would you happen to know the specific type of l track needed for seating? Any links would be greatly appreciated!
Hi Trent. We do not use any L-Track seating in our builds, we like the mounting system from JMG Seating.
While I agree with everything you said, you did not mention the cost of the painted coatings on the Unistrut. It should be professionally powder coated as you could not easily get the paint fully under the channel. It would be good to also add the cost of the Unistrut special nuts and not just account for the 8 cent bolts.
That’s a good point about the strut nut. I order super green coating on our strut and it comes that way powder coating is a great option too ( we offer pre cut and coated stuff on our site). It’s actually really difficult to find truly raw unistrut from anywhere but a specialty supplier (we looked it actually costs more from my distributor, guessing economy of scale) It’s just not common.
Could you use a profile of 80/20 along the walls drilled for factory insert locations instead of l track or uni strut?
You definitely could but I think it would be more difficult. If you’re building all your cabinets from 80/20 then it would be the way to go.
Do you use mostly P3300 GR @ 8:29? That looks like what you said you are holding there. I'm having a hard time finding that locally in the green like you have there. My local Industrial Metal Supply store only has the 1 5/8" tall stuff. And the big box stores have the stuff with holes.
That's correct. I order the P3300 form my electrical supply house. Some big box stres have it in thew shallow (13/16") configuration. We do sell it laser cut and powder coated for the Trasnit HR/MR on our website if you can't find it locally.
You did not cover the various configurations available with Unistrut, such as the slotted version and other hardware that can be utilized with it???
We’ll plan a follow up. I was clued into a few other cool options. Thanks fir the suggestion!
Would cold bluing work to seal the cut enda of unistrut?
I’m not sure. Probably. Just depends on your climate. Here in CO it’s pretty forgiving.
Why did you not show aluminum strut channel? It comes with holes, slots, solid backing. 12 and 14 gauge. Many people are using it to mount solar panels since it does rust and you can cut it to custom lengths.
I totally forgot about Aluminum strut! Great point. I used to work at a shop where we used it on the roof for solar mounts. I was in the mindset of interior mounting solutions and we didn’t consider Aluminum. Thanks for the comment.
Do you know if it comes in a shallow version? I’ve only seen it in the 1 5/8 deep configuration.
@@AVCRIG yes, 14 gauge
I get small quantities of aluminum strut channel from McMaster-Carr. They have standard and low profile in aluminum.
What are your thoughts on using t slotted aluminum extrusion tubing vs unistrut?
T slot is another option. The hardware is also specialized to a degree. Personally I still like unistrut. T slot has its place (we use it on our roof racks) I mostly see it in cabinet framing.
@@AVCRIG yea yea, i gotcha. always pros and cons when making these decisions.
@@AVCRIG awesome videos btw. thanks for sharing!
Why dont you use aluminum unistrut?
How about stainless unistrut- yes bit more $ but now worry about corrosion etc?
*no
I didn’t know that was an option. I guess it makes sense. I’m thinking we’ll need to do a follow up video with all these suggestions. 👍👍
I guess L-track can be anodized in colours so its not so in your face, imagine those floor pieces in black. maybe low temp plastic coated or epoxy
Behind walls, unistrut. Exposed I’d use L track. 80/20 could be either.
Unistrut and L track has different purposes even though they “could” be used similarly. 80/20 is the best of both worlds.
Why would you not compare L track to 80/20 instead of Unistrut? BTW, 80/20 does not have 1” increments either and it is much lighter than unistrut
You’re absolutely right. That would be a great addition for a future video. Most of the 80/20 we use is for racks or framing, but it would make a good rail for attachment.
“Aluminum is lighter than steel” but steel is heavier than feathers
In Terminator Salvation the boss terminator was decapitated with a piece of unistrut.
What are you looking at?!?!?
All of you watching me. 🤓
Yo, stop moving the camera forwards and backwards! Otherwise great video!
Haha... good input! Thanks
E Track is cheaper than L track but larger and less pretty.
For me style points win in that department.
Is a retired structural engineer I have to say your knowledge of structural design is very lacking
Is there anything specific we are lacking in? We’re always open to discussions and learning.
I saw this comment, watched again looking for the errors. I'm very happy you're retired. He didn't use the proper words, but he does seem to understand yeild strength and plastic deformation well enough.
You must be fun at parties…..
@@AVCRIG. first, a chain is only as strong as it’s weakest link. if your bolts are 8 cents they are not grade 5 steel much less grade 8, they are grade 2 or more likely unrated, Chinese garbage. I would not use anything less than grade 8 bolts in any vehicle. in case of collision, the extra $20 vs getting hit in the back of the seats and head by all of the cabinets that break loose in a front end collision or roll over is a no brainer. BTW, get your grade 8 bolts from Zoro, not Home Depot, for a fraction of the cost. Sign up and get free shipping if over $50 and occasional 20% off
@@rubikmonat6589 do you think his statement that every time steel is bent it returns to its original position is accurate? He didn’t use those exact words but that’s what he said, and he certainly didn’t use the terminology that you used how can anybody that knows anything about structural design not find fault in the fact that he didn’t even discuss grade 5 or grade 8 bolts, but instead discussed using bolts that cost eight cents
Hello can you or any watchers explain how and what you used to the bed columns I see behind you as well as installation??? Thansk
Those are part of our Seasonal height bed system. We’re working on perfecting it to offer up soon.