step two is quite confusing. As there is only one hole, and that's where the safety pin goes through, where does the hand screw go? I can't figure it out at all, my hand screw seems to have no function (the one on the top of the base)
The screw just stops it moving around and the pin takes the weight and secures it from dropping. Please do reach out to customer service if anything else is unclear!
The pin sets it close but the adjustable legs allow you to tinker for your own setup. Some people with uneven floors don’t find a standard height useful so there is room to manoeuvre! Best to measure it for perfect height for your setup! Hope that helps!
Unfortunately, I removed the screw at the bottom of the stand (for fixing) during assembly and now I can't get it back in. Do you have any tips? Can it be left loose in the stand ?
If you removed the screw then perhaps the inner bit of plastic has fallen into the pole? If you turn it upside down or shake the legs to get that piece you can hold that on the inside of the pole as you screw back through it. Hope this helps
Crikey hope it didn’t damage. The plus side of these plates is that you can actually do more to secure it than just a single slim flat plate I’ve seen on others. Can depend on your combination as to what secures it best for you. This should generically work for most though.
@ Just ripped out small piece of board material. But going to try additional plate and using more screews into the board. Probably the problem can be everyday installation of the stand or just its better to use more screws. :)
Good question. The boards it is compatible should be listed. We are working on a video for the electric boards and we did install one on a stand as the base plate has flex for many boards to be mounted.
The boards usually come with brackets and screws. They can be used on this if its a standard bracket fitting as they are fairly universal. This will goive you all you need to level it and the mounting plate has a few third party holes for you to attach other systems to it as well! Hope this video helps and let us know how you get on with your new setup!
To be honest you can use other screws if you are referring to the centre screw for your board. provided the head of the screw is wide enough and doesn't slip out and you don't get one to long its pretty easy to replace.
I was gonna ask about being able to rotate the board without making new holes in the board but you may have just sold me on this stand
step two is quite confusing. As there is only one hole, and that's where the safety pin goes through, where does the hand screw go? I can't figure it out at all, my hand screw seems to have no function (the one on the top of the base)
The screw just stops it moving around and the pin takes the weight and secures it from dropping. Please do reach out to customer service if anything else is unclear!
perfect
Great glad it helped!
Is it always the right height? Is there a Mark on the pole how heigh the legs must be,
The pin sets it close but the adjustable legs allow you to tinker for your own setup. Some people with uneven floors don’t find a standard height useful so there is room to manoeuvre! Best to measure it for perfect height for your setup! Hope that helps!
Unfortunately, I removed the screw at the bottom of the stand (for fixing) during assembly and now I can't get it back in. Do you have any tips? Can it be left loose in the stand ?
If you removed the screw then perhaps the inner bit of plastic has fallen into the pole? If you turn it upside down or shake the legs to get that piece you can hold that on the inside of the pole as you screw back through it. Hope this helps
Does it really stick to just one screw ? The target didn't hold and fell off my stand onto the floor. :D
Crikey hope it didn’t damage. The plus side of these plates is that you can actually do more to secure it than just a single slim flat plate I’ve seen on others. Can depend on your combination as to what secures it best for you. This should generically work for most though.
@ Just ripped out small piece of board material. But going to try additional plate and using more screews into the board. Probably the problem can be everyday installation of the stand or just its better to use more screws. :)
How to install electric dartboard, im thinking of buying karela premium silver, is this dartboard compatible with that stand.
Good question. The boards it is compatible should be listed. We are working on a video for the electric boards and we did install one on a stand as the base plate has flex for many boards to be mounted.
ooo but how you know height from center to land?
Hiya, just bought this, do I need to get my own screws for the actual board to connect it to the mounting bracket
The boards usually come with brackets and screws. They can be used on this if its a standard bracket fitting as they are fairly universal. This will goive you all you need to level it and the mounting plate has a few third party holes for you to attach other systems to it as well! Hope this video helps and let us know how you get on with your new setup!
how to mount koto royal star 315 electronic dartboard on this?
I have been on nights and i have no clue at all how to even do step 2
Make sure to unscrew the bolt to allow the pole to slide down into the base! Simples!
What can I do if the center screw bends and it won't screw back in ?
To be honest you can use other screws if you are referring to the centre screw for your board. provided the head of the screw is wide enough and doesn't slip out and you don't get one to long its pretty easy to replace.
The screw on the bottom of the mount isn’t going in. Any help?
Hi Danny, Please send an image of what you are having issues with to our customer support team. They can refer any images to me if I can help I will!
Is hij ook geluidloos? Ideaal voor een appartement?
hij is niet stil maar doet zijn werk goed.
Misschien kan je van die foam wedges er tussen doen ? Helpt altijd
Ja het is vooral voor de buren die horen gedreun tegen de muur aan maar is dit opgelost als ik dit standaard koop? ☺️
@@SimRic445 lees eff hierboven hihi
@@mandy7266 zal het je z.s.m laten weten ik heb hem besteld en met mazzel is hij morgen binnen
The 2 screws.... need to get ya own?
Hi Sorry what do you mean?
Kun je dit ding een beetje meenemen of gaat dat niet? Kun je hem in de auto mee nemen op vakantie bijvoorbeeld?
Yes. Many pro's and county players or tour card holders take a stand which collapses down and can be placed anywhere!
Worst design in the world, if the bottom screw comes out literally no way to get it back in
Please contact our customer service team who will be able to help you.