{248} How To Repair of LED TV Backlight Strips / How To Test LED TV Backlight Strip With Multimeter
HTML-код
- Опубликовано: 22 авг 2020
- in this video i demonstrated How To Repair of LED TV Backlight Strips / How To Test LED TV Backlight Strip With Multimeter
#repair
#backlight
#strips
E469119 strip in in 32 inch LED tv, it consists of 7 LED in each strip and total 3 strip, all of them are in series. i explained how to test this it using digital multimeter specially when we dont have LED backlight tester. so without led tester we can use multimeter, 3.6 volt battery or 9 volt battery or using a regulated power supply. and we can replace strip or we can repair individual led
How To Repair of LED TV Backlight Strips,
How To Test LED TV Backlight Strip With Multimeter,
how to test led strip with multimeter,
e469119,
led test video,
led tester for tv backlight,
.test led backlight with multimeter,
test led backlight,
haseeb electronics,
how to repair led backlight strip,how to repair led backlight strips,repair led backlight strip,led tv backlight strips repair,how to repair led backlight,how to test led backlight strips Наука
Thank you for sharing this video. 👍. I would recommend to replace the entire strips instead of single LEDs. Otherwise you will do this repair again and again on remaining old LEDs.
What do you mean entire strips??
The whole old backlights ?
@@jn9550 I mean the complete white lines. There are new ones available for most TVs and it make sense to replace it complete, because of the effort to open the TV display.
@@hugoegon8148 the enti6tv Backlight ( whole Backlights) ?
@@hugoegon8148yes make sense I broke the led panel while opening my entire exercise went waste had to throw 4 years old Philips tv
@@Jam-sh8oj Oh je, thats a pity. But it happens very easily, especially if the LCD panel is only lying in the case frame and very fragile. Cheap manufacrured, but nearly impossible to repair. 🤨
हसीब भाई बहुत ही अच्छा लगा आप हमारी इछा होती है वेसे ही आप विडियो पहेले ही बनाडे़ते हैं बहुत बहुत बधाई नमष्कार
MashaAllah MashaAllah.. superb.. very informative upload.. jazakallah for sharing....
Allaawww hmesha ki trha...plz keep visiting from🇸🇦🇸🇦
Mashaallah very detailed information and very Good presentation thoroughly watched and enjoyed your work. thanks for great sharing
Great. Super professional you are my sweet brother. I am learning many things from you.
.आपकी जीतनि तारीफ करे ऊतनी कम है सर
सर हमारे तरह जैसे Technical institute पैसे के कारण join नही कर सकते
आप हमारे लिये भगवान आल्लह हो
Nice Guru always Happy u all family
Nice guide on diagnosis and workaround as well as permanent repair.
Ma sha Allah very useful and helpful vedeo 👍 stay blessed happy and healthy ameen ❤️
Very well explained Haseeb.. thank you !
Another very informative and helpful video
Thanks for sharing this video brother
God bless you always 🤲🤲❤
I especially like watching the repair videos. Very helpful...
Fantastic tutorial video Haseeb. You are doing a good job
Thank you for the video. I have a LG 60 inch screen that went very dim but not dark. Before I make a mess of things is this a partially open LED issue? Are all of the strips is series with each other or are there multiple circuits? It seems on your TV the strips failed one at a time or did the four LEDs all fail at the same time, possibly from a power surge?
Very good janab duwa ha ap khush rahy
very informative, keep up the great vids Haseeb,
Great ..
Really super professional
YES two options are there repairing or replacing
thz ENG
Twenty lyk ke sath Bhai informative upload
very informative videos brother especially for those who have interest in electronics or studying electronics.
LCD penal is also gand phr for beginners.😂😂😂
Amazing content and great talent you have boss
Thanks for sharing
Keep sharing
very informative video full watch brother
Another informative upload.
Nice and informative video shared bro. Keep up the spirit high and keep sharing the good work. Appreciate it alot.
💫 you are a star dear.learned so mutch from your videos.
Very informative 👍
Wonderfull sharing 👍👍👍👍
Very Nice Sharing Bhai Jan
What were you using to remove the leds? It looked like a basic soldering iron but what was that noise, was that actually a desoldering iron? It didn't look like it.
I'm wondering if I should buy a backlight tester or if I should just buy a benchtop power supply?
Excellent information
Even if leds light with an applied voltage, could there still be a rouge led that requires extra current and the tv power supply cannot deliver this current?
Do these TV's have a max current that they will not deliver above?
Hi haseeb,why wont the universal 12v backlights not work in my tvs? But when i test the lights with backlight tester they all go on.
Wa aliqumuslaam informative upload
Thanks very informative
very nice information
nice video stay safe big like 84
very happy to see you
New friend Goodluck, full support.
Nice information !
Great knowledge sharing 😍👍
Nice. Thanks for the tips
I am always waiting for uploading your videos .thanks. but please upload some videos about tv mainboard and tcon board and also backlight driver section of tv smps in details and please put them in priority to upload. Again thank you.
Mashallah ❤ beautiful video thanks
Slamat raho bhi
Walikum Salaan janab bhai Saab Stay blessed
Nice information thanks for sharing
Excellent video
Keep sharing sir,,
Great knowledge
walaikum assalam
Masha Allah
nice sharing...
stay connecting....
is it possible to replace only 1 broken led instead of the entire strip? if so, what is the led reference? any led with 3v will do? or does it depend on tv brand and model?
Thanks for sharing your knowledge... And the tips..
it is my pleasure
very informative my frd
Good sharing
Is there a link for the LED's, I am not sure what they are (note: not the LED strips which cost $70.00). I have the VIZIO E50x-E1 TV.
Fantastic. For the testing idea
it is my pleasure
you can also check video number 556
please
Like done Ji.... full watch bhai sahab🙏
best teaching
My friend i would like to ask what is the name of connector from led to main board the white one with 2 pin
thank you
Brilliant idea - Thank you
You’re welcome 😊
Haseeb, What current do these draw on the 3v power supply?
Sir,i have a LED TV backlight with two led strips faulty,i remove it, but didn't soldier the bad legs of the two bad ones together,i fix it but didn't bring backlight of others... should i soldier the two bad ones just like you did in the video for testing,and will it not look like fuse reading when i do that.
Thank You Sir! It is very helpful.
thanks a lot
Thank u sir......and love u.....
V informative
Walkum aslam 91 great video
nice job dear bro thanks for sharing
stay blessed
very nice THX
Most welcome
Very good friend
thank you master
Excellent video.
best regards
like 30
I wish you a very successful week. regards.
great movie, i really like your channel. Yours sincerely like 30
Thank you 👍
Very information
Hi my friend ♥️ you very smart 😊 give you super 👍
Very informative video. Very interesting but we can't do it.it is so difficult for us.we can damage
nice one
My LEDs seems to be working when I checked with multimeter but when I connected power none of the LEDs light up. What else could be the possible issue.
Did you make that hot air gun?
Sir thank you so much for your all vedios
I have backlight problem with my 65"skyworth led TV when I release stand by backlight just flashes and turned off
no sound or any display
please check STBY / PWR ON Circuit. it is not going to Power ON interlock
please send the board model number
and PSU model numbers
Very good video
best regards
Allah kosh rkhy amin
Walekum assalam. Thanks
it is my pleasure
You are my hero
It is my pleasure
Nice video 🌹🌹🌹
What heatgun is this?
Sir I have lg 40 inch led backlight tv. All leds are not functioning. Now how to find led operating voltage.
You teach me a lot sir. Be blessed
best regards and special thanks
Please more TV troubleshooting videos
Thanking u sir
Do you need LCD TV backlight belt?
❤
After replacing the LED one can paint the darkened strip area with white paint to reflect the light again.
Nice
will the tv work normaly with shortened led soldier points instead changing like you did for testing?
shorted led points will cause to blur or dark display in that specific area of the display panel
سلام و علیکم It would be best if you brother، show the picture after remount the TV set to show how is qualificatio of the picture, I.m shure, it will works ?!, the idea is very good , but how it will be
Gjb
Thanks for teaching, great job.
So i followed all instructions and replaced bad LED's. Once i turned it on all lights ligted up and then TV went to stand by again, checked LED went bad again.
Changed 2-nd time and same LED's went bad again.( Insignia TV).
Can you tell me what went wrong and how to test it? Thanks.
.can you please check video number 566 and 565
might be replaced LED is not with current matching
or may be the LED driver is uncontrolled, (feeding over voltage to the LED strips)
Voltage is same, i have LED tester.
"feeding over voltage to the LED strips" ??
How to check it and what to check it? I have multimeter.
Thanks.
Big like
I have a question. I’m looking for individual led lights any help would be appreciated.
Universal 3030 6V 200mA SMD Color temperature: 12000-16000K (cool white)
2835 6V 200mA LED for cold white light 15000-20000K color
7020 6V 80mA for cool white Color temperature: 15000-18000K
you can purchase online
Cette vidéo de montre pas le moment où la TV est tombée de nouveau en panne quelques jours plus tard. Pourquoi le remplacement seul des LED HS ne fonctionne que durant une période limitée ? Pourquoi ce sont d'autres LED qui claquent successivement ? Pourquoi faut-il en réalité remplacer toutes les barres de LED pour que la TV fonctionne de manière pérenne ?
Sir, please if power ic is burnt and you cant find the part no. or equivalent, how can you modify it
@@HaseebElectronics Sir please i meant the power ic (PWM) in the SMPS