Это видео недоступно.
Сожалеем об этом.
IC-9700 Internal Terminal Mode
HTML-код
- Опубликовано: 28 июн 2019
- How to setup a Icom IC-9700 for D-Star DV (digital voice) Internal Terminal Mode and make a pure IP connection to reflector XLX227 B from your QTH (home) network. More info and diagrams in my blog: davidcappello.com/2019/06/29/...
David - KG5EIU, great work with this video. I just made a QSO with Marius, YO2LOJ! The instructions that you provided for the IC-9700 Terminal Mode worked perfectly! It was so easy with this video! Thank you very much. 73! KJ7CSM
David you are providing great information here. Much appreciated
David, thanks so much for this and the web page...I've been looking for this for a while so you are very much appreciated! See you on the reflector! 73 de Robert K3RRR
Seems to be working - Glad to see you out on XLX227B ! :)
@@davidcappello i get the red cross - like sad (below comment) port UDP40000 active against my ip on network for radio 192.168.1.11 (ic9700) . what is the issue here? Is there an international block maybe? Im in Australia.
thanks
@@martingibson8273 You are not getting out and back to the reflector you have setup up - double check your settings and home router - you need to see the return arrow and not the red cross/X - I doubt there is a block but you never know - perhaps try to ping the reflector from another device on your network.
Wouldn't take a Terminal/AP call sign. Also opening ports for linksys needs an application name. Guess I need to dig more into this. Glad this all worked for you folks.
It seems to be a masking issue with the firmware, as will not accept G1ZHD H but will accept G1 ZHD H
@@adamg1zhd I will try that.
Put "H" in 8 position!!
I am guessing this setup will work with the IC-705 through the WLAN. I have registered with our local Dstar Repeater. (I can get my radios to run though a repeater which is to far from home or my openSPOT2 works.
What is the Terminal/AP call sign? What do you use and do you have to register it somewhere. Do you need a windows machine to run this? I am guessing no.
is it normal for the IC 9700 to have a sort of time out on receive on the terminal mode after you don't press the PTT? tnx and 73's your video helps a lot.
Now working with CQ-UK on XLX922E
great info, im still trying to get it to work
Reach out to me if you need help - will get you going
@@davidcappello I will! thank you!
Does this work in Australia or are these reflectors only allowing US access? Cheers VK2VRJ.
2:02 He gets into the DV settings.
One mistake I made setting up resulted in repeated errors with bad terminal AP call sign. The manual is none too clear, and support at Icom never caught the problem with a many reply back and forth support ticket. Those of us with a 1x2 or 1x3 call sign need to add more spaces between the call sign, and the designation suffix. If you have a 1x2, you need 3 spaces behind the call. Maybe just I fell into that trap, but if you get a "terminal/AP call sign" error, here is the culprit.
Thanks, your comment just solved my dilema!
Hi David ... could you explain why it works in this XLX and not in others? .... Do you know any other type of reflectors (REF, DCS, XRF) that accept the Icom terminal mode?
Terminal mode should work if allowed with G3 software from Icom on the D-Start stack. You can access XLX227 B since it is the only known reflector with additional software loaded and needed to accept/use connections from the 9700. More info in here and in the comments: davidcappello.com/2019/06/29/icom-ic-9700-internal-terminal-mode/#more-2826
Hello David,
Thanks for the upload.
I own a 9700. Do you know if it's now possible to connect to additional reflectors using this ethernet approach? I'd like to be able to use REF001C or RE079A this way instead of having to buy an OpenSpot.
Many Thanks,
John M7JHA
Hi John, you can only connect to "things" that support the terminal mode - right now there are several XRF reflectors that have the code support - see my post and the notes at: davidcappello.com/2019/06/29/icom-ic-9700-internal-terminal-mode/
@@davidcappello Thank you David. I will have a look.
Thank you ! KO4MAX
David, can You explain how to setup the Access Point Mode with a D-Star handheld radio (I am using the IC-92 and want to use the IC-9700 as a AP to work on DV mode?
I read the advanced manual but still have some issues with the AP settings and it's not working with my IC-92.
tnx 73 , Bernd
The only Icom HT that I am aware of that will work in Access Point Mode is the ID-51A Plus2 - but any of the other Icom D-star radios should work fine as an access radio to any Icom running in Access Point Mode. I have not set up the IC-9700 in Access Point Mode in terminal mode (yet), but I have understanding it works just fine. I am also not familiar with the IC-92 at all.
@@davidcappello So I will wait until you tried the setup. I used several settings but it failed.
Getting yellow arrow on xmit then turns red x down link green arrow no audio in or out
Terminal mode is great if anyone would explain how to actually "talk" to other hams via the terminal mode. I have watched many videos explaining how to terminal mode my IC-9700. OK, I did it, it connected to a server....NOW WHAT? Do I yell at the radio? What's the next step to actually "talk" to someone on Dstar?
After you successfully connect - key and toss your call sign out see if anybody else is online and listening.
Hi David, this is a great Video, however I got something wrong, when I press PTT I got a red cross on the top of the Up arrow, do you have an idea why?
Thanks for the kind words - so the red X you get when you press the PTT means you are not "making it" to the remote side/reflector - what reflector were you trying and double check your typing of the hostname.domain.name or the IP address. Keep in mind "normal" reflectors like REFXXX are not supported.
@@davidcappello we are using XLX269, it’s a reflector made by us , apparently he is up and running, but unless something else is wrong we found out that port 40000 wasn’t open on the router, so we already ask to open it and then we will try again. If you want I can give you the details for you to test. If you don’t mind of course.
Can you save the settings in the memory for each of the target reflector you want to use? tnx.
Sadly not that I am aware of with the current software in the radio.
Hi how did you get 446 on your 9700? As mine don't do. Is there wideband Mod please?
No mods - this is a USA radio.
Followed your instructions to connect to XLX227B and it connected but never got anyone to answer me?? No one ever comes back to my call? Did I miss something? It would be nice to connect to any of the other XLX's but you currently can't.
is your call sign registered in the d-star network?
I have a question that someone might be able to help with, how do you 'find' the reflector/gateway IP/web address to connect to? I can't seem to find any search service that provides the local country reflectors to connect to, it seems that my searches always hit a brick wall on the topic. I can't get past this issue, unless i connect to the one in your video. Any help is appreciated from anyone in advance, thank you kindly.
So take a look at any reflector list - as an example: xlx.davidcappello.com/index.php?show=reflectors look for reflectors that say they support terminal mode - example: look at the entry for the XLX102 reflector - if you click on that it takes you to a web page xlx102.xlxreflector.org/ from there you know that the Gateway Repeater (Server/IP Domin that you would enter in the Icom xlx102.xlxreflector.org Since module B looks like the place to be you for the TO you would use /XLX102B hope that helps
@@davidcappello Thank you kindly for this, i just tried and keep getting the red X next to the cloud, might be a connection issue in the home network, i will go ahead and diagnose to see if I'm getting any connections out and get back to you. 73
@@johns2808 Okay John - hit me on on my contact page - happy to do a virtual meeting with you - will get you going. davidcappello.com/contact/ or I am good on QRZ
2:22 Setting Internal Gateway Settings
Dear David, Can we use frequency bello 144,000 MHZ on this IC-9700?
Not that I am aware of NO. (besides my US FCC license is good from 144 to 148 only)
@@davidcappello Thank you MR. David. I currently have a Yaesu FT-991A where it is usable at 143,312 even though in the specs it says 144 MHz. I have a license for VHF FM under 142-155 and for HF 2.7 above. I plan to buy IC-9700 and have to ensure that this 9700 can work 143.312 Mhz. If you don;t mind, could you please check for me whether 9700 is also can transmit 143.312? Thanks 73
I am unable to verify 143.312 that is outside my operating privileges here in the US FCC. With that said I am unable to even tune my 9700 over to 143.312 to listen - I have the USA 9700 perhaps check the manual for EU models they may be able to tune lower than 144.
how do i find the ip address of a certain reflector say xlx013 so i can set my server address? im new to this
Don’t need the ip address you can use the hostname and domain name - xlx103.xlxreflector.org basically the url to the dashboard but without the
So for xlx013 it is xlx.bigvortex.com just look on any dashboard from a reflector list
How does one back out of internet D-Star mode back to pre programmed satellite personal presets without having to re-upload RT Systems software user backed up file?
go to menu 2 DV Gateway and disable it (select normal mode)
@@davidcappelloWish that worked. All that does is it goes back to terminal gateway mode. It does not exit out of it.
@@davidcappello I was hoping in terminal mode using internet one could RF in and RX with a handheld or mobile radio using the IC-9700 as a link similar to C4FM Fusion. Thanks for your reply.
what's the purpose ? ham Radio without RF isn't ham radio, its just an expensive VOIP box
i followed this very carefully about 10 times i get the red cross when i key up i can not get mine to work or log on like shown in video.....im frustrated with this now.
Sad..did you fix this problem? i have the same.... what was it?
@@martingibson8273 it gets worse, I made a qso and then I got the cross
Hi there - I’m having exactly the same issue. All my settings are identical to all the help tutorials I can find EVERYWHERE and yet I still get the red x. Cannot get rid of it.
Im registered, upd ports open. Cant think of or see any other problems and yet cannot get terminal mode to work.
@@robvk3626 same here
What about the terminal/AP Call sign it showed incorrect !!
Make sure the terminal/AP call sign is exactly 8 characters