Awesome, Glad I could Help! It always bring me joy when I help someone. If you want to learn more I have a complete course that teaches plumbing in Revit available at mepguy.com/
It's either using the reference level of the duct you selected or it's using the reference level of the current level. I'm not sure you'll have to test it out.
Another point is revit is telling this "Can't make type "M_Transition - Welded - Generic : Standard" when I am creating an out pipe from the lavatory...Any explanation please
If you need actual pipes from a specific manufacturer, you might be able to download their pipe fitting families from their website. For example, I believe charlotte has families located on their website. Check out this pdf I found after googling, www.charlottepipe.com/Documents/Revit_ReadMe.pdf For pipe material types you can create your own using know characteristics like roughness etc. Also, check out bimobject.com
You need to open the P-Trap Family and change it's settings. Select your P-trap after you load it in. You can select it in the project or use the project browser and search for it. Then click "edit family". On the properties panel, change the part-type from "Multi Port" to "Elbow". Check out my P-trap video at 1:20 seconds in. I do this very fast in that video. The full length P-Trap video is on my website. Since you are asking about this, I'll make an entire video on some tips and tricks for working with P-Traps. I hope this helps!
Get my FREE Plumbing in Revit mini-course:
www.mepguy.com/
Awesome, novice beginner level. I totally understand, I been having a headache for a week already. thanks
Yes Luis! We've all been there! Glad the video helped!
whoa, this is what exactly I’m looking for, thank you!
Awesome, Glad I could Help! It always bring me joy when I help someone. If you want to learn more I have a complete course that teaches plumbing in Revit available at mepguy.com/
hey man where have been exactly what I need thanks thanks a lot
I'm Glad I can help!
Thank you. Very good tutorial.
Thanks alot. It's really helpful to me although I am using a revit 2016 so very helpful brother...
You're welcome!
You've done a great job.
Thx so much!
great. simple but great info for beginners.
Yep was trying to keep things simple for anyone new to piping
Good video, I was hoping to see if you would show how to add a line number to some piping.
Do you mean like changing the line type to dashed? I have a video on customizing the line types. ruclips.net/video/vchk-enJqPs/видео.html
It was very helpful. Thank you.
You're very welcome!
thanks
Sometimes when I draw pipe or duct, by using create similar the pipe or duct uses another reference level, may I know why
It's either using the reference level of the duct you selected or it's using the reference level of the current level. I'm not sure you'll have to test it out.
Another point is revit is telling this "Can't make type "M_Transition - Welded - Generic : Standard" when I am creating an out pipe from the lavatory...Any explanation please
Try dropping the pipe down first.
thank you for sharing . very helpful!!!!
Thanks Mys! Glad you enjoyed it!
❤❤❤thanks engineer❤❤❤❤
You are very welcome!
🥰
thanks!
where do you download pipe families(different materials) also I'd like fabrication services. are these free downloads or do you need to pay for them?
If you need actual pipes from a specific manufacturer, you might be able to download their pipe fitting families from their website. For example, I believe charlotte has families located on their website. Check out this pdf I found after googling,
www.charlottepipe.com/Documents/Revit_ReadMe.pdf
For pipe material types you can create your own using know characteristics like roughness etc. Also, check out bimobject.com
whenever I select the elbow, I cant see trap in the properties even though I have loaded it in my project.
You need to open the P-Trap Family and change it's settings. Select your P-trap after you load it in. You can select it in the project or use the project browser and search for it. Then click "edit family". On the properties panel, change the part-type from "Multi Port" to "Elbow". Check out my P-trap video at 1:20 seconds in. I do this very fast in that video. The full length P-Trap video is on my website. Since you are asking about this, I'll make an entire video on some tips and tricks for working with P-Traps. I hope this helps!
@@mep_guy omg you are the savior! Thank you so much! Now its very much easy for me. Thank you again.
@@arunrajrajagopal5845 No problem. If you ever have any more questions just let me know!
Thanks sir 🙏
You are very welcome! If you have any ideas for new videos please let me know!