Those ESCs look totally metal. I want one of these stacks. Had quite good experience with Kakute FCs in past. Atlatls VTXes though burned few in row, but FCs and ESCs was always solid on 4S. I hope that on 6S they will still work the same.
I just had 4 of the same ESC's & 4 Matex 30x30 H7 FC's show up in the mail yesterday! Already got one into my main 7" & I can't complain 😅 Now the question is how long is it going to last? From the component choice & build quality of both hoards I'm confident its going to be a good long while 👍🏼
I'm late to this review. I'm an EE into drones and this is a masterpiece FC and ESC board. Going in my next build. Also - subbed - excellent video and thanks.
Can you wire a holybro ublox m8n gps module to the kakute h7 I read something on using the i2c and cutting a wire back thanks your videos have been a big help to me thanks again
Hi DM: Great Vid just wish i saw it before getting the KAKUTE F7 HDV, would you know if it's possible to use a analog Camera on this board by using the wires from the DJI plugin or do I just wait to purchase a DJI unit, Thanks.
I feel like I'm missing something... Arducopter requires over 1mb, yet H7s are super rare compared to F7, especially F722s. Which only have 1/2MB which isn't even enough to run betaflight, correct? Why are F722s the most common in a landslide? What am I missing? I am building my first Quad, and I would like a MCU that is both futureproof and large enough to run any firmware. Being an engineer, ultimately, I want to develop a drone with new capabilities, such as the ability to self charge, automated patrolling, flir, etc -- so the extra I/O is also desired. Although expensive, H7 seems to be the way to go?
The other board u speak of is the logic board and isolates the power delivery board and is a good thing to see. The V1 version of this esc had some issues but this is v3 or v4 I think and this esc is a monster. I have 2 of these escs and just purchased the H7 FC for a cinelifter i'am building. I also have this esc in a 5.5" cruiser and no issues. I wish it wasn't so expensive but if you look at the components its hard to scoff at.
WOW! ; ) Why did it take me so long to find you? ; ) As many of us know H7 FC's have MORE than enough RAM to run FULL Ardupilot/iNAV/Betaflight etc. If I want to run: H7 (full Ardupilot): WITH DUAL/TWO HD air units and a digital air speed sensor in VTOL Wings, can you/anyone recommend a list of H7's FC's that can manage that?
Yes please! Build it!! Can’t wait to see it. I was just thinking to buy this stack for my next build. Great video as always bro!
Planning out all the bits for my 5” build - may have to go with one of these. I like the idea of plug and play with the digital unit.
Thanks man!
Those ESCs look totally metal. I want one of these stacks. Had quite good experience with Kakute FCs in past. Atlatls VTXes though burned few in row, but FCs and ESCs was always solid on 4S. I hope that on 6S they will still work the same.
The all metal esc is the best hands down
Looks awesome. What I'd like to see, is you putting all 8 of those motor outputs to use. Build a cinelifter! Edit: with dji preferably.. 🤘
I just had 4 of the same ESC's & 4 Matex 30x30 H7 FC's show up in the mail yesterday! Already got one into my main 7" & I can't complain 😅
Now the question is how long is it going to last? From the component choice & build quality of both hoards I'm confident its going to be a good long while 👍🏼
How are they holding up?
Yes build it for analog
Are you gonna do anymore ESC torture tests?
I like holybro great vid
I’m dropping the f4 esc mini and the mini H7 in my Kopis pusher
So if your not using DJI controller you will need to remove 2 wires from the Air unit to FC plug correct?
This vs the mamba, which is easiest for beginners?
Great job man!
Build, build, build video, Mr D! 🤘😜. (Cinelift 🙊)
Great stuff drainman!!
Thanks.
Pretty stoked when I saw it.
Gettin' the 65A full stack on the way, any day now.
Should be a sweetheart, too.
I'll let you know.
p.s. subbed too [wink]
I'm late to this review. I'm an EE into drones and this is a masterpiece FC and ESC board. Going in my next build. Also - subbed - excellent video and thanks.
Im also an EE. I have this fc and 65a esc in 3 quads now. It's the best stack I have ever used
man those plugs are moving a lot when youre touching them.
yup build it up analog will do just fine! great review!!
Can you wire a holybro ublox m8n gps module to the kakute h7 I read something on using the i2c and cutting a wire back thanks your videos have been a big help to me thanks again
First good videos brother
Can this be powered by a LiPo?
Make a video of how to make a waypoint drone with obstacle avoidance please! =D
Hi DM: Great Vid just wish i saw it before getting the KAKUTE F7 HDV, would you know if it's possible to use a analog Camera on this board by using the wires from the DJI plugin or do I just wait to purchase a DJI unit, Thanks.
He pointed out the analog in & out solder pads. This H7 handles one analog cam. The Matek and Luminier H7s handle dual analog cams.
I feel like I'm missing something... Arducopter requires over 1mb, yet H7s are super rare compared to F7, especially F722s. Which only have 1/2MB which isn't even enough to run betaflight, correct? Why are F722s the most common in a landslide?
What am I missing?
I am building my first Quad, and I would like a MCU that is both futureproof and large enough to run any firmware. Being an engineer, ultimately, I want to develop a drone with new capabilities, such as the ability to self charge, automated patrolling, flir, etc -- so the extra I/O is also desired.
Although expensive, H7 seems to be the way to go?
Hum.. the ESC looks a little sketchy with another board soldered on it, with the heat flex and a few crashes I would be worried..
The other board u speak of is the logic board and isolates the power delivery board and is a good thing to see. The V1 version of this esc had some issues but this is v3 or v4 I think and this esc is a monster. I have 2 of these escs and just purchased the H7 FC for a cinelifter i'am building. I also have this esc in a 5.5" cruiser and no issues. I wish it wasn't so expensive but if you look at the components its hard to scoff at.
I feel like I’m getting really low lq on this stack do you know of anything like that with these boards
WOW! ; ) Why did it take me so long to find you? ; ) As many of us know H7 FC's have MORE than enough RAM to run FULL Ardupilot/iNAV/Betaflight etc. If I want to run: H7 (full Ardupilot): WITH DUAL/TWO HD air units and a digital air speed sensor in VTOL Wings, can you/anyone recommend a list of H7's FC's that can manage that?
Wow great video
random question..Could i use a crossfire antenna as a ufl vtx antenna?
nice vid Fettech vs kiss ultra?
worth the money, buy nice or buy twice
I love my Matek but, this looks awesome @2:12
will this be compatible to flash INAV to?
Soon!
Are you getting these in stock?!
You think k our hobby will benefit from LiDar?
🤘🤘😎😎
Holybro ? No thanks
Whats wrong?