Two you recommend two of the radio units or can one get by with one radio unit? Very inspiring setup. I purchased the panel with parts installed to use air manager. Thinking about building the radios and auto pilot but maybe just buy them and get flying sooner.
When doing VOR navigation and you want to do ILS \ VOR \ DME access at the same time, it is recommended that you have 2 radio units as in a normal plane.
Amazing job! I wish you would do a deep dive into the steps required. Honestly, with those plans you should be able to produce those and sell them. If you can make this (without TVs, iPads, Computer, yoke, rudder) for under $1000 and still make money, you should.
Absolutely, good job! Your work here is inspiring, and I would like to know roughly the dimensions, measurements of your panel, as I am in the process of putting together a sim for myself! Thanks for sharing!
@@musica-fx9un HY I Use 3 screen 55" 4k and Anther one 22" for my Flight guides. My Pc Working Great With I9 gen 10 - 2080 TI Graphics Card. 32 GB RAM. WIN 10
Yes, great video. Can you share how you wired the knobs and other controls, and how you connected them to communicate with the MSFS 2020? Many of us want to learn and try.
Can be purchased on Amazon www.amazon.com/-/he/Logitech-Flight-%D7%9E%D7%A7%D7%A6%D7%95%D7%A2%D7%99%D7%AA-Throttle-Quadrant/dp/B07QXMTNPB/ref=sr_1_2?crid=3N7OJCBIDZ3SO&dchild=1&keywords=flight+simulator+controls&qid=1625944803&sprefix=flight+%2Caps%2C293&sr=8-2 www.amazon.com/-/he/Logitech-Pro-Flight-Multi-Panel/dp/B01LWRNBI0/ref=sr_1_6?crid=3N7OJCBIDZ3SO&dchild=1&keywords=flight+simulator+controls&qid=1625944855&sprefix=flight+%2Caps%2C293&sr=8-6
hy. The simulator consists of a large number of parts from different companies that have been collected over the years. It's hard for me to give an precise price ,but i believe it, $ 10,000 only parts
Good evening, one day you can make a video explaining how to use the plane maker of x plane 11 to be able to configure the views of the three monitors as you have configured it since I see that it is necessary to learn and no matter how much I look I can not find a tutorial that I explained exactly how to achieve this type of views since the wings are seen on the screens and the nose in the main one, I also understood that the configurations vary according to the size of the monitor, the resolution, etc. (I hope one day I can make a tutorial explaining the step by step of how I achieve that configuration through plane maker thank you very much in advance)
@@Shimon73 Honestly, that yoke is bad. You will be much better off with a better yoke. If you want to spend some money but get the best, check out brunner yokes.
Really could have left the music off, man. I only need one screen so when I hit Minimums I either see the Runway Environment & Land or Go Missed. Really great simulator, Bro. Need more info on the build.
1) la musica di sottofondo è insopportabile 2) perché simuli "solo" un 172 se hai un simulatore di bimotore? 3) con tutti i soldi che hai speso, potevi comprarti un vero aereo e volare realmente
That is one of the nicest simulator builds I have ever seen!! Well done!
thank you friend
This is cleanest home sim i seen, not overly complicated or sketchy looking, very impressed.
thank you friend
Great simulator Shimon! It looks awesome!!
Congratulations from Brazil !!! Beautiful work !!! Good Job!!
הי, אני גם חניך במגידו עכשיו. כל הכבוד על הההישגים ועוד יותר על בניית הסימולטור. מדהים לראות כמה ריאליסטי בנית אותו. רואים את האהבה שלך לעניין.
תודה רבה גבר
WOW! 🥹 Love it! 😍 Greetings from Germany and good flights ✈️
Very nice simulator. Great work! I really like your setup with the three TVs. Thank you for sharing your sim build.
thank you friend
I also have 3 55” TVs, but can’t find the right set up for them. Could you please share the settings for the side monitors?
GREAT BUILD!!!.. VERY PROFESSIONAL....
I would say , awesome job on gauges, I fall in love with your cockpit, Brawo 😉👍
Thank you
The best I’ve even seen, Thats Amazing!! Good Job!!
thank you my friend
Cool Project. Feels like you did it.
Can you post, what Software simulator are you using. And all the parts you are using and how you integrated that with the software?
Great work! Very nice simulator!
Super work 👍 Congratulations
What pedals are those
How did you get the gtn750 on the c172?
Two you recommend two of the radio units or can one get by with one radio unit? Very inspiring setup. I purchased the panel with parts installed to use air manager. Thinking about building the radios and auto pilot but maybe just buy them and get flying sooner.
When doing VOR navigation and you want to do ILS \ VOR \ DME access at the same time, it is recommended that you have 2 radio units as in a normal plane.
I like your radio stack. Can you show pix of them without the mounting brackets on?
What knobs did you use
פשוט צנוע ולעינין ........ well done
Amazing job! I wish you would do a deep dive into the steps required. Honestly, with those plans you should be able to produce those and sell them. If you can make this (without TVs, iPads, Computer, yoke, rudder) for under $1000 and still make money, you should.
Absolutely, good job! Your work here is inspiring, and I would like to know roughly the dimensions, measurements of your panel, as I am in the process of putting together a sim for myself! Thanks for sharing!
What kind of tv do yuo have? are you using one computer for each screen? which nvidia are yuo using?
It's a real nice simulator !!! Congratulations from Belgium ! Have a nice flies !
thank you for waching my video
wow what a beauty very well done, a query of how many fleas are your screens and if you could share your configuration please
@@musica-fx9un HY I Use 3 screen 55" 4k and Anther one 22" for my Flight guides. My Pc Working Great With I9 gen 10 - 2080 TI Graphics Card. 32 GB RAM. WIN 10
Yes, great video. Can you share how you wired the knobs and other controls, and how you connected them to communicate with the MSFS 2020? Many of us want to learn and try.
Hi Captain Bob your invention and gauges are awesome as well 😇👍
very cool setup
How did you do the steam gauge instruments, mainly interested in the fuel, oil pressure and VOR?
hy.
I Use air nanger
www.siminnovations.com/
Hey! I really like your setup! Is this yoke from saitek? Is it good?
ruclips.net/video/58A_zKKup0E/видео.html&lc=Ugz8t1z_Zi6dnmmSvC94AaABAg
It wasn't good, so I replaced it
Wow really nice job ! Are those monitors at 90 degrees , looks like a great image
Great setup and video, where can I purchase one of those instrument panels?
Can be purchased on Amazon
www.amazon.com/-/he/Logitech-Flight-%D7%9E%D7%A7%D7%A6%D7%95%D7%A2%D7%99%D7%AA-Throttle-Quadrant/dp/B07QXMTNPB/ref=sr_1_2?crid=3N7OJCBIDZ3SO&dchild=1&keywords=flight+simulator+controls&qid=1625944803&sprefix=flight+%2Caps%2C293&sr=8-2
www.amazon.com/-/he/Logitech-Pro-Flight-Multi-Panel/dp/B01LWRNBI0/ref=sr_1_6?crid=3N7OJCBIDZ3SO&dchild=1&keywords=flight+simulator+controls&qid=1625944855&sprefix=flight+%2Caps%2C293&sr=8-6
Very nice. Would love to know where you got some of the items, ie the trim wheel.
hi how did you set up the 3 screens to work as 1 i have the same but i am having difficulties running them as 1 screen thnx
Hi are you using the sim coder rep cessna ??
no
thw sim is FS 2020
How did you make the intruments?
Amazing build! Thanks for sharing.
Thank you
A really awesome video, If its possible could you tell me the software you used for the instruments and is it a display or each separate instruments?
HY, Thank you
i used in AIR MANGER
www.siminnovations.com/buy/product/65-air-manager-4-home-use
Excellent set up..I notice you have your seat mounted on wood..is it an old car seat?..What size wood did you use as I am thinking of doing the same..
Hi m8, is it possible to share the dimensions of the panel, cutouts etc. Thanks 👍
hy
flyingforfun.weebly.com/cessna-172-cockpit.html
loving this setup!
This is so cool!
Nice job !!
Hi, are u using MFS2020 and Air Manager, thanks
yes
thank you for waching my video
אלוף האלופים
Are you able to upload your panel diagrams, I'm interested in building this.
Awesome!
frikin AWESOME setup man
Hello. Is this Xplane 11 or MSFS 2020 ?
HY - This is MSFS 2020
Here at looking pit but that yoke is not great. Check out honeycomb at the least, redline at best
You're right. The Logitech was replaced a long time ago
Cool. How big are the screens and would you think bigger would have been better. Your reply will help me with my GA new project. Thanks in advance
hy. my screen is 55". it's well.
Absolutely incredible! If I may ask... What Make, Model and Size are those screens?
TANK YOU . 55" Haier
@@Shimon73 Thank you very much! Happy flying!
Nice u have the dimension for the panel?
good!!
genial, buenos vuelos!!
Thank you
What software are you using to get everything working correctly?
xplane 11 + spad
Nice.Good Job!!!!!
Where did you by everything? What cost?
hy. The simulator consists of a large number of parts from different companies that have been collected over the years. It's hard for me to give an precise price ,but i believe it, $ 10,000 only parts
Beautiful work. Have you started to use MSFS2020 yet?
yes. but one screen for now
Very nice
Thank you
Good evening, one day you can make a video explaining how to use the plane maker of x plane 11 to be able to configure the views of the three monitors as you have configured it since I see that it is necessary to learn and no matter how much I look I can not find a tutorial that I explained exactly how to achieve this type of views since the wings are seen on the screens and the nose in the main one, I also understood that the configurations vary according to the size of the monitor, the resolution, etc. (I hope one day I can make a tutorial explaining the step by step of how I achieve that configuration through plane maker thank you very much in advance)
It's not on plane maker it's under graphics
That is cool
I’ve had a, “wait, I could do this” moment
Tv size?
55"
Why go thru all this work and still use the wrong throttle for the plane?
You're right. I'm looking for a quality yoke that suitable for the panel
@@Shimon73 Honestly, that yoke is bad. You will be much better off with a better yoke. If you want to spend some money but get the best, check out brunner yokes.
Nice Sim! What are your sims dimensions?
xplan 11 + fs 2020
יפה מאוד ..
for the price of this you could buy a real cessna maybe used and from 2000 but its still good plane
If you could find me a Cessna for 8k $ I would be very happy🤣
Check out Ultra Clear Bezels
🥇👑
Really could have left the music off, man. I only need one screen so when I hit Minimums I either see the Runway Environment & Land or Go Missed. Really great simulator, Bro. Need more info on the build.
You should use honeycomb yoke instead of Logitech, otherwise epic simulator!
You're right. The Logitech was replaced a long time ago
PLEASE let me know if you can build one for me for around 5 thousand dollars.
Man I will be knocking you door for help
he didnt yell CLEAR PROP!!!!!
hhhhhhhh
Why would someone dislike this lol
Damn that music is annoying 😂 Cool sim though.
1) la musica di sottofondo è insopportabile
2) perché simuli "solo" un 172 se hai un simulatore di bimotore?
3) con tutti i soldi che hai speso, potevi comprarti un vero aereo e volare realmente
What is this a voiceless demo? Cancel!