1993-2011 Ford Ranger Window Regulator Replacement
HTML-код
- Опубликовано: 16 окт 2024
- Learn how to replace the window regulator on a 1993-2011 Ford Ranger. We'll show you how to make this repair yourself. Shop Here: amzn.to/3aCR7bh (affiliate link)
#fordranger #windowregulator #autorepair
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission based when products are purchased from them.
I'm listening to the cicadas in the background and I'm going the same job tomorrow on both sides no less, good job gentlemen.
Thank you for watching our auto repair video that shows you how to replace a window regulator in a Ford Ranger.
I like that you didn't take out the glass. Mine is having an issue where sometimes it'll work and roll down other times (usually at a bad time) it won't. I know its not the switch or the wiring because even when it doesn't roll down I can still here the auto down relay thingy clicking so its getting power, It has its good days and bad days so eventually I will need to replace it. Some say you need to remove the whole assembly including the bar that the glass slides up and down. I do not wanna drill out the rivets holding the glass because the way I see it one slip of the drill and I might need a new window so i'd like to avoid that if possible.
You may want to check the wire harness between the door and body of the car for a broken wire of frayed wire that might be causing the intermitted issue you are experiencing. This video will show you what to look for. ruclips.net/video/EcOWrgmMUFw/видео.html
Thanks for this video. There are several videos here showing this job, but with a working motor, which allow the window to positioned to remove the rivets. Mine is stuck in the up position as yours was.
Thank you for watching our auto repair video that shows you how to replace the window regulator on a Ford Ranger truck.
Damn, this dude is a pro!
Thank you for watching our auto repair video that shows you how to replace a window regulator in a Ford Ranger.
Good video! FYI - I believe when you installed the new regulator the coiled main spring was missing on the new part.
Thanks for watching!
These instructions are much better than some other videos. Do you know what rivets would be best? Quarter inch, but what length shank?
Also, your Amazon link is to a product that is "Currently Unavailable". I don't know if you can edit that now or not... or if it even matters.
We just used some rivets we had in the shop that fit.
Good video Simple to follow
Glad it helped
Methodically done. Nice job.
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
Thanks a lot. Just what I needed to know. 👍🏻
Glad it was helpful!
Do they just make the wearable teflon guide slide for these window regulators? Mine is worn out and the window goes up and down fine but wont seat properly at the top rear of the window so there is an aig gap unless i get the window mostly to the top and then push the glass to the back at the top and then crank it up.
I am not sure haven't lookin into replacing just the window regulator guides for this Ford Ranger window.
Great video! Just did this job today. You made it easy for me. Thanks!
Glad it helped!
Trying to replace the regulator in my '02 Ranger. I can't get it the new one into the track
It should go back together as shown in this video.
tanks guys ! very good step by step operation !
Thanks for watching
Good video. Now you can come and do mine.
Thanks for watching
I had the spring fall out on the window regulator and the regulator only go One Direction any suggestions
Is it new or old regulator
Thanks
Thank you for watching our auto repair video that shows you how to replace the window regulator on a Ford Ranger truck.
I think dorman makes all of the rivets and motors and regulators for all these vehicles for thos of you guys asking. Find them on amazon
Thank you for watching our auto repair video that shows you how to replace the window regulator on a Ford Ranger truck.
Great video! How long were the rivets?
Not sure on the exact length. They were not that long.
@@HomeOwnerRepair I like the fact that you used a rivet gun instead of nuts and bolts. I bought the rivet gun you recommended. It's a quality tool and easy to use.
you could have used hex bolts and nyloc nuts instead of rivetting again.
Thanks for watching! Don't forget to subscribe!
That's a vapor barrier, keeps the back of the panel dry.
Yes, You are correct.
The job would be simpler by buying the regulator with the motor atteched, that way you don't have to deal with the bracket
When ever possible yeah we typically will buy a brand new window regulator assembly with a new motor too.
American crap?
China/Mexico
You'd never need to do this on a Japanese vehicle!
Thanks for watching.