@@mrt8694 Neither will an angle grinder.🤣 My set of bolt cutters are only 8 inches long and fit in my jacket pocket. It cost around $100, but I've cut so many padlocks with it, it's paid for itself many times over.
Can you show how to open the round locks? I didn't go through your whole play list to see if it was there... if it's in your list, can you tell me the name and date of it, otherwise.... They have a short, area that the thick bar(don't know what it's actually called) that it slides into the lock that doesn't seem like it could be cut with bolt cutters.? I'd just like to know how safe my storage container is. 😂 Thanks 😊 I subbed because you're Awesome! 💯😁
On the second example the shim doesn't even penetrate the lock to release the bolt. Besides it would take two in order to work for that particular lock
@@jeremywalker666 There are way too many clickbait videos around unfortunately...I should make one already...how to loosen a wheel bolt with a piece of 2x4
I lived and went to school in an inner city "ghetto" school so it's easy with the combo locks it's just looking for resistance points and key locks are easy enough to pick with bobby pins 😂 so now glorious karma I'm looking for something for my gym locker since I don't want to really carry my phone around 😅
Das ist ja alles gut und schön... aber was mache ich mit einem geschlossenen Vorhängeschloss, dass an der Tür hängt und welches ich nicht in einen Schraubstock klemmen kann???? Auch das Brennmaterial der Zündhölzer kann ich da z.B. nicht reinfüllen. Das fällt ja gleich raus!!!
I have bolt-cutters which fit in a pocket, as it's only 8 inches long. I bought it primarily to cut padlocks. It cost me $90 but it's already paid for itself.
None of these actually work. The closest thing to actually workable is the jar lid shim. The problem with it is that jar lids are made of metal that is too thick to fit between the shackle and the hole it slides into. The metal that makes up the side of an aluminum soda can, however, is perfect. Any padlock that you don't have to have the key turned to lock is vulnerable. Some locks have latches that are squared off, not tapered, to prevent this vulnerability. Some locks also have a latch on both sides, requiring you to shim both sides. Funny thing is, if you look at the shackle on the lock used to demonstrate this technique, it was one of these locks with two latches requiring two shims and he's only using one.
Basically I got shown three ways and not four. Two of them were shims and I count the shim idea as one idea or one way to open the lock and even then the first lock that he did the shim idea on didn't even look like it would even fit into the housing along with not even looking like it went into the housing to do what it was supposed to do; and that lock combined with the lock at the end both had places on both sides of the shackle that had some type of catch on them which would mean he would need to have two shims not just the one, so I'm kind of wondering how he was able to get either of them open with one shim. On top of that, the thumbnail I clicked on showed a battery and the video itself didn't even show him using a battery to open a lock. My guess is that the implication being that he could have unwrapped the battery from the casing and possibly used it to make another shim thus going back to my original idea that the shim idea is just one way to open the lock
Jò jó ,de nem èletszerü..minden módszerhez kell egy satu....ès ha a lakattal be van zàrva valami ès az lóg nem tudod befogni a satuba foszfort beleszorni,stb.
Sometimes you have to have faith in our community and realize that criminals are going to do crime regardless, we shouldn't censor our help within our community based off fear from discretion. I try to think that most are good. Some good guys do bad shit, some good guys used to do bad shit and don't good guys who are mid transformation back to Good
Why bother with all the 'tricks' when such a crappy lock can be picked in second? A half decent lock can't be shimmed or opened with the gunpowder stunt anyway.
Попробуйте наш український замок открыть тогда я поверю!!!! А так китайские замки я с 1го удара молотка сбиваю и не мудрую что либо!!!!! хоть на коментах заработаеш😋
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Second and fourth - same method. 😕
And they’re faked too :(
I lost my lock keys and just watched your video, used one of your methods and it worked.thank you so much
How method you use? I want try this but i dont want break the padlock.
#1 and my personal favorite is at 0:05
Take the angle grinder (cordless) open any lock 10 seconds
Why waste 10 seconds when bolt-cutters can do it in one? They're quicker and much more quiet.
@@PhantomFilmAustralia fair point but the bolt cutters won’t fit in my pocket 😀
@@mrt8694 Neither will an angle grinder.🤣
My set of bolt cutters are only 8 inches long and fit in my jacket pocket. It cost around $100, but I've cut so many padlocks with it, it's paid for itself many times over.
@@PhantomFilmAustralia same size as my angle grinder then ,my bolt croppers are about three foot long 😂
@@PhantomFilmAustralia an 8 inch bolt cutter is for wires. What are you talking about? Just bolt cutters above 36 inch can cut a lock
Good afternoon! Very good👏👏👏greetings from Brazil🇧🇷🇧🇷🇧🇷
E engraçado só gosta do Brasil quem morra em outro país .
can you tell me what camera you are using?
Why do you ask? I know a lot about cameras.
Thank you for your knowledge is that lock is reusable after trying method number 1
Can you show how to open the round locks? I didn't go through your whole play list to see if it was there... if it's in your list, can you tell me the name and date of it, otherwise....
They have a short, area that the thick bar(don't know what it's actually called) that it slides into the lock that doesn't seem like it could be cut with bolt cutters.?
I'd just like to know how safe my storage container is. 😂
Thanks 😊
I subbed because you're Awesome! 💯😁
3:24 Oder man nimmt einfach den Winkelschleifer zum öffnen
Love it 👍❤️🏆
On the second example the shim doesn't even penetrate the lock to release the bolt. Besides it would take two in order to work for that particular lock
Same on the 4th
@@stimfalc have you seen a more generic skit?
@@jeremywalker666 There are way too many clickbait videos around unfortunately...I should make one already...how to loosen a wheel bolt with a piece of 2x4
I thought that too and watched again at 1/2 speed ~ You're 100% right 👍
Exelente Dios te bendiga ✨️🙏🙏🙏❤️
What if the lock is on something and you want to get it off? And/or you want to keep it after opening it in the ways you demonstrate?
Use a key or consult the lockpicking lawyer
Also the shim method is non destructive. But rely on the lock not being protected against shimming
Useful for thief;ha,ha,ha!
He showed at least TWO ways to avoid damage.
You pick it
Ok what about the result for round vathal kosa seven lever lock brass type open pl explain.
That's about $40 in lumber for those matches
Wow ,amazing
钥匙都丢了，还要这个锁干嘛呢？如果单一个锁，扔了算了，反正也没钥匙。如果锁在门或箱子上打不开，那也没法这么折腾啊？
What?! This is a game-changing hack. Definitely bookmarking this for future reference!
Pero ponlo en una puerta con cadena que no es lo mismo
this is a great idea unless your lock is attached to something.
Amazing
I lived and went to school in an inner city "ghetto" school so it's easy with the combo locks it's just looking for resistance points and key locks are easy enough to pick with bobby pins 😂 so now glorious karma I'm looking for something for my gym locker since I don't want to really carry my phone around 😅
Every thief will learn from your skill, hahaha🤣🤣🤣
That’s why I keep 5 pounds of match heads with me where ever I go
Im sure you love how it smell
😂
جب٥ظتظ😊@@mattwillis8769
جب٥ظتظ@@mattwillis8769
Kkkkkk
ขอยคุณ ครับ👍
Das ist ja alles gut und schön... aber was mache ich mit einem geschlossenen Vorhängeschloss, dass an der Tür hängt und welches ich nicht in einen Schraubstock klemmen kann???? Auch das Brennmaterial der Zündhölzer kann ich da z.B. nicht reinfüllen. Das fällt ja gleich raus!!!
The jar lid shim is the closest thing to anything that might work, but jar lids are too thick for most locks. A soda can works great, though.
Muito legal😂😂😂👏🏾👏🏾👏🏾👏🏾
Muy bueno 👌 muy bien tu truco 👍 saludos cordiales desde MZA ARG ✌️ 🇦🇷 👍
Wish I seen this a couple of days ago instead of buying bolt-cutters to cut off a lock where I didn't have the key
I have bolt-cutters which fit in a pocket, as it's only 8 inches long. I bought it primarily to cut padlocks. It cost me $90 but it's already paid for itself.
None of these actually work. The closest thing to actually workable is the jar lid shim. The problem with it is that jar lids are made of metal that is too thick to fit between the shackle and the hole it slides into. The metal that makes up the side of an aluminum soda can, however, is perfect. Any padlock that you don't have to have the key turned to lock is vulnerable. Some locks have latches that are squared off, not tapered, to prevent this vulnerability. Some locks also have a latch on both sides, requiring you to shim both sides. Funny thing is, if you look at the shackle on the lock used to demonstrate this technique, it was one of these locks with two latches requiring two shims and he's only using one.
@@kender1412 right? none of the methods, as shown, will work. The lock picking lawyer this guy is not!
@@25EllisDee25Who is the lock picking lawyer ?
stop exaggerating, everyone knows it’s 5”
Я понял что главный инструмент для вскрытия замков, это стол с тисками. Теперь буду носить с собой всегда!
👍good
Basically I got shown three ways and not four. Two of them were shims and I count the shim idea as one idea or one way to open the lock and even then the first lock that he did the shim idea on didn't even look like it would even fit into the housing along with not even looking like it went into the housing to do what it was supposed to do; and that lock combined with the lock at the end both had places on both sides of the shackle that had some type of catch on them which would mean he would need to have two shims not just the one, so I'm kind of wondering how he was able to get either of them open with one shim. On top of that, the thumbnail I clicked on showed a battery and the video itself didn't even show him using a battery to open a lock. My guess is that the implication being that he could have unwrapped the battery from the casing and possibly used it to make another shim thus going back to my original idea that the shim idea is just one way to open the lock
What about a combination or tube lock?
Super
Where is the one that shows using the battery
Los métodos están buenos, pero ninguno serviría en una situación normal.
おもろい😁
Bravo ! C'est génial !!!
A0.
Ta tiktok
Слышал о таком *лайфхаке* как фомка? Вот как раз для подобных замков , и *канючить* по часу ненужно - 10 сек и все готово. Лайфхакер мамкин!
If you have a grinder be easier to just grind the lock than fabricate stuff
My exact sentiments... lol
rozumies slovensky lebo ja anglicky nie ale jak ano je to super hlavne s tou spinkou
Awesome video 🩷🩷
Esses métodos devem ser testados em locais reais onde o cadeado é de fato usado.
You have an angle grinder and a blow torch, but you don’t have a lock pick 💀
오래전에 다른 영상에서 한번 보긴 했는데
또 봐도 신기
Useful for thieves?
The thieves thank you a lot
Глупости все это, а если замок на сарае и в снегу или под дождем?
How to get into your neighbors house is a more accurate title
Другой раз попробуй открыть также настоящий замок например амбарный
Why dont you use the flex to open the lock 🙈
Now I have to play. 😁
Hi, wow
I'll just go to a locksmith and have him make a new key.
Con una martellata faccio prima ma comunque bei metodi 👍
The pin motion didn't work for me 😢
Moi non plus!
🤣🤣🤣
Est-ce que le trois tient ?
Ну открыл,а сколько портов?
Show de bola
Dzięki😁
Jò jó ,de nem èletszerü..minden módszerhez kell egy satu....ès ha a lakattal be van zàrva valami ès az lóg nem tudod befogni a satuba foszfort beleszorni,stb.
قدیمی شده🔓🔒
In my opinion, the best way to open a lock is simply with a key.
Or just use the angle grinder on the actually padlock
4:54
a video editing magician, in reality, you can't open it in such ways
Yes u can.I did two ways and it worked.
Lass das mal den Schimanski machen.
Good idea for thieves
Tim scraps??? It may work depending also where's the padlock on the lock..is not that easy..dude
この動画を見た人が、他人の家に忍び込む際に悪用すると犯罪者になってしまいます。治安が悪くなる昨今、あまり関心できませんでした。
4 cách mở ổ khóa của bạn rất hay
번호키 여는 방법은요?
Yes but if your door is locked •••••
Акопян видеомонтажа 😂👍
K. Legal. Os. Mano. V. Faz. Igual.
えーーーー😱
こんなにちょろいの？南京錠って。
👍
Open top security
Am que es idea muy interesante
Это давно известно, за счёт серного газа создаёт давление на шарики.
Pressure on the balls is very hard to withstand
Надо было сразу амонал забить в замок.а не серу
電気カッターで鍵切れや！
Is. Biriful. Broders. Cany. Mak. Is.
Ga berlaku untuk gembok kunci kotak
3:34 good tips for life
хонор проверял замок спичками: не работат
Монтаж? Нет, спасибо...
what's small hole saying on there! 😉
Мастер монтажа ахаха
Red phosphorus
Hence, Proved professional Thief 🙂
Sometimes you have to have faith in our community and realize that criminals are going to do crime regardless, we shouldn't censor our help within our community based off fear from discretion.
I try to think that most are good.
Some good guys do bad shit, some good guys used to do bad shit and don't good guys who are mid transformation back to Good
Mostly all men are Good*
電池は❓(ФωФ)❓
Способ со спичками - полная хрень, не работает, я пробовал
ایبل
CALL A LOCKSMITH ! ! !
These tricks really work
Puras tarugadas
Já era o cadiado kk o preço q...ta
Why bother with all the 'tricks' when such a crappy lock can be picked in second? A half decent lock can't be shimmed or opened with the gunpowder stunt anyway.
Попробуйте наш український замок открыть тогда я поверю!!!! А так китайские замки я с 1го удара молотка сбиваю и не мудрую что либо!!!!! хоть на коментах заработаеш😋
En una situación real no me sirve...