My husband was going to try replacing the light bulb BUT after watching your video we are just going to take it to the dealer… lol… that’s way too much work just to replace the darn light bulb. And thanks for your help. 🙏🙌
Ok, my bottom two bolts on each headlights were almost impossible to remove. The stupid lock nut kept moving. Even when I used vise gripes, the stupid bolt kept moving. After lots of elbow grease was able to get three off but the fourth one even broke my vise grip. So I cut the stupid screw off. When I installed the new headlight assembly, I got rid of that stupid bolt setup and went back to the simple bolt and nut.
Very helpful video! My left parking light malfunction, can I replace just the light bulb or have to replace the module? can’t find any video about how to replace the XENON Parking light specifically. Thank you.
you can replace just the xenon bulb. I advise you to buy and replace both (left side and right side). and pay attention to the color of the lamp (3000k yellower light, 6000k whiter light). watch this video ruclips.net/video/BWduI7cQAkA/видео.htmlsi=xoHGhO49mNcKAJbh
Thank you so much for the speedy reply, Fernando! I thought the parking light is a separate light bulb from the one u changed in that video. So it’s basically the same bulb? Thank you for making such informative and helpful videos!
you have to remove the headlight carefully to avoid scratches. I had no scratches even though it looks like in the video. But you are right, you have to remove the headlight carefully
Mine came out great only issue I have a slightly larger gap between the bumper and the front of the hood on the right side. In that corner where the pointy edge of the bumper meets the front of the hood. Any suggestions? Thanks
You can use a washer on the screw that holds the bumper on the headlight on the top, basically where the edge is. I wouldn't touch factory installed screws that are aligned to make headlights fit.
Im having problems with the first two screws that are underneath the headlight. Mine didnt come out by just unscrewing them. Mine have some nuts and they spin with the screw, help?
When i put mine back I have a hard time positioning it correctly with the fender and bumper angle. I cant seem to get it right theres always gap. What can I do ?
need help i checked all fuses nothing wrong but still the left headlight dosenot work . I am wandering where is the relay maybe the problem is from relay? The car is bmw series 3 2015 X Drive awd
Oh okay. I think the LED module is working because the light under the angel eye is turned on but it is dim. That side of the car was involved in a collision which might have pushed the module inwards. What do you think?
The Daytime lights does not working on right side, also warning on dashboard for DayTime headlights. I suspect the led modules and driver module. I know The driver module can replace easily from wheel side. How about led modules, is it needs remove bumper or headlight fully? Thank u so much
@@fernandomontenegroBMW Hey man, nice video. My angel eye LED closest to the grill on the passenger side is out. Can that replaced without removing the whole set-up? It looks like you might be able to access the screws without taking the entire headlight out. Thoughts?
"German engineering"....what a joke...They could learn a lot from the Japanese or even American car companies. The most convoluted assembly and design process ever devised by man.
@@fernandomontenegroBMW Of course. And you certainly look like you know what you're doing. I replaced assemblies on almost every brand, except BMW and VW, the two most difficult ones. Even Volvo makes it as easy as a plastic tab and 1 screw or bolt. That job you did is the most complicated I have ever seen. I won't be doing it myself. Great video! Cheers!
My passenger side headlight assembly has a large gap where it butts up against the outer edge of kidney grill. Would I have to loosen all 6 screws that hold assembly in place to do this? ( basically push headlight assembly over towards center of car )
Worse car to do anything with headlights, u figure they woulda made the next gen after e90 easier to get to to remove headlight but still need to remove bumper 🤦🏻♂️
must give BIG LIKE to you for being so patiently and clearly showing every steps yet holding 1 hand camera. TQVM! ⭐⭐⭐⭐⭐
Thanks for your comment. I'am glad to help you
My husband was going to try replacing the light bulb BUT after watching your video we are just going to take it to the dealer… lol… that’s way too much work just to replace the darn light bulb. And thanks for your help. 🙏🙌
is truth. sometimes we think it's simple like other cars. i am glad to help you. thanks for your comment
To replace the bulb you I screw the round cap on top of the light to change the bulb. This is for removing the entire fixture
if ur only changing the bulb u dont have to take the whole headlight assembly off lol.
This is NOT a bulb replacement video! It's a Headlight unit replacement - the bulb swap is required because they didn't come with the unit.
Exactly what I needed. Thank you!!!!!!! Made the job so easy, god bless
Thanks for your comment. I'm glad to help you
Ok, my bottom two bolts on each headlights were almost impossible to remove. The stupid lock nut kept moving. Even when I used vise gripes, the stupid bolt kept moving. After lots of elbow grease was able to get three off but the fourth one even broke my vise grip. So I cut the stupid screw off. When I installed the new headlight assembly, I got rid of that stupid bolt setup and went back to the simple bolt and nut.
good work michael. sometimes the work gets complicated but there's always a way to solve it
Bro pls help me im in The Same situation pls help me, i cant remove i spent 5 hours trying to remove but nothing
Je suis actuellement à bricoler j’ai exactement le même problème sur les vis du bas impossible à enlever
How can a bolt be stupid?
Excellent silent job with nice music
Thanks for your comment
Dziękuję Ci panie za te filmik!!!
nie ma za co
Great video, very informative gonna try and get headlights off my sons 3 series m sport
Thanks for your comment. I'm glad to help you
You did it the hard way
I love the Minecraft music thanks man
When purchasing a new oem housing headlights do they already come with light bulbs
No, the bulbs are purchased separately😬
Very helpful video! My left parking light malfunction, can I replace just the light bulb or have to replace the module? can’t find any video about how to replace the XENON Parking light specifically. Thank you.
you can replace just the xenon bulb. I advise you to buy and replace both (left side and right side). and pay attention to the color of the lamp (3000k yellower light, 6000k whiter light).
watch this video
ruclips.net/video/BWduI7cQAkA/видео.htmlsi=xoHGhO49mNcKAJbh
Thank you so much for the speedy reply, Fernando!
I thought the parking light is a separate light bulb from the one u changed in that video. So it’s basically the same bulb? Thank you for making such informative and helpful videos!
@@qqtv3706 just replace the led module at minute 12:14 of this video and you need to remove the complete optics
Thanks for the video🙏🙏
Thanks for your comment. Enjoy
Just what i needed thanks for the video
Thanks for your comment. I am glad to help you. 👍
Excellent clip bro....
Thanks for your comment.
good biceps man
Thanks for your comment
You are the best and yours videos as well.....thank you mate again
thanks
Thank you Master
Thanks for your comment
good video. much needed.
Thanks for your comment
I like so much your videos. Keep going
Before 9:23 after 10:02 that's why you always remove the bumper in order to take out the headlight, now you have fat scraches on the headlight
you have to remove the headlight carefully to avoid scratches. I had no scratches even though it looks like in the video. But you are right, you have to remove the headlight carefully
@@fernandomontenegroBMW 9:36 play the video in slow motion. Scratches appeared as you are wiggle the headlight out.
@@nsflarna oh man just saw that. RIP
Thank for sharing
Thanks for your comment
So how long about to take it out and put it back in? An hour? Can you take out without removing wheel? Just turning wheel sharply?
if you don't remove the wheel, you won't have room to work. I recommend removing the wheel. it can take between 30 minutes to an hour
Can you change the led module without removing headlight?
You will hardly be able to do it without removing the headlight
Best Video!!! Thanks for sharing👍
Mine came out great only issue I have a slightly larger gap between the bumper and the front of the hood on the right side. In that corner where the pointy edge of the bumper meets the front of the hood. Any suggestions? Thanks
to center the headlight use the screws that are in the video 13:08 and 13:20
@@fernandomontenegroBMW ok I'll give that a try. Thanks!
You can use a washer on the screw that holds the bumper on the headlight on the top, basically where the edge is. I wouldn't touch factory installed screws that are aligned to make headlights fit.
Great video, thanks mate 👍🏻
Minecraft music makes it best \
Im having problems with the first two screws that are underneath the headlight. Mine didnt come out by just unscrewing them. Mine have some nuts and they spin with the screw, help?
Is diferent that mine but watch this video ruclips.net/video/g9qPpkN6zkc/видео.html.
ขอบคุณมากครับ😊😊😊😊
ขอบคุณสำหรับความคิดเห็นของคุณ
What size torque set will I need? Trying to change mine and I need to pick it up
for you to work on your car, you need a good torque box. size 6 to 17
When i put mine back I have a hard time positioning it correctly with the fender and bumper angle. I cant seem to get it right theres always gap. What can I do ?
the (8:20) part helps center the headlamp
@@fernandomontenegroBMW not for me.
@@arthurjames9450 you tightened all screws correctly
@@fernandomontenegroBMW yes but its not alliging
need help i checked all fuses nothing wrong but still the left headlight dosenot work . I am wandering where is the relay maybe the problem is from relay? The car is bmw series 3 2015 X Drive awd
have you checked the plug connection to the lamp?
Geez just take the bumper off. All the flexing
May i know battery need to be disconnected before removing headlight?
for you to replace the headlight, it is not necessary to disconnect the battery.
Bolt keeps twisting on the back
I need help! Can anyone tell me the part number of the led bulb for the daytime running light of this car model. Been searching for a week!
63 11 7 428 425
I cant remove The two bottom bolts, can some one help me? I spent all day from The morning to The night but nothing, i cant remove it
are you using the correct key? try putting lube spray
Where can I buy flashing lamp
all car parts stores or online stores. In europe existe "autococ.com"
Another great video, many thanks.
Thanks man
My bmw 4 series right angel eye is not working but the other angel eye is working. What do I need to replace? Thanks
You need change the led module "12:10"
Oh okay. I think the LED module is working because the light under the angel eye is turned on but it is dim. That side of the car was involved in a collision which might have pushed the module inwards. What do you think?
@@wafasamazinggroup if you suffered a collision you may be out of place
Oh okay thank you! So are you saying that I have to take the headlight out completely and the LED module in place?
@@wafasamazinggroup remove the headlight and check that it is not damaged. also check the led modules
Where can I buy the xenon headlights thanks
In the autodoc online Store for example
Are the headlights OEM or aftermarket and if they're aftermarket can you send me a link to them?
Are the headlights OEM
@@fernandomontenegroBMW what year?
@@AfroCycle 2013
@@fernandomontenegroBMW is there a link to them?
Check this site pt.bmwfans.info/parts-catalog
I’ve just done this to my 3 series and the dipped beam points at the floor :/
you didn't tighten the headlight well or you have the bulb loose
@@fernandomontenegroBMWdo you mean the whole headlight unit isn’t tightened properly or the light within the unit?
@@bena1352 yes, it could be 3 things: the bulb inside the headlight comes off; the headlight is not tight enough; the poorly fitted headlamp
@@fernandomontenegroBMW have not got a clue what it is bulbs are in probably lights are in tightly having them adjusted in a few days so I’ll see soon
The Daytime lights does not working on right side, also warning on dashboard for DayTime headlights. I suspect the led modules and driver module. I know The driver module can replace easily from wheel side. How about led modules, is it needs remove bumper or headlight fully?
Thank u so much
you have to lighten the bumper and completely remove the headlight
@@fernandomontenegroBMW Hey man, nice video. My angel eye LED closest to the grill on the passenger side is out. Can that replaced without removing the whole set-up? It looks like you might be able to access the screws without taking the entire headlight out. Thoughts?
@@colehiniker you only need to change the led module. see minute 12:27.
Part number 63117398766
Can the Led module be replaced?
Yes you can
@@fernandomontenegroBMW can you make a video on it there none on the web
@@rah-rah2989 check the 12:10 in the video
where is the high beam part?
Watch this video
ruclips.net/video/BWduI7cQAkA/видео.html
Helpful video, but the music is pretty creepy.
RUclips playlist. Thanks for your comment.
Good video.
Gracias!
really f'n annoying!
"German engineering"....what a joke...They could learn a lot from the Japanese or even American car companies. The most convoluted assembly and design process ever devised by man.
new car designers have these difficulties, but nothing that can't be done.
@@fernandomontenegroBMW Of course. And you certainly look like you know what you're doing. I replaced assemblies on almost every brand, except BMW and VW, the two most difficult ones. Even Volvo makes it as easy as a plastic tab and 1 screw or bolt. That job you did is the most complicated I have ever seen. I won't be doing it myself. Great video! Cheers!
@@stevebrown162 thanks for your comment. Cheers 👍
nice video
So much work for a headlight removal... I have removed a few times the headlights of my BMW e39 and it's so easy compared to this...
Yes my friend, different models, different work
My passenger side headlight assembly has a large gap where it butts up against the outer edge of kidney grill. Would I have to loosen all 6 screws that hold assembly in place to do this? ( basically push headlight assembly over towards center of car )
Danke Fernando! 👍
Bitte schön
awesome
Eerie ass minecraft music, but thanks!
Thanks for your comment
how to replace led position lamp？“circle lamp ” bmw f34 or f31
You have a switch in the top of headlight
T6g
Worse car to do anything with headlights, u figure they woulda made the next gen after e90 easier to get to to remove headlight but still need to remove bumper 🤦🏻♂️
I think the following models are being worse. even to change a simple light bulb. thanks for your comment.
Come do mine. SC, USA. Lol.
why not? next week i'm going to california 🤣😂
BMW headlights are so overpriced! Those bulbs are not worth the price it cost to replace them.
These are high-intensity LED lamps. the quality pays.
This video skips the hardest part
Really? What is this part?
It’s all there I jus missed it the first time sorry
@@kevinmelendez5136 no problem. Thanks for your comment
All this for a bulb change.....
No, for headlight replacement
Terrible music
yes it's true, it's the youtube playlist. But if you want good music, go to spotify. This channel is to help repair cars
Boa tarde. Podemos falar via messenger? Obrigado.
Sim podemos
Procure em Fernando Montenegro