My Cleverspa Hot Tub Will Not heat Up

Are you struggling to find why your cleverspa hot tub refuses to heat up the water? even though you have replaced the heating element?
Here is a video to explain the reason why. and a link below to order the replacement water pressure sensor for your cleverspa inflatable hot tub.
www.layzrepair...
#cleverspa #heating #repair #layzrepair

[@layzrepair]

Cleverspa replacement parts www.layzrepair.co.uk/cleverspa-replacement-parts/

[@TheCorrie03]

Thanks so much the temperature probe was not working. Cleaned our the filters etc. Problem solved Thanks so much

[@markstevenmark]

If I blow into the pressure switch and test for continuity at the same time I have continuity.

[@RobertSaunderson-o5w]

Hi, I am getting intermittent heating, never gets up to temp. Have replaced flow switch still same problem. Any ideas? I Have ordered new element. Could the thermal cut off cause this? If so do you know if they are normally open or normally closed type? Thanks

[@markstevenmark]

Hi thanks for the video. I have a clever spar that not heating up I have tried a continuity test on the element and it seems ok, I have removed the water pressure switch and blown into it and I can hear a clicking.Have you any idea what I can try next? Thanks Mark

[@markstevenmark]

Also no error codes.

[@andrewmoore6367]

Hi there I have replaced my heater sensor last summer and worked fine , my HL code has shown up again this year I replaced sensor again but HL code still on any ideas what to do now

[@Craig7689]

Hi I can't turn off the freezeguard and all other buttons not working on control panel any idea of problem thanks ???

[@layzrepair]

replace the control panel. i have some new in stock, email me [e-mail]

[@rc0leroy]

I have this problem 😢 did you manage to solve it

[@rc0leroy]

Mine runs for 10 minutes then freeze guard kicks in then jets and heater turns off

[@Craig7689]

Update I changed control panel freezeguard light is now off but temp goes up randomly and heater won't work throws up hl error code I think I am going to change impellor next.

[@layzrepair]

@@Craig7689 if water if lowing then the impeller is ok. if the water is not flowing then look into the impeller. if the temperature keeps rising? this could be a faulty control panel.

[@andrewmoore6367]

Think I need a part to fix this now I havnt replaced the heater element would it be it

[@layzrepair]

if the machine is not heating? it could be the heater or the water pressure switch. i sell both on the website www.lawww.layzrepair.co.uk/cleverspa-replacement-parts/

[@RobertSaunderson-o5w]

Hi, I am getting intermittent heating, never gets up to temp. Have replaced flow switch still same problem. Any ideas? I Have ordered new element. Could the thermal cut off cause this? If so do you know if they are normally open or normally closed type? Thanks

[@layzrepair]

can i have your order number for the element? [e-mail]