I couldn't use the original jack because it couldn't work in horizontal position and wait for the part 2 guys to see the main purpose of that hydraulic jack
the rush is needed when fucking someone else's wife and catching crabs,and the Jack turned out cool I have a hydraulic rod is a tractor two-pin and the pump can not pick up
Yes, it's a cool and innovative bender but I could easily make every one of those bends with an acetylene/Oxygen torch and a vise. I have no idea why you went to the trouble to make that very cool looking bender machine but I give you props for the cool tool.
I love how he isnt using high end super expensive tools/equipment to make this as well ... truly talented people are going away and every generation seems to have less and less people who want to learn or work in a trade and we need our tradesmen (or trades people I guess I should say) because when they are all gone who will be able to teach or hell even do these things themselves??? support our children who have an interest in the trades..... I love that I was able to make a good living without having to go into debt for college not that college is bad but why start out in your very beginning of your life with a massive debt hanging over your head if you don't have to right?? just thoughts from a GEN X who never fits in anymore lol
Спасибо большое за работу! Ручки с правильного места растут 100 '/, ... И мысли в правильном направлении движутся ... (Respekt from Motomehanik)! Helo from UKRAINE(KIEV)! Good luck ! 😎😉☺️😎
Why did you drastically change the jack? There were enough minor changes (adding an oil reservoir and some small springs + return springs) ... Not all work was needed and the same result was reached. Anyway, a real achievement!
Very good friend idea but you lacked safety shoes, gloves and I do not know if I saw you put on protective glasses for your eyes. Take care of your physical integrity either at work and in your life as well. Greetings from Chile.
I get the idea. But using the jack unaltered, maybe? Yet, your thinking ahead of those who make nothing.good job. What size shoe do you wear? I want to send you steel toe shoes. Just to be safer. I really enjoy your projects
Пацаны накидайте лайков, пусть босурмане думают что я что-то умное написал. А вообще чувак молодец, только заменил бы трубки от насоса на гибкие, и считай полноценная гидравлика.
No muestras cómo va a regresar hacia atrás el pistón del cilindro quiero saber porque tengo una gata de dos entradas pero el cilindro de una entrada y no regresa a su inicio
Не... ну если б этот гидроцилиндр был пневматический или электрический, то я бы понял. А так нифига не понятно для чего пилить домкрат и колхозить пластиковый бак под масло, который рано или поздно разобьётся и уделает весь гараж.
I couldn't use the original jack because it couldn't work in horizontal position and wait for the part 2 guys to see the main purpose of that hydraulic jack
the rush is needed when fucking someone else's wife and catching crabs,and the Jack turned out cool I have a hydraulic rod is a tractor two-pin and the pump can not pick up
Yes, it's a cool and innovative bender but I could easily make every one of those bends with an acetylene/Oxygen torch and a vise. I have no idea why you went to the trouble to make that very cool looking bender machine but I give you props for the cool tool.
SANJAYJOSHI
@@johnknoefler good day bro check the part two of this bender
I wasted 16 min of my lif to see you make a hydrolic jack from a hydrolic jack 🤦♀️🤦♀️🤦♀️
Homemade Roller,Metal and Pipe Bender (Part 2)
ruclips.net/video/FsNUpCnuwUM/видео.html
Tremenda cátedra del sistema hidráulico gracias por compartir su conocimiento con todos nosotros bendiciones 😊
Você é um grande e autêntico inventor. Sem copiar. Obrigado .
Отрезная машинка без кожуха, всё как у нас. 👍
Привет из Русской Сибири, замечательное видео, у тебя неплохая материальная база.
Мечта .
I love how he isnt using high end super expensive tools/equipment to make this as well ... truly talented people are going away and every generation seems to have less and less people who want to learn or work in a trade and we need our tradesmen (or trades people I guess I should say) because when they are all gone who will be able to teach or hell even do these things themselves???
support our children who have an interest in the trades..... I love that I was able to make a good living without having to go into debt for college not that college is bad but why start out in your very beginning of your life with a massive debt hanging over your head if you don't have to right??
just thoughts from a GEN X who never fits in anymore lol
Спасибо большое за работу! Ручки с правильного места растут 100 '/, ... И мысли в правильном направлении движутся ... (Respekt from Motomehanik)! Helo from UKRAINE(KIEV)! Good luck ! 😎😉☺️😎
Очень всё классно сделал.С интересом посмотрел бы как ты переделываешь домкрат. Подписка! И лайк конечно же.
Mano, você é o bicho mesmo... Muito habilidoso e inteligente.
Great 👍work
Ang galing naman... Hanga ako sa inyong husay...
Молодец!что сделал из хлама!
Beleza parabéns projeto lindo
Why did you drastically change the jack? There were enough minor changes (adding an oil reservoir and some small springs + return springs) ... Not all work was needed and the same result was reached.
Anyway, a real achievement!
Awesome work dude. I appreciate all your RUclips shaw. Again unbelievable'
Very good
Excellent!!
Beautiful work!!!!
Where are you?
What country?
What is your day job?
What is your name?
Ayos yan bro ah galeng. Good job!
Salamat bro. :)
Ayos yan bro ah galeng .good day
Nice Safety flip-flop.
إبداع..... Good laek.. 🌷❤️❤️👍👍💞💞💞💞
Brilliant idea
Cool work 👍
Show de bola amigo
Very nice idea
Thank you bro
Absolutely the coolest way someone has asked for my sub by far. You got it.
1:15 there's always a chicken in the background of RUclips how to videos 😂😂😂🍗🍗🍗
Pure energy!!!!!
Mag collaboration kayo pre ni sek austria isang project gaya ng ginagawa ng iba. Isang malupit na project ganyan ka galing ang pinoy.
Great creativity and nice work!
Thank you bro
Parabéns amigo top de mais vc é muito inteligente 👍👍👍
Браво!!!
keep up the good work!
Thank bro
Very good friend idea but you lacked safety shoes, gloves and I do not know if I saw you put on protective glasses for your eyes.
Take care of your physical integrity either at work and in your life as well.
Greetings from Chile.
Thanks bro
Bravo omule ai mintea ca argintul viu , succes in continuare.
Nays
Good
Круто. Молодець
Идея хорошая.
I get the idea. But using the jack unaltered, maybe? Yet, your thinking ahead of those who make nothing.good job. What size shoe do you wear? I want to send you steel toe shoes. Just to be safer. I really enjoy your projects
Good job.
Ну самое глввное автор очень очень силе всё пальцами откручивает. :)
Cool
Parabens, Brasil te assiste....
Mantappp...
Thank you
Well done!!! Many people here in Europe forgot to use theirs mind, and prefererd paid for things ..... I'll prefer you way! ;)
Thanks bro
Отлично сделано, молодец !!!
Hello bro, I from malaysia can I know where is the place your workshop
Quanto vc cobra pra fazer uma ferramenta dessa
Buen video amigo, pero usa salvaguarda tus ojos corren peligro
Молодец , изобрёл колесо заново.
И зачем обратка нужна не понятно, в домкратах по одному каналу масло и туда и сюда. Хрень короче.
@@madmax5240 если вы не вкурсе это для стравливания масла при максимальном положение цилиндра , иначе цилиндр выскочит.
@@Leva_53 обычно пружина шарик, при сильном давлении работает на себя насос.
@@madmax5240 пересмотрите видео там нет обрати, там стоит штуцер для своей же безопасности ,он срабатывает при полном выходе , цилиндра.
Excelente 🇩🇴🇩🇴🇩🇴🌎
Ayos bro galing!
Salamat bro
Пацаны накидайте лайков, пусть босурмане думают что я что-то умное написал. А вообще чувак молодец, только заменил бы трубки от насоса на гибкие, и считай полноценная гидравлика.
great bro
Smart Fellow Awesome Idea
Thanks bro
Amazing bro great
Buen trabajo, eres un buen soldador, 👍
👍👍👍
Sendal adalah kunci...
I thought the thumb nail was some kind of cannon
надо было еще и лайк нарисовать , тогда как в терминаторе было бы, когда он в расплавленный металл погружался
Hi friend
I like your video and
Where are you from ?
Because I want it
Thanks bro.
Im from philippines
Thanks bro
I want it but I am from india
i have the same chinesse saftey boots ,,,,mine are black
Muy bien explicado,perfecto.
Thank you bro
Eres un genio q soldadura usas
Thank you
Mantap
Nice
only thing i would change is the cutting fluid ,,,,,, try oil works great ,,or kero
Buena idea .tengo un cilindro no sabia como base lo funcionar ya veo como hasrlo tenks four you ida
عمل ممتاز
Muito bom, parabéns👍
Thanks bro
Талантище держи палец в верх
👍😎👌
Don ako na amaze sa pag angat ng jack na may sulat na subscribe.
Pinahirapan mpa sarili mong mag hihinang... di tatagal yan...
Bakit bro?
Hindi pa naman yan ang orig. Na position nya bro babaguhin ko pa yan sa part 2 kung baga demonstration lang yan
Сколько весит конструкция??
Iove..u...Fc...สวยงามมาก...2019..
Show!
kamu kereatip
No muestras cómo va a regresar hacia atrás el pistón del cilindro quiero saber porque tengo una gata de dos entradas pero el cilindro de una entrada y no regresa a su inicio
MUITO bom !
I like how a ton of these videos have a bunch of welding and heavy equipment usage and they are always wearing sandals... 😂😂😂
We call them safety sandals.
OSHA approved
in nsw Australia we call them chinesse saftey boots
show de bola
Всё придумано хорошо, молодец👍👍👍👍, НО за технику безопасности твёрдая двойка. Побереги голову.🤕
Thank you bro
👍👍Saludos de mexico
Thanks bro
Lo que es basura para unos es grandes recursos para otros y soluciones para todos😃
Не... ну если б этот гидроцилиндр был пневматический или электрический, то я бы понял. А так нифига не понятно для чего пилить домкрат и колхозить пластиковый бак под масло, который рано или поздно разобьётся и уделает весь гараж.
hay qúa ban oi
legal 👏👍🇧🇷
I would love to build this i could make so much stuff for my ute
tỏi cung Phai làm 1 cái như của ban
The guy looks like Filipino
How to make new desing Dirt Bike
И нахрена столько заморочек?
масло какое-то чёрное, ты отработку с двигателя залил в гидробак что-ли?
Why just not lay down the jack
Угадай страну по видео )
comment bracher un moteur de machine a laver
Assalam