How To Make Homemade Lathe Machine Using Drill Machine | Diy Metal Lathe Machine | DIY

[@brumer333]

Que hermosa herramienta has construido 👏👏👏👏 te felicito gran trabajo voy a guardar este vídeo saludos desde Uruguay 🇺🇾🇺🇾🇺🇾🇺🇾

[@Goodluck-yo5vx]

Brilliant ideas and workmanship. That's what the world needs.

[@DiamleonDiyBuilds]

Thank you very much❤❤❤

[@sherwoodlayton9595]

This fellow is pretty handy with a grinder and welding machine. Nice project.

[@DiamleonDiyBuilds]

Thanks for watching!

[@КонстантинМотовилов-п3ш]

Отличное решение для домашней мастерской! Молодец!☺

[@HandmadeShow_with_Densss]

Отличное от чего? От любого более-менее нормально сделанного самопального станка? Каретки с километровыми люфтами и намертво заваренными гайками, без выборки люфтов? Всё на сварке, даже вал передней бабки. Судя по всему, на родине автора, подшипники никогда не выходят из строя и вообще, ничего никогда не ломается.. Жёсткость конструкции - вообще никакая. С таким патроном - зачем такая огромная странина? Что такое тонкое, но очень длинное собрался точиль автор?
Это "отличное решение" - самый лютый колхоз, из всего того, что мне доводилось видеть на ютубе. В случае поломки чего-либо, это можно прямо целиком нести на металоллом. Ну, или распилить, для изготовления других "отличных решений". С тем оборудованием, которое есть у автора, можно было сделать станок на несколько порядков лучше и точнее. Но автор даже не пытается заморачиваться.

[@DiamleonDiyBuilds]

Thank you very much❤❤

[@nguhamuinemuharukua8309]

Great sir now i overstands how lathes machines works ....greetings from Namibia 🇳🇦 🇳🇦

[@DiamleonDiyBuilds]

Thank you very much!🙏🙏🙏

[@Tricknologyinc]

DON'T WELD the END NUTS on the SCREWS! JUST USE A JAM NUT so YOU CAN ADJUST THE PLAY AS THEY WEAR!!!

[@DiamleonDiyBuilds]

Thanks for your suggestion

[@josephkipchumba7759]

my gosh i've fall in love with this very simple and nice project!!!!!

[@DiamleonDiyBuilds]

Thank you very much! I'm glad you liked it ❤

[@amertwiher2485]

بشكل عام ربما هذا افضل فيديو رأيته و شكرا لك على الوقت الذي أمضيته في صنع الفيديو ملاحظتي ينقصه الغراب

[@DiamleonDiyBuilds]

Thank you very much for you valuable comment ❤

[@michelsaucy4629]

Viens faire un tour dans le Jura, si tu veux t'instruire ! 😊

[@chongshenchang9367]

I think this is the only man I've seen operating Angle grinder without protective guard.
But his idea of building this lathe is genius. Nice work.

[@DiamleonDiyBuilds]

Thank you very much❤❤

[@nytsamlegt]

I have seen a few guys do that in the past when I was a mechanic. One eyed Joe was probably the worst, fast follower was cut-throat Tim. Sammy Scarface was also known for not using a guard. We had also Walter "WHAT", you could probably guess what he did not use. Coughing Carl and Bleeding fingers Fred were also couple of guys I knew.

[@leonk16.49]

Так же куртку себе прожог. Идея отличная как и исполнение.

[@sasab7584]

I know many people who do not use the shields. Personal preference. Usually people who have seen a low budget cut-off disc explode near them prefer the shield. I have driven a few who had not an experience with exploding disc, to ophtamologyst to remove metal shavins from eyes, but that process does not scare them enough to change habits.

[@Mr.ky89]

Very cool with the homemade mini lathe product from the drill, it works very effectively.

[@DiamleonDiyBuilds]

Thank you very much! I'm glad you like it! ❤

[@hmimichjari8465]

don't forget to secure the chain it's dangerous, frankly well done and good luck waiting for the rest😊

[@DiamleonDiyBuilds]

Thanks for your suggestion ❤👍👍

[@skifalu]

Wow - lots of respect for the workmanship. 👍👍

[@DiamleonDiyBuilds]

Thank you very much❤❤

[@VOLF-xn1sz]

Руки растут из правильного места !!! GOLD HEAD, GOLD HANDS !!!

[@DiamleonDiyBuilds]

Thank you very much ❤❤

[@diymaster101]

Amazing sir! respect from South Africa ❤

[@DiamleonDiyBuilds]

Thank you❤❤

[@newthinkofficial]

Please make a mini gear milling machine.

[@natanaelgomes1736]

Já deixei meu like no capricho

[@mikejackson6288]

Brilliant absolutely brilliant in every way. 🎉

[@DiamleonDiyBuilds]

Thank you❤❤

[@kmalnasef1512]

very very good precise work

[@DiamleonDiyBuilds]

Thank you very much! 😊

[@sudarshanabandara6444]

සුපිරි ටොප් සුභ පැතුම්...👍👍👍

[@DiamleonDiyBuilds]

Thanks man ❤❤❤

[@ΓιώργοςΜηλιωνης-σ2χ]

Πολύ καλή δουλειά!! Συγχαρητήρια φίλε!!!

[@DiamleonDiyBuilds]

Thank you very much❤❤❤

[@vinceianni4026]

Good job mister beautifully made good job well done

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@prasadvn524]

Beautiful project

[@DiamleonDiyBuilds]

Thanks very much!

[@johnbroadbent9034]

As a simple project lathe a very good Idea but why did you not use a proper lathe chuck they are very cheap

[@DiamleonDiyBuilds]

Thank you. Yes we can also use a lathe chuck.

[@prasadvn524]

Beautiful project.

[@emran9233]

Diamleon :- meri marzi me chahe ye karu me chahe wo karu meri marzi 😅😅

[@JBcabeleireiros]

Boa noite vc poderia me passar as medidas e os materiais por favor

[@KenielDakgop]

I enjoyed watching the full video .Very nice and creative.. person... well-done from png🇵🇬

[@DiamleonDiyBuilds]

Thanks so much! 🙏🙏🙏

[@CamilusPaina]

Great ! But I wonder if metal plates will cost more or less compared to a normal lathe machine?

[@DiamleonDiyBuilds]

Thank you. Very less

[@EbadollahPourbeyram]

Very good and simple thanks of yours ❤❤❤

[@DiamleonDiyBuilds]

You're welcome! I'm glad you liked it! 👍

[@KhairenAnhar]

Great job and the best👍💯

[@DiamleonDiyBuilds]

Thanks so much! ❤😃👍

[@user-tn1hk6zm2freedom]

You are very good.

[@DiamleonDiyBuilds]

Thank you! Cheers!

[@niemals_nicht]

i am impressed! you got my like!

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@davidcendeza2026]

This is a great video diamleon. Hats off

[@DiamleonDiyBuilds]

Thank you very much❤❤

[@noelpical2909]

very nice

[@DiamleonDiyBuilds]

Thanks

[@batanaikondo819]

Man good work but it would have been nice if you added the measurements and sizes of the steel

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@batanaikondo819]

I'm definately making one from this idea the Chanel iron what size is it as it seems like a 125mm

[@apauseco]

Good job , congratulations , greetings from Spain

[@DiamleonDiyBuilds]

Thank you very much!

[@AbolfazelKing]

Thank you very much for the tool you made, engineer

[@DiamleonDiyBuilds]

Thank you so much❤❤❤

[@DazFab_Metalworks]

Loved it👍

[@DiamleonDiyBuilds]

Thank you❤❤❤😃👍

[@ToktokPhone-u1l]

Wow bery good Boss thanks kyou

[@DiamleonDiyBuilds]

Thank you too

[@kcscott639]

I am planning one that should be similar.. will likely have a dedicated motor for it though as well as a larger actual lathe style chuck... i feel like that drill chuck limits you considering the accuracy and time you put into it. I suppose you could make an adapter to go from drill to lathe or make it interchangeable. My hold up is im collecting leftover iron from others projects. It used to be easy to get plenty but nobody builds any thing anymore and the ones who do don't want to get rid of anything. I just know i can build if rock bottom price if i can scavenge enough materials. I would primarily have to buy pillow bearings and the chuck, as well as some all thread. I really like the simplicity of your design though. Good job!

[@DiamleonDiyBuilds]

Thank you❤❤❤❤

[@BlueSkyThinking_247]

Using a basic lathe for a simple project is a great idea, but I’m curious why you didn’t opt for a proper lathe chuck, as they’re quite affordable.

[@DiamleonDiyBuilds]

Thank you❤❤

[@Gulshahxada]

Great work loved it keeps the spirits high 👍

[@DiamleonDiyBuilds]

Thank you very much!❤❤

[@Tiberiu-r9b]

Amazing and god thankiu

[@DiamleonDiyBuilds]

Thanks man

[@zorinho20]

Good work and props for using ppe.

[@DiamleonDiyBuilds]

Thank you! Cheers!

[@RichardIntig-pq7dw]

You are the best

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@JucimarPereira]

Muito bom!!!

[@hishampaqi6024]

you doing very very will.
the all hear love you.

[@DiamleonDiyBuilds]

Thank you very much❤❤❤

[@RanjitSingh-h8b]

Good work 👍

[@DiamleonDiyBuilds]

Thank you very much! ❤

[@nawirSizhalue]

❤❤❤ from Indonesian

[@DiamleonDiyBuilds]

❤❤❤

[@HariHaran-nk7ji]

Wonder buddy!!! Very Interesting... 🎉

[@DiamleonDiyBuilds]

Thanks buddy ❤👍

[@rudyermono77]

Nice ..👍👍thank's you👍👍

[@DiamleonDiyBuilds]

Thanks! 👍👍👍

[@غلامحسین-ت4ط]

کم نظیر و ساده و کارآمد .❤❤❤🎉🎉

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@emvukuritse2629]

Good work

[@DiamleonDiyBuilds]

Thank you very much! ❤

[@marcoamesty9486]

EXCELENTE 💯👍🤛🙏

[@DiamleonDiyBuilds]

Thank you so much! 💯👍🤛🙏

[@darylzorn7037]

Well done

[@DiamleonDiyBuilds]

Thank you❤❤

[@maxinehardy9411]

please make an ice cream machine next!!

[@naeemgurchani1059]

Vvvvvv.good brother

[@DiamleonDiyBuilds]

Thank you very much! 👍

[@AzisSyafii025]

Kreatif mas bro.... langsung auto subscribe

[@DiamleonDiyBuilds]

Thank you❤❤❤❤

[@cesarbatista8230]

Correct: Thank só much!

[@DiamleonDiyBuilds]

Thank you❤

[@ณัฐณิชาแพะทอง-ฎ6ร]

พิถีพิถันประดับบารมีใจไทยแลนด์ 🇹🇭😘😘😘

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@Theeunseenart]

Good 👍👍👍 work bro

[@DiamleonDiyBuilds]

Thank you very much ❤👍👍

[@robertliepe6766]

🤔Very impressive as well! 🥳🍻🍻👍🏻✌🏻🇺🇲

[@DiamleonDiyBuilds]

You're welcome! Cheers! 🎉🍻

[@alializadeh8195]

thanx

[@DiamleonDiyBuilds]

You're welcome! ❤

[@ВладимирМалёв-ц2э]

Все красиво, конечно, только в таком исполнении этот станок "одноразовый", т.е. для демонстрации возможностей.

[@عبدالرضابساره]

nice very good idea

[@DiamleonDiyBuilds]

Thanks! Cheers!

[@Hamid-az]

Very good.
I can see the screws moved when you work with your new lathe machine. How you fix that? I mean that it seems be not precsie. 😊

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@Hamid-az]

@@DiamleonDiyBuilds 👌❤️😊🇮🇷👏👏👏 your welcome 🙏

[@JIvan284]

gracias por compartir

[@DiamleonDiyBuilds]

Thank you! 🙏🙏🙏

[@francoisconjard5074]

Superbe réalisation d'un tour a métaux basique éventuellement rajouter une poupée mobile (pour percer)cdt

[@DiamleonDiyBuilds]

Ok thank you❤👍

[@satarupabose138]

Lathe machine banane ke liye bhi to lathe machine chahiye 😅😅

[@kaveirinhaz]

Nice work, but How did you insure the parallelism of the chuck to the lathe axis?

[@DiamleonDiyBuilds]

Thank you❤❤

[@CreiziCat-ht8cz]

Просто никто не собирался выставлять переднюю бабку. Для этого нужно было сделать крепление на болтах а не сваркой.

[@emran9233]

U have great mind

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@ideas_and_creative_01]

Good creative

[@DiamleonDiyBuilds]

Thank you very much❤❤❤

[@ЮрийТелегин-п1е]

Молодец! Голыми руками токарный станок сделал. Конструктор! А из какого швеллера и какая мощность дрели?

[@DiamleonDiyBuilds]

Thank you❤❤

[@Michjak91]

Super 👍

[@DiamleonDiyBuilds]

Thank you 👍

[@JoseGomes-or4zp]

MUITO BOMM

[@DiamleonDiyBuilds]

Thank you❤❤👍

[@tinlanthierry6650]

if I understood correctly we are limited to the diameter accepted by the drill chuck otherwise we must first machine a shank of the accepted diameter on a steel round of greater diameter, on a metal lathe.. too bad not to have fitted a real three or four jaw chuck

[@pereso8392]

Muito bom o seu projeto, você teria as medidas das peças, estou querendo fazer um igual ao seu projeto

[@rivaldoamaral526]

Muito bom 🎉like do brasil

[@DiamleonDiyBuilds]

Thanks❤❤❤❤❤❤❤❤❤

[@cetinoren7441]

👋👋👋👍 bravooo 👍👋

[@DiamleonDiyBuilds]

Thanks man 👍

[@ektorasx6285]

Εξαιρετικο

[@SalihSalih-i1y]

عمل جميل.. احسنت

[@DiamleonDiyBuilds]

Thank you very much ❤❤❤❤

[@caprico72]

Hola muy buen trabajo quisiera saber como se llama el disco verde que usas y donde lo comprastes gracias y suerte con tu proyecto es muy vesatil

[@emmanuelochieke1645]

On a budget lathe.

[@solacar]

Must be appreciated

[@DiamleonDiyBuilds]

Thank you very much❤❤

[@fabioregis7119]

Top demais parabéns..qual o tamanho que ele ficou

[@rainbow7x11]

Why don't you make a centrifugal extractor for sugar cane juice to remove the dust and debris from it using a creM separator for milk

[@michelsaucy4629]

Oui, d'accord, mais le mieux c'est de demander un tour chez TORNOS ou chez Schaübling dans le Jura , non ? 😅😅😅

[@andersonbicalhodesouza3588]

Que tipo de disco de corte você usar, ele é bem resistente !!!

[@FidunFittu-gl3hg]

Should have added 2 big spacers on both ends of the feeding shafts...Instead of that simple..."metal to metal"...Better durability and lesser friction...

[@hsdhillon-tv6xy]

Can be control by remote control

[@CerealKiller.]

How accurate it is?
- *yes*

[@dangmy1992]

❤sáng tạo tuyệt vời ❤

[@DiamleonDiyBuilds]

Thank you very much❤❤

[@lodericoparadela2004]

😢

[@محمدرضاسلطانی-ك5د]

درودبرشما

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@yolandocarreon7156]

God Bless You friend, brilliant of assembling mini or simple lathe machine. i'm filipino watching here in phillipines.

[@DiamleonDiyBuilds]

Thanks for watching! 🙏

[@MohTanha-ns2zf]

❤❤❤

[@DiamleonDiyBuilds]

Thank you❤❤❤

[@jose.fernandoramalhosilva1360]

Muito bom vc teria Q deixa as medidas

[@milutinmirovic]

👍😍

[@DiamleonDiyBuilds]

👍👍❤😃

[@jobbingactor]

Amazing how your gloves change like magic

[@DiamleonDiyBuilds]

❤❤❤

[@daviddiaz7778]

Para mí gusto deberías de adaptarle un Chuck de 4 pulgadas para poder t felicidadesornear piezas de 4 pulgadas

[@TadeuszTarka-so2dt]

A co z dokładnością, osiowość, równoległości, prostopadłość likwidacja luzów?

[@stuartrechter5175]

I really like this build, but I would make a few little changes. Instead of welding the drill mount to the frame, I would have made it attach via slots. Then you could use different sized sprockets on the drill to give you different spindle speeds. Sure, a variable speed drill will give you a range of speeds, but drills lose torque when the speed is electronically reduced, where gearing increases the maximum torque. I would also not have welded the chuck to the shaft, rather I would have welded a taper to the shaft, giving the flexibility of using different sized chucks, larger ones for say aluminium turning. I have been trying to get my head around making an X-Y slider to use with my mag drill for precision step-and-repeat drilling of holes in a precision grid. I am going to adopt your design for this. The purpose is so that I can make a fixture welding table top from 200 mm wide steel plates precisely aligned and mounted on a frame. Good work, you have many good ideas.

[@DiamleonDiyBuilds]

Thanks for your suggestion and your feedback!

[@marcosramirezpena5045]

Felicitaciones, un trabajo de 1er nivel excelente.👌👍👏👏👏🏅

[@DiamleonDiyBuilds]

Thank you very much! ❤❤

[@shabadshabad-vc2ct]

❤😮

[@DiamleonDiyBuilds]

❤👍