I used a windsheild wiper motor. A homemade petal for forward and reverce makes it fun to work. Thanks as always for an educational video. Gods blessings.
I think when u shared the secret of how to make groves or Bend than one must use their brain rather than asking for dimensions, thanks for sharing the trick or idea.❤️❤️❤️❤️ God bless
very educational and very easy to make this tool by this technique. many many thanks to guide through this video, it may be much beneficial to several persons concerned with this job. thankyou very much sir ❤❤❤
After over fifty three years as a Plater welder and most of that as a coded welder, I have to ask: Where the hell have these people learned to weld? Idea's are brilliant but the welding technique leaves me in shock!!
I see guys on RUclips weld with sandals, no gloves or wrong type of gloves, in shorts, and say, gee! They must have tuff skin or are impervious to burns.
You are using bearings for your forms, so why do you need the rods they are mounted on to rotate too....? And what purpose do the gears serve...? Why don't you weld the bearings solid and then put a turn handle on one of the shafts to control your piece rather than push it around manually...? A lot of this project seems pointless...
It's about control of part the idea you have does work if doing repetitive parts but if doing bespoke panels slowness is key ...your way is used for more rolling metal edges both have there own uses but technically do the same job 😂
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Thank you for your video. I've wanted a bead roller for some time but can't justify the $3 or 4 hundred dollars for something that will spend most of it's time on a shelf. If the round stock was sized correctly you could add bead roller dies later and buy the louver dies. I think I would add a crank to feed the work though.
I’ve thought about cutting a barbell in half - you find them at the tip or garage sales, good steel that wont bend & has raised part to stop weights from moving.
Okay, the metalwork was great, but first of all, to get any strength to thick metal you need to run continuous bead and crank up the welder. You have almost zero penetration, so the welds are prone to cracking. Second of all, why add any gears, when you can't use them? You should have welded the bearings stuck and added crank to the other side. So much unleashed potential in this project
I initially thought you were hating on this guy but it’s hard to argue with your observations and suggestions. You’re right about his welds. A crank would make it less likely to accidentally twist the metal while pushing it through the bearings. It would definitely make the process easier while adding a level of control. Nonetheless, I’m very impressed with his build. Thanks for sharing!
Perhaps those are for an eventual planned upgrade, though it has to be said that they either need to be keyed or shrink fit on the shafts to actually be feasible. That being said, I do need (and will probably make) this thing for clamp weld patch making for automotive sheet metal bodywork, and it is better than nothing, but of course it can and will be done better.
More popularly known as sheet groove maker, usually used in aluminium sheets (of up to 1mm thickness) for cladding pipelines of extreme temperatures. Great job there kwando. Should've made it a bit more awesome if you added a manual driving mechanism at the end of one of the shafts (where the gears are) for easy feeding in of your sheets instead of pushing them in hard, as well as adding up the U-shaped die (or bearing) aside from that L shaped one you got.
exactly. too hard to push. put a crank on the gear end. but it's not a bad idea, just... not many people have dog gears lying around the house) maybe you don't need them, or half of this tool. just a roller bearing, protruding from the bottom, and a cranked shaft at the top, with a welded bearing on the end. Roller bearing spins as you crank the welded bearing around. less work to build. less weight. no need for gears.
Amazing work, as always!! That final peace you make is beautiful!!! I think im gonna try to put one together. Thanks for you videos!!! Keep it coming!!!!
@@calysagora3615 It really is anoying you cant see the finished peace longer, but as he was about to finish It you cant see It. If you wanna see It more Just hit the pause. I did, It Works!!!!
I was wondering what the gears were for. I was assuming that you were using the outer race of the bearings for the bead profile and were going to weld the bearings solid. But I understand now, the gears are counterbalance.
Досмотрел до конца видео, так и не понял зачем самоделке шестеренки? Так как если крутить за валы, то заготовка будет оставаться на месте, за счёт того что подшипники будут проворачиваться.
You didn't weld the bearings solid so the crank and gearing does nothing. And you can see the shafts aren't turning at all, you just push the metal around.
The bearings are always going to spin. They are bearings haha. I guess it was future proofed so he could add other wheels one day? I don't know kinda weird
Está muy bueno su invento Socio, le FELICITO. Siga adelante, le tengo una pregunta. Este welder o soldador Usted lo fabricó, lo inventó. Funciona con soldadura de punto o es soldadura de arco?, Yo estoy suscrito a su canal.
Nice vedio. असेच चांगले व्हिडिओ बणवा धन्यवाद अभारी आहे 👌👍👌👍👌👍👌👍👋🤝👋🤝👋🙏🤝😮😮😮😯😯😯😯🤔😯
You are welcome!
good little project,
well in 30 years of welding I have neve seen a Jabbing Tig welder :)
Thank you!
OMG! Where has this been all my life? Much more precise than air shears or a body saw.
I used a windsheild wiper motor. A homemade petal for forward and reverce makes it fun to work. Thanks as always for an educational video. Gods blessings.
Nice ideas!
Hola
I think when u shared the secret of how to make groves or Bend than one must use their brain rather than asking for dimensions, thanks for sharing the trick or idea.❤️❤️❤️❤️
God bless
Thank you so much! Please see dimensions in video help me. Regards!
Jesus, you're precision in the last minute was incredible. Kudos to you, you sheet metal van Gogh
Haha, thank you so much!
very educational and very easy to make this tool by this technique. many many thanks to guide through this video, it may be much beneficial to several persons concerned with this job. thankyou very much sir ❤❤❤
I like it very much. Well done and nice tool. I am also quite impressed by the precision with how you use that tool at the end of the video.
Yes, thank you so much!
Wow super love and support from South India
Welcome and thank you!
Excelente tutorial y muy efectivo. Muchas gracias maestros
You are welcome!
Absolut TOP Work !!!! Thank you for showing 👍👍👍
Thank you!
This act should be continue so that technical will be motivated thank u
Thank you so much!
Оригинально и просто! 👍👋 Original and sample!
Thank you!
Уёбищно и не функционально.
Very very best job LOVE your style of work 👍👌👍
Thank you so much, bro!
may i help you
I don't download received.
After over fifty three years as a Plater welder and most of that as a coded welder, I have to ask: Where the hell have these people learned to weld? Idea's are brilliant but the welding technique leaves me in shock!!
Yes !! As a woman I was thinking that is the coolest welding tool I have ever seen. I think that I could even use it.
I see guys on RUclips weld with sandals, no gloves or wrong type of gloves, in shorts, and say, gee! They must have tuff skin or are impervious to burns.
It’s like they don’t know what a weld bead is…
Great job 👍 guys
Thanks!
Excellent!!!!!!!!!!!!!!
Thank you!
Kkuiii
L.l8ululLi.
Amazing brother...👍👍
Thanks!
Nice job Sir
Many thanks!
Nice idea 👍👍👍
Thanks!
Молодец уважаю людей которые своими руками делают полезные приспособления👌😊
Thank you so much!
P
Сделано говно, которое может восхитить только предельно тупых.
Ilmunya sangat bermanfaat ohm 🙏terima kasih ya ohmm 🙏salam kenal ohm 🙏🙏
Thank bro so much!
Phenomenal!! 👍👍
Thanks!
¿ y los engranes que funcion hacen ? Si los que giran son los baleros.
Sangat istimewa pembuatan penuh dngn ketekunan 😊
Thanks!
You are using bearings for your forms, so why do you need the rods they are mounted on to rotate too....? And what purpose do the gears serve...? Why don't you weld the bearings solid and then put a turn handle on one of the shafts to control your piece rather than push it around manually...? A lot of this project seems pointless...
Yo también me quedé pensando para que son los engranes si los baleros no los seguirán ?
@@m0parnut you said the same i thought
It's about control of part the idea you have does work if doing repetitive parts but if doing bespoke panels slowness is key ...your way is used for more rolling metal edges both have there own uses but technically do the same job 😂
Parabéns ficou top.👏
Really great work you guys show's how fun welding can be great work keep it up
Thank you so much!
@@KwandoTechnic do you make some for sale?
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Muy buen equipo y un fino detalle para la herreria
Thank you so much!
Outstanding, innovative and very efficient! Subscribed.
Thank you so much!
@@KwandoTechnic .
Thank you for your video. I've wanted a bead roller for some time but can't justify the $3 or 4 hundred dollars for something that will spend most of it's time on a shelf. If the round stock was sized correctly you could add bead roller dies later and buy the louver dies. I think I would add a crank to feed the work though.
Many thanks for your opinion!
I’ve thought about cutting a barbell in half - you find them at the tip or garage sales, good steel that wont bend & has raised part to stop weights from moving.
I think the pressure needs to be even out on the surfaces. What an amazing video🇮🇳 love from india
Thank you so much!
@@KwandoTechnic keep us posted
Hi. First of all, congratulations on a very nice job. I would like to make the structure myself maybe you could give the dimensions?
Please see dimensions detail in video help me. Thank you so much!
Ĺ6
Very cool...thank you for sharing this with us...
You are welcome!
Okay, the metalwork was great, but first of all, to get any strength to thick metal you need to run continuous bead and crank up the welder. You have almost zero penetration, so the welds are prone to cracking. Second of all, why add any gears, when you can't use them? You should have welded the bearings stuck and added crank to the other side. So much unleashed potential in this project
I initially thought you were hating on this guy but it’s hard to argue with your observations and suggestions. You’re right about his welds. A crank would make it less likely to accidentally twist the metal while pushing it through the bearings. It would definitely make the process easier while adding a level of control. Nonetheless, I’m very impressed with his build. Thanks for sharing!
Perhaps those are for an eventual planned upgrade, though it has to be said that they either need to be keyed or shrink fit on the shafts to actually be feasible.
That being said, I do need (and will probably make) this thing for clamp weld patch making for automotive sheet metal bodywork, and it is better than nothing, but of course it can and will be done better.
DdddddddddddddddddddddddddddddddddDDDDDDDDDDDDDDDDdddddddddddDDDDDDDDDddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddďddddddddddďdddďddďddďdďďdďdddddddddddďddddddd
Awesome skill, thanks 💯❤️
Thank you!
HI BRO THANKS 4 SHARING YOUR VIDEO IT IS AMAZIN AND EASY TO MAKE IT SALUDOS from oaxaca mexico
You are welcome!
@@KwandoTechnic ggg
Me encantó la explicación,bien claro.felicitaciones..me lo voy a tratar de copiar
I do really appreciate your job. Keep it up. By the way, what' is d description of your solder weld. I love that. Is that expensive?
My welder is cheap and small. You can refer my welder at here: bit.ly/30T55h0
It is a TIG welder with cheap steel filler wire. Looks funny speed up in the video.
.
Loter manual sngt Quality 👍🤝 indonesia 🇮🇩
Thanks!
More popularly known as sheet groove maker, usually used in aluminium sheets (of up to 1mm thickness) for cladding pipelines of extreme temperatures. Great job there kwando. Should've made it a bit more awesome if you added a manual driving mechanism at the end of one of the shafts (where the gears are) for easy feeding in of your sheets instead of pushing them in hard, as well as adding up the U-shaped die (or bearing) aside from that L shaped one you got.
Many thank for your suggestions!
Drill and tap a shaft on each side that the handle can screw into
exactly. too hard to push. put a crank on the gear end. but it's not a bad idea, just... not many people have dog gears lying around the house) maybe you don't need them, or half of this tool. just a roller bearing, protruding from the bottom, and a cranked shaft at the top, with a welded bearing on the end. Roller bearing spins as you crank the welded bearing around. less work to build. less weight. no need for gears.
You mean bead roller
@@DC-te1gw that's kinda how the ones from the 70s were
GOOD JOB
Thanks!
Amazing work, as always!! That final peace you make is beautiful!!! I think im gonna try to put one together. Thanks for you videos!!! Keep it coming!!!!
Thank you so much!
How could you tell with all those video links covering the end result???
@@calysagora3615 It really is anoying you cant see the finished peace longer, but as he was about to finish It you cant see It. If you wanna see It more Just hit the pause. I did, It Works!!!!
Good Job Bro..Hilario linglingen here in Philippines
Thank you!
Muito bom 👏👏👏 Frizzo perfeito. Parabéns legal massa 👍
É mesmo!
W
Tay nghề cao.!!! 👍💖
Thank guy!
Muito bom gostei 👏👏👏👏
Gas to diesel:-)
Amazing ide... 🙏🙏
Thank you!
So could you tell us again, what purpose those gears/sprockets in the other end serve, when you are using roller bearings?
It kept system more balance.
@@KwandoTechnic oh ok, I was wondering.
Most useful device for design and construction works,
BRAVO, BRAVO, BRAVO! 💕🙌
Tuyệt vời quá bạn.
Hướng dẫn đầy đủ số đo sẽ tuyệt vời hơn nữa ạ
Many thanks for your opinion. I tried provide my measurements to everyone.
Nice job
Thanks!
Thank You Friend, first-class video, 👍👍👍👍👍 BIG THUMBS UP, ☘️☘️
perfect , thanks for sharing with us.
Lo felicito amigo está muy buena,
Bravo again...and Bravo...!
Thanks!
I was wondering what the gears were for. I was assuming that you were using the outer race of the bearings for the bead profile and were going to weld the bearings solid. But I understand now, the gears are counterbalance.
Thanks!
Buen trabajo muy bonito Saludos desde Nicaragua Johnny Guardado
Thank you so much!
Just amaizeing, wonderful.
Excelente Canal 👏👏👏👍👍👍
Thanks!
Досмотрел до конца видео, так и не понял зачем самоделке шестеренки? Так как если крутить за валы, то заготовка будет оставаться на месте, за счёт того что подшипники будут проворачиваться.
Что-бы не "проскакивало" и не "перекашивало".
Patch в смысле проскакивало если Валы в трубке проходят
Тоже не догоняю шестерни зачем
Good job.. i am from indonesia
Thank you!
You didn't weld the bearings solid so the crank and gearing does nothing. And you can see the shafts aren't turning at all, you just push the metal around.
The bearings are always going to spin. They are bearings haha. I guess it was future proofed so he could add other wheels one day? I don't know kinda weird
Good job...👍👍👍👍👍
Thank you!
I've never seen a TIG torch used like this...
A propfor
A
A
Aaaaqa
My best respectation! Cool!
Thank you so much!
Bom dia MESTRE, você é o cara... Genial.
Many thanks!
Amazing goo jobs brotther
Thank you so much!
Ottimo attrezzo, ancor meglio se fosse motorizzato. 👏👍
very good job brother
Thanks!
Está muy bueno su invento Socio, le FELICITO. Siga adelante, le tengo una pregunta. Este welder o soldador Usted lo fabricó, lo inventó. Funciona con soldadura de punto o es soldadura de arco?, Yo estoy suscrito a su canal.
Thank you so much! You can see my welder and order at here: bit.ly/30T55h0
Kkk ele é genial mas acho que não conseguiria .
Es soldadura TIG
Good work I like it too much
Thanks!
I have done a lot of sheet metal work but not with this type roller. Do you have dimensioned drawing that I can get from you?
Sorry sir, I don't have dimension to send you. Please see detail in video, I showed all of dimension in video. Sorry about this inconvenience!
Chingona la herramienta sr. 👍👍
what is the cutting disc you are using and brand of discwhat is the cutting disc you are using and brand of disc
Nice video, thanks :)
Даёшь приспособу профлист катать)!
Muy bueno👋👋!!
Thanks!
Impecable trabajo 👏
Thank you so much!
muy muy muy buen video gracias saludos desde buenos aires
Thank you so much!
Thought it would never happen, but finally saw an Angle grinder in action with its guard on.
Its all about those eyes!!!✌
Yeah really , that's good.
Hello i am a yelder and ai dont bot the guard on hhh lol
6@@vintygti 4 ；444771
4774还
nice tip brother God bless you
Thank you so much!
did i miss something? if the bearings are rolling whats with the gears on the other end of the shaft?
ತುಂಬಾ ಚೆನ್ನಾಗಿದೆ.. ಅಧ್ಬುತ
Many thanks!
It would be good to demonstrate what you are trying to create, otherwise the steps end up looking like witchcraft
Nice for build hot rod body car😀😀😀
No, I made it for my home doors
is good you pressing, new ideas for job....(no speak inglish)
Thank you!
Good job friend 👍👍👍🙏🙏🙏🙏
Thank you so much!
@@KwandoTechnic 👍👍🙏🙏
Brilliant love it
Super work
Thank bro!
Да это просто чудо
Very nice. Simple but effective!
Many thanks!
Me pareció, o soldó sin argón? Lo único que me intriga!
Também nunca t
Home Made stell metal mantap 👍👍👍
Many thanks!
Не понял для чего шестерни, всё равно валы "отвязаны" подшипниками.
Не один я из России. А что это у него за сварка?
@@Ринат-щ5м Тиг сварка.
Скорее всего тоже для создания рисунка... После прогонки через шестерни получится по типу гофрирования(или как правильней сказать).
Thanks bro, u have to me a lot on ur channel, thanks.
Thanks!
Eeeéeéeeéeeeeeeéeédeeeeeeeeeééeeaéeeeééeeeeeeeeéeee3eéeeeeeeéeéeeeeeeaeeeeéee3eeeeeeeeeeee
Still I dont get it why he used gears on one side when another side has bearings?
The gear make system balanced.
@@KwandoTechnic каким образом шестерни балансируют систему, если валы, на которых они крепятся, не вращаются?
It is a Bead Bearing Roller. Very OLD school.
It's in books. You prolly don't know about them.
As demonstrated, the gears are doing nothing.
The gears are for balance..if it possible to install handle in the gear for easy movement..
Very good. Thank you
Thanks!
Please learn TIG Welding!
Fantastic 👌
Thank you!