Are there any safety precautions I should be worried about? I wanted to make a Chainsaw Man mask using another tutorial and make the moving chainsaw using this one Can I still paint it, or would they short circuit anything and leave it unable to be used?
The important thing for this cosplay is the torque of the motor, this is what will make the chain or belt move more easily. So any motor with more torque would be better. I hope this helps :)
@@satsukicosplayAnother minor question, by any chance is it possible to not have the pulley wheels have side parts to maintain the wheel, given that the cardboard is at a close distance and that the belt and wheel are wide enough as to not shift around?
Anyone know of a better motor to use that has more torque? She said it might be better to go with something that has a higher voltage but I’m thinking it’s more torque so the motor doesn’t stall.
Yes, the more torque the better, our only concern was the speed of the rotation, because usually the more torque a motor has the slower it becomes, but that's not exactly as issue, the saw doesn't need to go super fast. But yeah either way a stronger motor is better for this, the only problem is hiding it if you're doing the arm saws :)
Nós usamos aquele mesmo motor pra fazer a serra funcionar, mas ele estava encaixado em uma caixa redutora, pois ficaria mais conveniente para encaixar nas roldanas e também porque essa caixa redutora deixa o motor com mais torque, o que ajuda na hora de mover a serra. E dependendo do tamanho do motor ele vai acabar ficando um pouco pra fora da serra mesmo, não tem muito o que fazer. Espero ter ajudado :)
I love ur tutorial but I have a question! How did u connect the wires to the battery pack? I bought the same one as you did in your description but mines didn’t have wires attached
Hello. That saw I made it was fat, so I open it again and try to make wheels slim. And I get slim band. Is it worth to convert in slim? Will it work like before? Is there disadvantage to make slim?
@@satsukicosplay I made the slim. But the band was flipping side by side. And my resources got over. I can't do changes anymore. Now I will make by another pattern. I learnd from my mistake. If I made again so It will better than before. I have to learn a lot
We live in Brazil, and here we have this material called " papel paraná " or parana paper, it's a kind of cardboard that is less maleable and generally tougher than plain cardboard, but you can use any material that is hard enough, even normal cardboard can work fine, the helmet saw on our chainsawman cosplay was made using regular cardboard from boxes. I hope this helps :)
@@satsukicosplay okay thank you. I think it looks like it’s what we call here in the states “cardstock”. It’s used in framing and sometimes in packaging.
una pregunta seria, la sierra esta echa a proposito asi de flacido? es que el carton en la parte que el motor no se puede pegar pues queda suelto y sin refuerzo y por culpa de eso tanbalea mucho
Parabéns Parceira, muito boa a explicação, Detalhada, muito bom Parabéns, você tem um grande futuro com esse talento. Continue assim, você vai longe, seus cosplay's são incríveis 👍✌️
Eu usei ambos! Papel paraná para as serras dos braços e papelão para a cabeça. Ambos são bons! Se eu fosse recomendar algum, seria o papelão, por ser mais leve e mais fácil de trabalhar :)
Ahh, que pena 🥺 acredito que houve algum problema que poderíamos resolver! Sabe me dizer o que falhou exatamente? Alguns pontos como tamanho/grossura da correia, potência do motor e solda podem influenciar na funcionalidade!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
amazing as usual ❤️❤️❤️ I'm gowilycosplays and your tutorial are so helpful
Awnn thank you soo much! 💖💖💖
Faz um Pochita, ele vai ficar muito fofo e também vai combinar demais com o Cosplay do Denji 😁
Vou fazer 🥰
Hi! Wonderful tutorial :) ive never used a soldering iron before, but what temperature did you have yours at to solder the wires? Thank you 😊
Thank you so much ❤❤
Are there any safety precautions I should be worried about? I wanted to make a Chainsaw Man mask using another tutorial and make the moving chainsaw using this one
Can I still paint it, or would they short circuit anything and leave it unable to be used?
You just need to be careful around the motor and battery, other than that you shouldn't have any problems painting the saw.
Bem interessante. Gostei. Parabéns!!!
Muito obrigada 🤩✨️
Muito bem explicado, bem que fiquem na dúvida da parte eletrônica, faz o Pochita por favor
Muito obrigada! 😍 vou fazer sim 🥰
Question, instead of the motor used, could've you use a smaller, less powerful stepper motor?
The important thing for this cosplay is the torque of the motor, this is what will make the chain or belt move more easily. So any motor with more torque would be better. I hope this helps :)
@@satsukicosplay thanks! That helps a lot! Though do you have any ways of making the arm blades thinner with the assembly?
@@satsukicosplayAnother minor question, by any chance is it possible to not have the pulley wheels have side parts to maintain the wheel, given that the cardboard is at a close distance and that the belt and wheel are wide enough as to not shift around?
Anyone know of a better motor to use that has more torque? She said it might be better to go with something that has a higher voltage but I’m thinking it’s more torque so the motor doesn’t stall.
Yes, the more torque the better, our only concern was the speed of the rotation, because usually the more torque a motor has the slower it becomes, but that's not exactly as issue, the saw doesn't need to go super fast. But yeah either way a stronger motor is better for this, the only problem is hiding it if you're doing the arm saws :)
@@satsukicosplay thanks for the reply. Any recommendations for a better motor? Love the videos. Thanks for going into so much detail in them.
Uma pergunta, se eu quiser usar um motor como o do minuto 10:52, como posso acomodá-lo? (Só vai para a frente não para os lados), obrigado
Nós usamos aquele mesmo motor pra fazer a serra funcionar, mas ele estava encaixado em uma caixa redutora, pois ficaria mais conveniente para encaixar nas roldanas e também porque essa caixa redutora deixa o motor com mais torque, o que ajuda na hora de mover a serra.
E dependendo do tamanho do motor ele vai acabar ficando um pouco pra fora da serra mesmo, não tem muito o que fazer.
Espero ter ajudado :)
I love ur tutorial but I have a question! How did u connect the wires to the battery pack? I bought the same one as you did in your description but mines didn’t have wires attached
I know I'm late but in the description of the battery pack it says it requires 9V battery type snap clip
mega helpful! the extra explanation is exactly what I was lookin for!
Thank you so much! 😍
Muito obrigado, sempre ajudou muito 🌟
Obrigada 😭✨️
@@satsukicosplay de nada 😁👍
Hello, regarding the LEDs of the eyes, did you have to weld a resistor? thanks
Hi! In my case, I didn't need the resistor because the voltage of the led and the battery was the same 😊
@@satsukicosplay Thanks :)
Muchas gracias Tu vídeo me ayudó mucho, hice la sierra completamente de cartón, solo en los picos y la banda usé el foami.
Muito bom vídeo!!!! Acho incrível pessoal que faz as props de cerra do Denji é trabalhoso mas o resultado é incrível 💚
Ahh muito obrigada! 😭♥️ dá um trabalhinho mesmo, mas esse cosplay é super divertido de fazer! 🥰 obrigada de coração pelo seu comentário 💖
Hello. That saw I made it was fat, so I open it again and try to make wheels slim. And I get slim band. Is it worth to convert in slim? Will it work like before? Is there disadvantage to make slim?
No, it's okay to slim it down a little, it won't interfere with the saw's operation :)
@@satsukicosplay I made the slim. But the band was flipping side by side. And my resources got over. I can't do changes anymore. Now I will make by another pattern. I learnd from my mistake. If I made again so It will better than before. I have to learn a lot
Gostei ficou demais
Muito obrigada! 💖
Perfeito
What kind of cardboard is that? Cardboard where I live is like that of a box.
We live in Brazil, and here we have this material called " papel paraná " or parana paper, it's a kind of cardboard that is less maleable and generally tougher than plain cardboard, but you can use any material that is hard enough, even normal cardboard can work fine, the helmet saw on our chainsawman cosplay was made using regular cardboard from boxes.
I hope this helps :)
@@satsukicosplay okay thank you. I think it looks like it’s what we call here in the states “cardstock”. It’s used in framing and sometimes in packaging.
No entiendo el idioma pero estoy encantado por el tutorial
Muchas gracias! Pero puedes activar los subtitulos en Espanol en la configuración del video 🥰
Eu amo o denji valeu
Adorei❤
una pregunta seria, la sierra esta echa a proposito asi de flacido? es que el carton en la parte que el motor no se puede pegar pues queda suelto y sin refuerzo y por culpa de eso tanbalea mucho
Muito boa a explicaçao, como sempre ♡
💖💖💖
El detalle es increíble muy bueno pero no tienen plantillas de las dimensiones del casco?
I don't have it I'm sorry 😭💔
Parabéns Parceira, muito boa a explicação, Detalhada, muito bom Parabéns, você tem um grande futuro com esse talento. Continue assim, você vai longe, seus cosplay's são incríveis 👍✌️
Muito obrigada! Fico lisonjeada em ouvir isso 😍💖💖💖
qual fio vc utilizou??
Qual é melhor, papel Paraná ou papelão?para fazer a base da serra e as serras
Eu usei ambos! Papel paraná para as serras dos braços e papelão para a cabeça. Ambos são bons! Se eu fosse recomendar algum, seria o papelão, por ser mais leve e mais fácil de trabalhar :)
Estou pensando em fazer pra motoserra do Grell sutcliff de kuroshitsuji
Tenho certeza que vai ficar muito bom, espero que esse vídeo tenha ajudado de alguma forma :)
Parabéns muito bem explicado ...sucesso sempre .
Muito obrigada 😍🥰🥰🥰
Mantaappp
Ensina a fazer os chifres do Yamato de OP
Sugestão anotada! 😍♥️
❤
Belt name please
It's EVA foam 😊
Thanks
consegui ligar uma miniserra com uma bobina de tesla
Eu e meu cosmaker seguimos passo a passo do vídeo e infelizmente minhas 3 serras não funcionaram 😭😭💔
Ahh, que pena 🥺 acredito que houve algum problema que poderíamos resolver! Sabe me dizer o que falhou exatamente? Alguns pontos como tamanho/grossura da correia, potência do motor e solda podem influenciar na funcionalidade!
Os motores funcionaram bem,porém eles não faziam as engrenagens girarem fica só o motor ligado
A câmera tá boa ne?
@@GabrielFerreiraalves-xv3to Minha câmera não é muito boa 😞 mas logo logo quero investir em uma melhor, assim que puder ☺️✨️
Template please