Semi current is always higher than Full auto, just the pulse is too short for regular equipment to measure it fully. Rapid semi trigger pull can give a slightly more accurate reading.
question in regards to brushless motors, particularly these 2... I know some brushless motors don't play nice with active braking but I recently picked up a CYMA Platinum SLR AK with Eshooter basic ETU. I have no way of turning off AB which I read is fairly aggressive with this ETU. Would it be a bad idea to go brushless with it or should I just dump the Eshooter and pop in a Perun? I have good response with the CYMA torque motor and short stroked 12:1 gearbox but we always want more, haha.
@wyshtechairsoft is that due to just the ETU or do you feel like the CYMA Platinum gearbox isn't stout enough to run a brushless with 12:1 gears? It's shooting 390 fps so I imagine it's pulling an m110-120 spring.
Cool vid. The Solink LITE is a great motor, I just uploaded a quick video showing the no-load RPM of the Solink, T238 and a Warhead. I also did a no-load heat test as well, the T238 was a good 15% hotter than the other 2. Solink do say there's is compatible with all ETU's, apart from the NGRS Titan with 7.4v. One another thing to note. The LITE does still have it's 20% speed selector, it's under the end-cap.
Do visit my page and watch the video of how i manage to get a very low amp draw around 15 to 13 amps using m150 spring, solink lite BL motor and perun hybrid
Super nice comparison, great vid. Q about the t238 and perun, any issue so far with both of them? In your comparison the AB it was off right ? I heard some interesting facts with the t238 brushless quick response ones and perun that can damage the motor if you are using the de-coock or spring release function that perun haves. I use it a lot on my builds and hopefully I will not press it from habit 😅🫣
@ hmm okay, what you mean by newer perun hybrids? I was not aware of multiple versions of perun v2 hybrids. How I can check this? And AB default is like lvl 3 if I’m not wrong right?
Doing gods work with these videos
Semi current is always higher than Full auto, just the pulse is too short for regular equipment to measure it fully. Rapid semi trigger pull can give a slightly more accurate reading.
Great video! good job!
Nice comparisons. It has me thinking I may need to have you work on the M4 I bought and get a Solink Lite in it
question in regards to brushless motors, particularly these 2...
I know some brushless motors don't play nice with active braking but I recently picked up a CYMA Platinum SLR AK with Eshooter basic ETU. I have no way of turning off AB which I read is fairly aggressive with this ETU. Would it be a bad idea to go brushless with it or should I just dump the Eshooter and pop in a Perun? I have good response with the CYMA torque motor and short stroked 12:1 gearbox but we always want more, haha.
Honestly, I wouldnt risk it.
@wyshtechairsoft is that due to just the ETU or do you feel like the CYMA Platinum gearbox isn't stout enough to run a brushless with 12:1 gears? It's shooting 390 fps so I imagine it's pulling an m110-120 spring.
@@Liq38 Eshooter works great with Solink, I have had no issues with both basic and bluetooth version.
Very cool comparison 👍
Cool vid. The Solink LITE is a great motor, I just uploaded a quick video showing the no-load RPM of the Solink, T238 and a Warhead. I also did a no-load heat test as well, the T238 was a good 15% hotter than the other 2. Solink do say there's is compatible with all ETU's, apart from the NGRS Titan with 7.4v.
One another thing to note. The LITE does still have it's 20% speed selector, it's under the end-cap.
Wait, so there is a switch under the cap??
25amps to pull m110 spring at 19rps/11.1v. Is this a normal and well functioning AEG to use as comparison? Someone help me out here to understand.
Do visit my page and watch the video of how i manage to get a very low amp draw around 15 to 13 amps using m150 spring, solink lite BL motor and perun hybrid
Yes because an OEM motor was used in this video as a comparison.
Why only bearings on the bevel gear?
Thats the way it was stock. Wasnt necessary to swap.
Super nice comparison, great vid. Q about the t238 and perun, any issue so far with both of them? In your comparison the AB it was off right ? I heard some interesting facts with the t238 brushless quick response ones and perun that can damage the motor if you are using the de-coock or spring release function that perun haves. I use it a lot on my builds and hopefully I will not press it from habit 😅🫣
AB was on default setting in the video. The newer perun hybrids dont have any decocking issues.
@ hmm okay, what you mean by newer perun hybrids? I was not aware of multiple versions of perun v2 hybrids. How I can check this? And AB default is like lvl 3 if I’m not wrong right?