If i already have a stamped concrete patio outside and want to resurface and bring back to life from weathering and fading would I use the degreaser wash, water stain, and sealer only? Or are there other steps? Thank you!
You would have to use a sealer stripper before resurfacing anything :) You can find our stripers here- globmarble.com/index.php?route=product/search&search=strip
Yup! You need to make sure the slab is completely clean and profiled. You can watch this video on how I did it over a cementitious board (you would do it the same way)-ruclips.net/video/0u0f5BWmz3o/видео.html
That is cool! But if I'm doing this on my bathroom floor inside my house, how would I rinse it off to clean it the way you did? So much liquid on a floor inside the house. I would have loved to see this is a more real world work environment bc I can see a lot of issues trying to translate this to a room inside the house. Also, what about air vents and so on. I am seriously considering doing something like this and why I'm asking. Not seeing anyone else asking this so I'm concerned I might be missing something or these other people are more familiar with this kind of work. Thanks!
You would probably need to remove the water by hand with a sponge and bucket and I cant promise that it wont be tedious. The finished look would really be worth it though :)
It wouldn't be recommended because the laminate has a tendency to rise from the subfloor. The best bet would be stripping the laminate and applying directly to the subfloor.
Me diga que produto é este que você colocou, este pó branco, e,este,pequeno,gostaria de fazer aqui na minha casa,mais queria saber o nome de todus produto, e onde, eu ,em contro ora comora. , gostei muito, lindo trabalho
All depending on the stamp you are using. It must be a little bit over the distance from the lowest point on your stamp, to the highest point on your stamp. For this specific video I think it was one quarter inches thick.
You can check the description for the exact mold I used, but you can check out all of our stamp options here- globmarble.com/stamped-concrete/concrete-stamp-mats/
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Love that stamp. I plan to use it for my shed build. I am planning to make it look medieval on the inside.
Sounds really cool! it's much easier than it looks :)
Gorgeous easy to follow
Thank you! 😊
Great Job.
Thanks!!
Se ve muy bien quedó chido el color y el estampado
Thanks!!
Quality work mate👍
Thank you! Cheers!
GORGEOUS!!!
Thanks!!
Would you add a video about resealing stamped concrete with grit to prevent slips?? Or what to do with cracks?
Awesome bro....🔥
Thanks!
If i already have a stamped concrete patio outside and want to resurface and bring back to life from weathering and fading would I use the degreaser wash, water stain, and sealer only? Or are there other steps? Thank you!
You would have to use a sealer stripper before resurfacing anything :) You can find our stripers here- globmarble.com/index.php?route=product/search&search=strip
so freaking cool!!!!!!
Thanks!
What's the Brenda name of the concrete saw cuter you used on wood stapled, and where I can buy it
How much would you charge to do like 800 sqft inside the house including materials cost and labor
Will this help mute noise transfer between floors?
Basically, Its concrete :)
Can it be used on existing concrete slab?
Yup! You need to make sure the slab is completely clean and profiled. You can watch this video on how I did it over a cementitious board (you would do it the same way)-ruclips.net/video/0u0f5BWmz3o/видео.html
Nice work mate! Thank you.
A follow up question though, how long does it last and what can you do to repair it after years?
That is cool! But if I'm doing this on my bathroom floor inside my house, how would I rinse it off to clean it the way you did? So much liquid on a floor inside the house. I would have loved to see this is a more real world work environment bc I can see a lot of issues trying to translate this to a room inside the house. Also, what about air vents and so on. I am seriously considering doing something like this and why I'm asking. Not seeing anyone else asking this so I'm concerned I might be missing something or these other people are more familiar with this kind of work. Thanks!
You would probably need to remove the water by hand with a sponge and bucket and I cant promise that it wont be tedious. The finished look would really be worth it though :)
Shopvac... Electric pressure washer will allow you to use less water
can i do this over vaneer or laminate?
It wouldn't be recommended because the laminate has a tendency to rise from the subfloor. The best bet would be stripping the laminate and applying directly to the subfloor.
Me diga que produto é este que você colocou, este pó branco, e,este,pequeno,gostaria de fazer aqui na minha casa,mais queria saber o nome de todus produto, e onde, eu ,em contro ora comora.
, gostei muito, lindo trabalho
Thanks! all of the products I used are linked in the description
How many inches does the concrete have to be
All depending on the stamp you are using. It must be a little bit over the distance from the lowest point on your stamp, to the highest point on your stamp. For this specific video I think it was one quarter inches thick.
Where can I get a mold to huy
You can check the description for the exact mold I used, but you can check out all of our stamp options here- globmarble.com/stamped-concrete/concrete-stamp-mats/
Também este molde
👍👍👍👍