*EASY* Brake, ABS, Traction Control Lights Fix Video
HTML-код
- Опубликовано: 16 сен 2022
- Wes explains how to interpret multiple dash lights, how to fix a wheel speed sensor fault, and how to save money in the process.
Welcome to “The Stanley Way” channel where we will cover just about every project that a typical American family will encounter. This is not a “pro how to” channel, just an ordinary guy videoing his own projects.
Current and future projects include converting two bedrooms and a bath into a movie theater, installing a hybrid water heater, cleaning and painting the garage floor, building a mega shed, Kiwico projects, installing a hybrid solar panel system and many auto repairs.
We will also post videos of various DIY science projects, mountain bike rides, and whatever else we like to do.
You may learn something, you may not, but somewhere along the line you will probably laugh as Wes documents even his most embarrassing mistakes.
I think I have that right rear sensor issue. The wires at the clip came apart . Taped them together ... Then a friend said he soldered it. Now it's hanging down again. I just checked it today. So I am gonna get under there and check it out again. It was the perfect video for me at this moment. Awesome explaining. Thank you . I will keep you updated. 😂just what I think I needed to see. The actual showing off the wires looked like something I have had a problem with. Sorry for rambling but I have been searching for answers. Ty so much
I am an older grandmother, single and doing car repairs that I can on my own. Sometimes with the help of a few friends or grandsons. I appreciate the comments at the end of your post when you say if money is an issue. Well unfortunately for me yes, it is. So, I will take your advice, save up the money to buy the Blue Driver, and will drive old school just like when I was 17, and proceed from there. Thank you for the tips.
Thank you for being so honest!
Thanks for the sound advice.
Great video!! I just changed the rear brake pads on our 2011 prius and all these lights came on. I did discover a caliper guide pin was seized up so changed that and the lights went off. Now they're back on. I need to scan it for speed sensors now.
Excellent Video. Good Advise given.
Thank you for the video! I had this exact same thing happen to me the other day.
Cool tool!!
Thanks for the video
You're Good.
All these lights came on twice in my 2010 Dodge ram truck and the issue was the wheel bearing both times. But it's also pretty easy to tell when a bearing goes too.
Thank you Stanley. I have same issue and light remain on. Keep on driving. My old car 40 years ago had no computer.
Thanks for this info. video. I got a question. Abs, traction control and tyre pressure lights on my toyota proace (2019) van stay on. These lights appeared first after i had the van parked for a week. The lights went off almost the whole day today then reappeared. Toyota says rear abs sensors are broken, while they do seem intact and if they were broken, the lights wont go off randomly.
Very informative. I’m not a mechanic but I agree 100%. But with my Auto 4WD Pathfinder, I suspect my lights are on because my front tires wore much faster than the back. Could that be the case. And could this damage the other parts in the 4x4 system? I feel like since the idiot lights are on, then it’s only operating in 2WD (Front) and therefore no damage is being done. Does anybody have an opinion on that?
Excellent video!! I have a 2012 Dodge Challenger with 30,000 miles on it. Red brake light, ABS, traction control Those three lights came on. and stay on , taking it to the shop Monday just your thoughts, is it a pretty good chance it is just a wheel sensor. Didn’t know if you had an opinion about these certain cars. Thank you ! You’re very clear and understanding in your videos.
I replaced the all 4 WSS and the ABS, TCS, and Brake lights are still on. Does the Blue Driver erase existing DTCs?
Thx for the video I had my rotors and brakes done today on my 08 Jeep grand cherokee and the ABS,TRACTION CONTROL,ESP/BAS are still on.I will def follow your advice and f/u with u.I bet it's a wheel sensor because i've had 1 replaced before.
I have been having these issues in my 2010 Ford Edge and when these lights come on my car shuts off. I cannot find out if these are related. TCL turns on, red brake light, and ABS light. Brake pads and rotor were recently changed, found that front right caliper was sticking also. Would there be any reason this would cause a vehicle to stall at all? Cant seem to find any info on that, seems to be faulty brake system but cant figure out why it is stalling only when those lights come on.
So I have a check engine light, traction control, and abs light on. A few months ago they would come on and then go off. Already replaced abs sensor. But when these 3 lights are on my Nissan Titan will not go into 4 wheel. When they off it would go right in. Now all 3 lights seem to be er go off. Any ideas???
'14 scion tc w/ manual trans. had this start happening after getting the clutch/flywheel replaced. but it happened so rarely i didn't think it was related. on a couple of occasions the car would not start. I'd turn the ignition and all electrical power would shut off like a dead battery until i disconnected and reconnected the battery then drive fine. however, recently the indicator lights (ABS, brake, traction lights, a dimmed left blinker arrow) as well as the speedom needle drop for half a second would take place when I turned the A/C on. Battery was old so I replaced it last night because that was needed anyway.