hi, the software was included with purchase of the printer. I was sent the key code in an email. I had to download the software and input the code to get access without a time restriction. You have access for life for the version that you purchased. There no monthly/ annually charges after purchase. However, you would have to pay an upgrade fee for future versions. There is a limit on how many computers can use your key code. They can reset your code if you computer fails before deactivating the code on that computer. It happened to me a few times.
@@deeznuttz7980 yes is should work on Windows 11. I have mine running on 10. You can checks the specs on the CadLink’s website to be sure. You may need to download the drivers for your printer as well.
Hola me compré una dtf pero no me di cuenta que el rollo era de 8 pulgadas ,pregunta en el programa de rip traerá algo para cortar la imagen y sacarla en dos piezas,
Hi Thanks for watching. I do not know how to split large designs into small sections for printing within the RIP software. There are other editing programs that may be able to do that for you.
Hi I'm not sure but have you checked your settings? Take a look at the white under black setting. It could also be the color profile of the image when it was created. Did you try to print different images with black included?
@kanidanieldariusdad Currently I have it set at 280, but always check to see how the transfers are looking. Darkening of the white means too hot and the powder not melting enough is too cold. I have the time set to 90s.
@@kanidanieldariusdad I didn’t 😂. I couldn’t get it to change the units. I really don’t trust the temperature readout either. That why I just gauge it by how the transfers look.
Hello, I’m not sure what would cause that to happen. You would have to troubleshoot it. Does it happened with all your images? If yes, try running cleaning cycle. It is possible you have a clog in one of the ink lines.
Hi Heather, V10 is harder to find since they are pushing V11. I was able to find one link. I do not know this company so research it further before you decide to downloading the file. You can download the 15 day trial version. Then enter your full license code after installation is completed. dtgpro.com/cicproduct/dtf-pro-cadlink10.php?v1=Desktop%20Edition%20-%20Trial%20Version Best of luck.
Good question, I am not sure. I suspect that V11 has more features than V10. You can do the trial version of V11 to determine if it is worth the upgrade.
Hi, I’m not sure what may be the problem. Check your cables and maybe restart the software. Usually once the printer is connected and on it would give you an option to add your printer.
Hi, I’m not sure. Have tried gently cleaning the front part of the head with a swab and cleaning solution. AA Print Supply shows how to do it in one their cleaning videos. You can run a few lines of yellow to see if it keep doing the print error.
@@nikittyworkshop funny thing is when I run lines it’s prints yellow but when I printed yellow image it would print a lil black first , I took the print head apart and cleaned it , this printer ain’t for the weak hearted lol
@@kanidanieldariusdad oh wow, sorry you have to go through that already. Figured you would have at least 6 months before having to do that. Yea are correct this printer is not for the weak hearted.
@@nikittyworkshop it was a lot of ink caked up around the edge of the print head , if I print yellow by it self it give a hint of black , but if yellow is the secondary color it prints without the hint of black
@@kanidanieldariusdad you may have to contact AA Print Supply to find out what to do. The printhead may still be under warranty so they can send you a new one. Plus they may have some tips they can provide you. I have not experienced that with my printer. I run a 1” x 1” square of each color yellow, cyan, magenta, black and white. To help unclog the print head and get the ink running.
Really appreciate the information, Great video. Thank you for sharing 😀👍.
when you purchase cadlink is it digital just pay and download digitally and that's it and how long will it last you ?how long can you keep it?
hi, the software was included with purchase of the printer. I was sent the key code in an email. I had to download the software and input the code to get access without a time restriction. You have access for life for the version that you purchased. There no monthly/ annually charges after purchase. However, you would have to pay an upgrade fee for future versions.
There is a limit on how many computers can use your key code. They can reset your code if you computer fails before deactivating the code on that computer. It happened to me a few times.
@@nikittyworkshop I already have the epson 8550 just need the software will it work on laptop windows 11
@@nikittyworkshopsomeone told me yes as long as I have windows 11
@@nikittyworkshop did you buy yours from Best buy
@@deeznuttz7980 yes is should work on Windows 11. I have mine running on 10. You can checks the specs on the CadLink’s website to be sure. You may need to download the drivers for your printer as well.
Hola me compré una dtf pero no me di cuenta que el rollo era de 8 pulgadas ,pregunta en el programa de rip traerá algo para cortar la imagen y sacarla en dos piezas,
Hi Thanks for watching. I do not know how to split large designs into small sections for printing within the RIP software. There are other editing programs that may be able to do that for you.
I’m having an issue where my white is not layering on top of my black but it layers on all the others colors just not black can you please help me?
Hi I'm not sure but have you checked your settings? Take a look at the white under black setting. It could also be the color profile of the image when it was created. Did you try to print different images with black included?
my laptop communicates with printer but my cadlink software doesn't why is that
Do you do a head clean before every print …
I do head cleaning at the start of the day. If I have a lot to print then I do another one after about 4 hours of printing.
@@nikittyworkshop yes me to , I’m about to get on it now , what temp do you cure the prints cus you know the oven only shows celcius
@kanidanieldariusdad Currently I have it set at 280, but always check to see how the transfers are looking. Darkening of the white means too hot and the powder not melting enough is too cold. I have the time set to 90s.
@@nikittyworkshop how do you get to read Fahrenheit
@@kanidanieldariusdad I didn’t 😂. I couldn’t get it to change the units. I really don’t trust the temperature readout either. That why I just gauge it by how the transfers look.
my def- prints come out blue ish. Is there a fix for this?
Hello, I’m not sure what would cause that to happen. You would have to troubleshoot it. Does it happened with all your images? If yes, try running cleaning cycle. It is possible you have a clog in one of the ink lines.
Do you happen to have the link to download the 10v version?
Hi Heather, V10 is harder to find since they are pushing V11. I was able to find one link. I do not know this company so research it further before you decide to downloading the file. You can download the 15 day trial version. Then enter your full license code after installation is completed. dtgpro.com/cicproduct/dtf-pro-cadlink10.php?v1=Desktop%20Edition%20-%20Trial%20Version
Best of luck.
Is this the same as V11
Good question, I am not sure. I suspect that V11 has more features than V10. You can do the trial version of V11 to determine if it is worth the upgrade.
i dont see my printer under port
Hi, I’m not sure what may be the problem. Check your cables and maybe restart the software. Usually once the printer is connected and on it would give you an option to add your printer.
Hand is raised !!!!! How come when I print yellow a hint of black comes out first
Hi, I’m not sure. Have tried gently cleaning the front part of the head with a swab and cleaning solution. AA Print Supply shows how to do it in one their cleaning videos. You can run a few lines of yellow to see if it keep doing the print error.
@@nikittyworkshop funny thing is when I run lines it’s prints yellow but when I printed yellow image it would print a lil black first , I took the print head apart and cleaned it , this printer ain’t for the weak hearted lol
@@kanidanieldariusdad oh wow, sorry you have to go through that already. Figured you would have at least 6 months before having to do that. Yea are correct this printer is not for the weak hearted.
@@nikittyworkshop it was a lot of ink caked up around the edge of the print head , if I print yellow by it self it give a hint of black , but if yellow is the secondary color it prints without the hint of black
@@kanidanieldariusdad you may have to contact AA Print Supply to find out what to do. The printhead may still be under warranty so they can send you a new one. Plus they may have some tips they can provide you. I have not experienced that with my printer. I run a 1” x 1” square of each color yellow, cyan, magenta, black and white. To help unclog the print head and get the ink running.