2023+ Toyota GR Corolla Oil Cooler Kit Install Guide
HTML-код
- Опубликовано: 24 авг 2023
- A step by step guide to installing Mishimoto's 2023+ Toyota GR Corolla Oil Cooler Kit!
Bumper Removal Video:
• 2023+ Toyota GR Coroll...
Order the Oil Cooler:
www.mishimoto.com/oil-cooler-...
Model:
MMOC-GRC-22
Product Features:
-Direct fit for 2023+ Toyota GR Corolla
-Reduces oil temperatures by an average of 13 degrees
-Adds 0.76 qts of oil to system for increase cooling efficiency
-Dual-pass 14 row oil cooler adds significant cooling capability
-Pre-assembled -10AN lines and fittings ensure ample flow at high RPM
-Includes nylon-sheathed stainless-steel braided lines for high pressure tolerance and durability
-Bar-and-plate oil cooler is strong and durable enough for street or track use
-Direct-fit brackets make installation easy without drilling into body
-Anti-vibration mounting grommets protect oil cooler over harsh road conditions
-Available with thermostatic sandwich plate for daily drivers or non-thermostatic for dedicated race cars or hot environments
-Includes everything needed for installation
-Mishimoto Lifetime Warranty!
Social:
Instagram: / mishimoto
Facebook: / gomishimoto Авто/Мото
For anyone who may be wondering, the torque spec for the oil filter sandwich plate center bolt is 30 lb-ft
Who else watches these and don’t even own the vehicle 😅
Is this kit available now?
Coming soon!
Can this also fit the M20A fks motor of the regular Corolla hatches
This is not something we have tested. Sorry!
So i installed 2 hella horns and drilled out the exact spot symmetrical to where the oem was on the passangwr side... so this mount wont work for the location. Is there another location that wont interfere with ducts etc?
Not that we know of. You could always move the horns ;)
@@mishimoto yeah I guess that’s just how it goes. Navigate drop brackets for everything
What a pain in the ass this install is. Also watch out because if you are not laser straight with the tube nuts and the cooler fittings you will shave off aluminum from the cooler threads very very easily with just finger pressure and your engine won’t like it. Do not opt out of leaving the plastic shroud installed. 1. It’s helps guide air to the intercooler 2. It leaves a piece of plastic just hanging on that side.