Replace Mechanical Seal in Swimming Pool Pump. Spa Motor leaking? New seal Installation. How to
HTML-код
- Опубликовано: 9 фев 2025
- Step by step guide to replace the mechanical seal in your Pool or Spa pump and motor.
Replace Mechanical Seal in Swimming Pool Pump. Spa Motor leaking? New seal Installation
If you need to replace your pump or other pool Equipment
Mark runs PoolnSpa Supplies Australia he sells Pool n Spa equipment Australia wide.
So if you need a New Pump or Parts for your Spa or Pool at a good price. Contact him at PoolnSpa.net
The distinctive of PoolnSpa Supplies Australia is that you always just speak to industry professionals so we ensure you get the right equipment every time.
Affiliate Links to Buy:
Pentair, Purex, Hydrotech (PS-200 Shaft Seal)(354545)Pump mechanical seal: amzn.to/2FKbB4U
Make sure you match your Pump brand and Model.
AquaFlo Sp2 seal: amzn.to/2FBnHNw
Replacement motor: amzn.to/2YlvmGg
Impeller: amzn.to/3aNiPka
Flex head Ratchet Spanners: amzn.to/2EdF4nd
Stanley Basic Tool Kit 65 piece amzn.to/2SmxN6a
Stanley Basic Tool Kit 210 piece amzn.to/2QAukUf
Silicone Lubricant: amzn.to/3hknqN1
Muffins
Just changed the mechanical seal on my pool pump the wife was adamant that we needed a new pump and motor showed her your video and she was really happy with the step by step description / instructions
Sounds Great Well Done. MRT
Gripping around the outside of the impeller is best. Very easy to crack on the nose, but if you have too I recommend plugging the the nose of the impeller to prevent cracking
Hi mark how do I contact you please I have a p320 question
Contact PoolnSpa Supplies Australia. PoolnSpa.net
i just changed mine and its over heated after 20 mins running perfect and it melted the backing plate .. wat could cause that ??
That happens when the pump is run without water so it may have taken too long to prime up with water. Or maybe it never filled with water.
If it just has a little water that can boil in there. Again if that happens it will melt the plastic
@@Marksreviewsandtutorials yes it took about 5 mins to prime up but then run great for about 20 mins then it just pissed out ... i took it back apart and the mechanical seal looked like it was burried into melted plastic 🤦🏼♂️🙈 iv managed to clean it up put another rubber seal in with a little silicone then put the white ceramic ring in .... sbould the mechanical seal on the impeller be bonded on incase it spins on the shaft ?? its pretty tight fit anyway ... thank you for your reply ❤❤
@@spandangle334 Sadly it is doubtful that you can repair it from there without replacing parts. There are tight tolerances on where the seal sits and the pressure between the two parts of the seal and the seal faces have to be flat.
It sounds like it ran with just a little bit of water which then overheated due to the friction in the pump melting the plastic.
Let me know if you want some pricing on pump parts or a new pump.
Mark
Nillumbik Pool & Spa Service Australia
Have you a phone number or how can I order seals