👍🏻 thanks for sharing. I looked at the Ryker, loved the Rally. Ended up with a 2021 Spyder. Found one slightly used (705 miles). It’s just like new. The original owner traded it for a touring/ Limited model. He and his wife wanted something they could tour on.
I have over 500k on reverse trike and am a design engineer so my opinions. Just an FYI that screening will restrict a minimum of 60% air flow. I would remove all the screening and install simple window screen in front of the radiator as that will only restrict 5-8% also the shock adjustment does not stiffen or soften the ride it only changes the ride height. I am well aware of CanAm and specs etc and one of the things of issue is poor tire wear mainly due to over pressure. I know CanAm recommends 28 rear 24 front I would go 20 rear 16 -17 front for best wear plus it will improve handling.
Really good tips thank you, looking to buy a Ryker over the pond in the UK, it’s a bit more difficult buying accessories here as ownership is very limited (I’ve never seen one on the road here!) so it’s even more important to buy the right parts in the first place before shipping to the UK. Thank you for your video and your time sir.
Hey Tow I I…my wife and I have two of these…get the end links and the sway bar…on the interstate…70 75 straight as an arrow…I think they install a squirrel at the factory this completely illuminates that feel. Happy riding
What would that cost to do ?? I'm looking at a gently used Ryker and on the test drive it seems to wiggle back then you adjust while riding then it wiggle back the other direction...I'm used to riding a bike
@@robertsalyers1351 hello Robert…if I recall the sway bar is a couple of hundred or less and if you are somewhat mechanical you can do it yourself. The end links are not much and you would be doing those at the same time. There are several tutorials on you tube. The difference is night and day and really firms up the ride. In my opinion, it is a must. I don’t know why Can-Am does not just install the better sway bar from the factory. have a great day.
the grill plates look great. I bought one that has a clover type pattern on it from Lowes or Home Depot and Installed it on my Scion xB that had a Japanese Body kit and the front bumper was just a wide open mouth. I agree with you on getting something with bigger holes for the intakes too. I was trying to figure out what that thing was on the back of your seat the whole video till you said. I thought it was a police baton lol.
We just bought a Ryker for our son and I do not like the radiator being so unprotected. I like the screen you installed on yours. What is that kind of screen called and where can I purchase some of it? Thanks for sharing.
I’m still waiting for that rally bravo it’s mid August I been waiting since early July 🤦🏾♂️ they said I’m 1st on the list BUT time is flying 🤦🏾♂️ I at least want a few rides out of it
i was suppose to buy one i talk too three mecanic everyone told me dont touch that jacques to many issue and after 700 klm the fisrt issue i would have to change the brake pads all around for me it a peace of problem the plastic very sheep hard on gaz about 30 mille gallon
@@TOWIIBRAVO Wanting to be clearly seen by others drivers is a good thing. I've added extra lights to the front and rear of my motorcycle for that very reason. Just understand that by using your high beam lights that you are also creating a hazard for other drivers. Most states, including PA, have laws requiring you to dim your lights when within 500 feet of another vehicle. So you would need to be constantly turning your high beams on and off to comply. If you don't want to install additional lights, another option is you can install a switched modulator that will flash your headlights during the day to make them more noticeable to other drivers without making them brighter and blinding others.
The additional screening looks good and works great! Well done.
👍🏻 thanks for sharing. I looked at the Ryker, loved the Rally. Ended up with a 2021 Spyder. Found one slightly used (705 miles). It’s just like new. The original owner traded it for a touring/ Limited model. He and his wife wanted something they could tour on.
I have over 500k on reverse trike and am a design engineer so my opinions. Just an FYI that screening will restrict a minimum of 60% air flow. I would remove all the screening and install simple window screen in front of the radiator as that will only restrict 5-8% also the shock adjustment does not stiffen or soften the ride it only changes the ride height. I am well aware of CanAm and specs etc and one of the things of issue is poor tire wear mainly due to over pressure. I know CanAm recommends 28 rear 24 front I would go 20 rear 16 -17 front for best wear plus it will improve handling.
Really good tips thank you, looking to buy a Ryker over the pond in the UK, it’s a bit more difficult buying accessories here as ownership is very limited (I’ve never seen one on the road here!) so it’s even more important to buy the right parts in the first place before shipping to the UK. Thank you for your video and your time sir.
Thanks for watching. I have several newer videos out. The Ryker has been a blast so far. No issues at all.
Appreciate the candid video. Always best to se an honest evaluation.
Looking good! I should have mine this week (fingers crossed).
Nice bro #vincode17
I’m waiting on mines too been waiting since early July 🤦🏾♂️ I got a rally tho
@@jiggarichardson9638 when do you expect to have yours #vincode17
@@VinCode17 they told me no later than mid, end of August
@@jiggarichardson9638 Dame summer will be over by then.
Hey Tow I I…my wife and I have two of these…get the end links and the sway bar…on the interstate…70 75 straight as an arrow…I think they install a squirrel at the factory this completely illuminates that feel. Happy riding
What would that cost to do ??
I'm looking at a gently used Ryker and on the test drive it seems to wiggle back then you adjust while riding then it wiggle back the other direction...I'm used to riding a bike
@@robertsalyers1351 hello Robert…if I recall the sway bar is a couple of hundred or less and if you are somewhat mechanical you can do it yourself. The end links are not much and you would be doing those at the same time. There are several tutorials on you tube. The difference is night and day and really firms up the ride. In my opinion, it is a must. I don’t know why Can-Am does not just install the better sway bar from the factory. have a great day.
@@ROTAX1 very nice, thanks for the reply
the grill plates look great. I bought one that has a clover type pattern on it from Lowes or Home Depot and Installed it on my Scion xB that had a Japanese Body kit and the front bumper was just a wide open mouth. I agree with you on getting something with bigger holes for the intakes too. I was trying to figure out what that thing was on the back of your seat the whole video till you said. I thought it was a police baton lol.
In Europe we have day time running light pods on either side of the body. I believe you can buy them as accessories
We just bought a Ryker for our son and I do not like the radiator being so unprotected. I like the screen you installed on yours. What is that kind of screen called and where can I purchase some of it? Thanks for sharing.
Home Depot. It was on an End Cap by lumber. Around 12 to 15 dollars.
@@TOWIIBRAVO Thanks, I'll buy some for our son's Ryker, And if I ever trade for one I'll buy some for it too. Thanks again.
Thanks for the awesome review!
Hey classmate! Found ya! :) Hope the kitchen situation is OK!
Thanks it’s a process. When you get your Ryker let me know. We can plan a ride.
@@TOWIIBRAVO Working on convincing the wife on an RT Limited or F3 Limited...Won't be until next year at least.
I’m still waiting for that rally bravo it’s mid August I been waiting since early July 🤦🏾♂️ they said I’m 1st on the list BUT time is flying 🤦🏾♂️ I at least want a few rides out of it
Hey T2B, what model Air Hawk seat fits the Ryker? It looks like a great fit
Large cruiser
How did you affix the additional screen protection for the radiator?
Gorilla tape and zip ties.
How much maintenance if you take them the dealership?
I like that screen. Where did you get that? And whats its called?
By any chance are you a TOW missile system guy also?
Yes. 11h ARMY.
27E MOS and Ryker rider also. @@TOWIIBRAVO
Screen looks great
Where’s your cruise control for your ‘22 Ryker?
hello, Are you interested in testing products? We would like to test a cover fo rRyker 900
Man u just solved a problem in the beginning of the video.....u seriously sitting on a great idea!!!
Good video poor to hear on volume on hi but still good !.
Where in Western PA? I'm in Pittsburgh (Carrick).
Less is more..😊
The screen you added reduces airflow by 50%. Nice work.
i was suppose to buy one i talk too three mecanic everyone told me dont touch that jacques to many issue and after 700 klm the fisrt issue i would have to change the brake pads all around for me it a peace of problem the plastic very sheep hard on gaz about 30 mille gallon
Please don't ride with your bright lights on...it's very annoying when you are behind me and your bright light is reflecting into my side mirrors.
That’s the point. I want you to see me.
@@TOWIIBRAVO Wanting to be clearly seen by others drivers is a good thing. I've added extra lights to the front and rear of my motorcycle for that very reason. Just understand that by using your high beam lights that you are also creating a hazard for other drivers. Most states, including PA, have laws requiring you to dim your lights when within 500 feet of another vehicle. So you would need to be constantly turning your high beams on and off to comply. If you don't want to install additional lights, another option is you can install a switched modulator that will flash your headlights during the day to make them more noticeable to other drivers without making them brighter and blinding others.
Boo hoo...LMAO
I have also driven with high beams during daytime, car, or motorcycle so that I'm seen