This worked for me! I bought the replacement screen from ebay and bought the x-acto knife from walmart for $5 and used followed every step of the tutorial im so happy!! thank you!
Yo I can’t believe I did this!! Ordered the parts off of eBay and fixed it myself. Not even Best Buy had hope mine could be fixed but my Apple Watch lives another day!! Thank you!!
Thank you for this tutorial! Quick question, when looking for the replacement screen. Should it be just glass or the one that says LCD display touch screen digitizer replacement? Or if you could even post the link to where you got the original replacement from? I’m just worried that the one that I buy won’t sit nice and even and flush on the casing if it’s not an original
The edge of one of the two clips on the Taptic Engine cable is slightly damaged in the top left corner. Do you think the whole cable needs to be replaced for it to succeed?
Do you have to replace the whole screen versus just replacing the outter glass part? My iwatch still works fine, but just the glass is cracked. Is that possible?
01:57 “now let’s just cut the Force Touch sensor” And suddenly you cannot do a lot of things on your Apple Watch... How can you customize the watch faces if the hard-press is not recognized?!... clueless!
ughh , i should've looked up a tutorial a longgg time ago ! my apple watch is good but yep the screen is cracked so i feel like i cant do it but i need the screen lol but yeah very clear instructions .
I have a 38mm Series 1 that the battery got swollen, and popped off the Screen. I replaced the battery and by the time I opened and closed so many times, the two cables broke, making the screen useless. So I bought another locally. When I plugged the two cables in, I remember the touch screen working and then I powered down, to put the cover on the two cables that plug in. From then on, the watch will turn on, and show face, and by hitting the crown it will give the number pad for password, but nothing works on the touch. Cant enter the password, or slide screen up down, or sideways. No touch at all. Thought it was a bad screen, so got another, replaced by location I purchased and have the same issue. Charges and then starts up, but no TOUCH control. Even went thru that snake battery thing where it won't charge, and start, and would get hot, etc... so discharged for 2 days, and then charged now dealing with the no response to touch for password, and screen at all., Any idea? Cant try old Screen as cables were brittle and broke
I replaced my Apple Watch series 3 gps cracked screen with another screen from another watch same type but the touch isn’t working the only touch that works is when you touch the screen to wake it up . I reset it same no changes . Is the screen only programmed to that watch only ?
Thank you I like the use of different tools if not got the exact one very helpful gotta fix coming up I bought a iwatch but got rip off so I bought a cheap one off eBay cracked screen but pretty good condition around bezel any way I gonna use the iCloud block one screen a put it on the other brand new again and got extra charger and straps replacement battery for £40 . So I feel much better watching this.Thanks
Najam Ashrafi you probably have a force touch sensor broken/cut. It’s a thin tape like film that sits right around where the screen is attached to the frame
Nobody tells people when you buy just the digitizer it is not programmed. What I do hun is go on eBay and buy an iCloud locked watch and use that whole screen replacement with everything on so it’s just the connectors you have to put in n good to go. It is a hit n miss rather touch will work. Idk why. I bough 5 iCloud locked watches and 2 out the 5 had no touch when put on. Weird Ik but you will be able to fix your watch doing my way. Promise.
Hi! I wanna get this fixit done...but the apple care is saying for replacement...why do I pay16000 for just a screen broken..Where can it be done?Kindly inform me soon as possible or your contact if I can get that???????
gurpreet gikki There is a few options here: you can do it the way it's done in the video, using adhesive strips. You can buy precut adhesive online. I would not recommend using glue, because it's really hard to control the amount you are applying and it can be messy. Plus, if you need to take the watch apart later on it can be a bit more complicated because of the glue. Thank you
Can you please clarify which part to search for on Ebay? There is a Black Front Glass Touch Screen Digitizer Replacement and there is the LCD screen. I saw some videos where they keep the back panel and peel/ scrape off the crack glass. I don't want to get the wrong item. What's the range of cost for this item?
Do not waste your money trying to fix just the glass hun. These people don’t inform you that when you buy just the glass you won’t get touch cuz it’s not programmed hun. What you should do on eBay is buy an iCloud locked watch;) take that screen n put it on yours. I do this all the time. Even these sometimes have no touch. 2 out 5 iCloud watches I bought one time had no touch once I transferred the screen. But it is possible you get it on the first one:)
if i damaged the pop connectors trying to get the metal bracket off (nearly impossible) can i replace them? if my lcd was working despite shattered glass--how to separate the two?
separating the screen from the lcd is not the easiest job. and then gluing the new glass and make it look perfect is even more challenging. we dont do that
I bought a new battery and replaced in my series 1 watch and cracked the original screen taking it off to change battery so I ordered new screen and actually broke it trying to get it to work. I have done everything from putting new screen on with new battery to using original battery and screen to try and get it to turn on but it will not come on. any thoughts?
Not sure what could have gone wrong..maybe the ribbon that you connect the screen to got ripped. Sometimes the new batteries are no good. But you said you tried the original battery
where are you from ? i have a 42mm series 2 apple watch with a cracked screen , will you be able to replace the screen ? if yes , then do let me know about the charges & the procedure ..
Egor B, yes you need to remove the paper that covers one side of the adhesive. You can find a proper precut adhesive on ebay. Those were not available when the video was shot. Thank you
I bought one ( 2mm ) but I have to wait like 2-3 weeks for it, and I have the new glass screen, so... Its possible to do it without the paper ? Like with some kind of glue ... Or the best option is just wait for the paper ?
Dipper964 well, I️t is series 1, so I️ts only water resistant initially. Not water proof. But I️ would not recommend going into water after this repair. Thank you
Ashton Steudlein the first gen Apple Watch is not water proof it's water resistant. But I would be careful with that, even if you use the proper precut adhesive. Thank you
I have two things to point out, this voids your warranty and the watch is not waterproof anymore, because of wrong adhesive. Also, many times the replacement screens don’t have 3D Touch, unless they are original
DatJohnnyVasvas first point, if the screen is broken, your warranty is done anyways, unless you have Apple care. The second one is somewhat right, although The Watch is not waterproof to begin with. It’s the first gen and these are only water resistant. So they are not made to be submerged under water. The third point is only true if you rip the 3D Touch sensor, which is right under the screen adhesive. You have to be careful when you remove the old adhesive, because that sensor is only a tiny flex/ribbon that goes around the perimeter. Thank you for your input
sheep bro ^^ nobody gets that your warranty is void if broken. i run a repair shop as well...roll with the punches! and NO DEVICE is waterproof. If they were, why wouldn't the companies give you a new one if you water damaged it?!?!?!
Awesome Video! About to attempt this repair on a 38mm Series 1 Apple Watch. Other than screen size, does the repair differ any with a 38mm vs. a 42mm? Thanks in advance!
Hayden Poff thank you. The process is the same. The only thing you have to be careful with is the adhesive that holds it down. Because apparently there is a pressure sensor stuck right under it. It looks just like a strip of adhesive, but it is actually a part that is extremely easy to cut. Google "Apple Watch pressure sensor", and you'll see how it looks. Thanks again, and good luck
+Arush Mahajan the logic board and a battery.. Or do you mean if you scrape the cracked glass off of the screen? Then you’d have an lcd that shows an image, but you would not be able to navigate it. I hope I answered the question.
Well, water resistant is not waterproof to begin with. So the watch can not be submerged to begin with. But after the repair keep it away from water, for sure
Hi! Can you check this img? imgur.com/a/JJN6SSI .Do you think screen is broken or i just broke the flex (it doesn't have any scracht) while taking off? This happened while mounting again the broken screen as I did not get yet the new one. Thanks!
yes, you have to be careful because the 3d touch sensor part is right under the adhesive of the screen and it can easily be confused with tape. please, pay attention to that. thank you
But a $8 heat gun on eBay. Ik the frustration your having trust me but you become a pro once you get it down but the watch should be so hot that you need a cloth to hold it hun:) then the razor you don’t want to push down a lot but want to go at a slant and wiggle right to left. You will hear a popping sound when I’ve hit the ledge that’s a good sign. Slowly keep doin it and you will start to c the razor going in. From there don’t put the razor too far in and try to look in a make sure you don’t c a black strip coming up. If you do don’t cut that try to put that part back down and go along the edges:) you’ll get it:)
DON’T EVER buy the IFIXIT screen replacement. They are trash and lack greatly in quality(colors are not sharp, unresponsive) I suggest buying an original apple screen from an old Apple Watch on ebay(runs about 40 dollars). This way you’ll have your equipment back to original quality. I’ve used ifixit 5 times and I always regret my purchase.
1:58 LOL he is cutting the Force Touch flexcable without batting an eyelash. 😂 .... and didnt even noticed it. installed nee Display without Force Touch. 👍😵
Terrible video not explaining correctly everything you do plus nobody can see if you don’t zoom enough to be able to see the moves you do, also we don’t open from the side you open the watch screen plus there is a tool that is warming up the screen on 165 degrees, I can go on and on with mistakes you are doing, so let’s leave it at this
Thanks I am 13 years of age and I replaced the screen of my dads Apple Watch with no hassle. Great video with clear instructions
ammar ahmad very good! Thank you
ammar ahmad s
g
ammar ahmad g
Urs u
This worked for me! I bought the replacement screen from ebay and bought the x-acto knife from walmart for $5 and used followed every step of the tutorial im so happy!! thank you!
Thanks for this tutorial, my hubby was able to fix my iwatch with no problem!
Kristina Matskevich thank you
where did you get the replacement screen from
have not broken my watch yet - knock on wood - good to see it can be fixed! cheers!
Yo I can’t believe I did this!! Ordered the parts off of eBay and fixed it myself. Not even Best Buy had hope mine could be fixed but my Apple Watch lives another day!! Thank you!!
Thank you for this tutorial! Quick question, when looking for the replacement screen. Should it be just glass or the one that says LCD display touch screen digitizer replacement? Or if you could even post the link to where you got the original replacement from? I’m just worried that the one that I buy won’t sit nice and even and flush on the casing if it’s not an original
Buy the full touch screen + lcd assembly of the right size (38 or 42 mm). Thank you
From where i can buy the screen? And your tutorial is awesome
Do you recommend any websites to get the stuff for this
Will this work with the series 1 38 mm
The edge of one of the two clips on the Taptic Engine cable is slightly damaged in the top left corner. Do you think the whole cable needs to be replaced for it to succeed?
Where can i buy this screen? need it so much!!
Do you have to replace the whole screen versus just replacing the outter glass part? My iwatch still works fine, but just the glass is cracked. Is that possible?
Yes but it’s very difficult with a high risk of failure
01:57 “now let’s just cut the Force Touch sensor” And suddenly you cannot do a lot of things on your Apple Watch... How can you customize the watch faces if the hard-press is not recognized?!... clueless!
that was definitely adhesive. not a connection.... clueless
Do you have a link to purchase the original 42 mm screen replacement. Thanks for the great video !!!!
You can find different suppliers on Ebay.
ughh , i should've looked up a tutorial a longgg time ago ! my apple watch is good but yep the screen is cracked so i feel like i cant do it but i need the screen lol but yeah very clear instructions .
where did you get you. apple watch replacement screen from
Hello thanks for video. One question where is the best place to order the glass and tool kit?
We buy those on eBay. Thank you
Can i use glue T-7000 ? Force touch sensor will be work?
Please, send the link or the Page to buy of the original screen replacement, thanks!!
This tutorial works for Apple Watch series 0/series 7000?
Used this tutorial as primary and ifixit as secondary. Very useful, thanks.
Thank you
I have a 38mm Series 1 that the battery got swollen, and popped off the Screen. I replaced the battery and by the time I opened and closed so many times, the two cables broke, making the screen useless. So I bought another locally. When I plugged the two cables in, I remember the touch screen working and then I powered down, to put the cover on the two cables that plug in. From then on, the watch will turn on, and show face, and by hitting the crown it will give the number pad for password, but nothing works on the touch. Cant enter the password, or slide screen up down, or sideways. No touch at all. Thought it was a bad screen, so got another, replaced by location I purchased and have the same issue. Charges and then starts up, but no TOUCH control. Even went thru that snake battery thing where it won't charge, and start, and would get hot, etc... so discharged for 2 days, and then charged now dealing with the no response to touch for password, and screen at all., Any idea? Cant try old Screen as cables were brittle and broke
I replaced my Apple Watch series 3 gps cracked screen with another screen from another watch same type but the touch isn’t working the only touch that works is when you touch the screen to wake it up . I reset it same no changes . Is the screen only programmed to that watch only ?
Thank you I like the use of different tools if not got the exact one very helpful gotta fix coming up I bought a iwatch but got rip off so I bought a cheap one off eBay cracked screen but pretty good condition around bezel any way I gonna use the iCloud block one screen a put it on the other brand new again and got extra charger and straps replacement battery for £40 . So I feel much better watching this.Thanks
Thank you
Is the 3M adhesive supposed to be sticky on both sides or just one side?
My apple Watch series 1 is not working force touch. What should i do ?
Please guide me.
Najam Ashrafi you probably have a force touch sensor broken/cut. It’s a thin tape like film that sits right around where the screen is attached to the frame
Nobody tells people when you buy just the digitizer it is not programmed. What I do hun is go on eBay and buy an iCloud locked watch and use that whole screen replacement with everything on so it’s just the connectors you have to put in n good to go. It is a hit n miss rather touch will work. Idk why. I bough 5 iCloud locked watches and 2 out the 5 had no touch when put on. Weird Ik but you will be able to fix your watch doing my way. Promise.
i totally broke my apple watch now :’)
U must be fucked urself 😅
easiest video I've seen of apple watch repair
Do you have a reputable source for digitizers? It seems like a gamble from every place I’ve seen
Where do you get a screen from?
Hi! I wanna get this fixit done...but the apple care is saying for replacement...why do I pay16000 for just a screen broken..Where can it be done?Kindly inform me soon as possible or your contact if I can get that???????
Are the 1st gen and series 1 screens different? in other words, can i take a series 1 screen and put it on my 1st gen watch?
vvelazquez13 as far as I understand that is the same thing
Sir, I'm living in Dubai
Could you please tell me from where i get the repair
gurpreet gikki
hard to say..try looking for a local shop. Or get a replacement part form eBay and do it yourself. Thank you
Fix Apple Now thanks sir
Fix Apple Now and what about the glue ?
gurpreet gikki
There is a few options here: you can do it the way it's done in the video, using adhesive strips. You can buy precut adhesive online. I would not recommend using glue, because it's really hard to control the amount you are applying and it can be messy. Plus, if you need to take the watch apart later on it can be a bit more complicated because of the glue. Thank you
Fix Apple Now thanks sir really appreciate
hello. what temperature do you recommend? i need to remove a working screen. i use a micro soldering heat gun. thx
It depends, try at lower setting
I can adjust temperature from 100c to 420c. What temperature do you use?
Water proof?
What is the battery capacity on series 1 42mm?thanks
Do you use a heat gun or a regular hairdryer to heat the adhesive?
Ben Edwards we use heatgun. Thank you
What about the brightness of the screen after repair
Sunny Bhochhibhoya if you get an original, or good quality screen then there should be no problem with the brightness
Can you please clarify which part to search for on Ebay? There is a Black Front Glass Touch Screen Digitizer Replacement and there is the LCD screen. I saw some videos where they keep the back panel and peel/ scrape off the crack glass. I don't want to get the wrong item. What's the range of cost for this item?
Do not waste your money trying to fix just the glass hun. These people don’t inform you that when you buy just the glass you won’t get touch cuz it’s not programmed hun. What you should do on eBay is buy an iCloud locked watch;) take that screen n put it on yours. I do this all the time. Even these sometimes have no touch. 2 out 5 iCloud watches I bought one time had no touch once I transferred the screen. But it is possible you get it on the first one:)
sorry for late response. you need the full lcd+glass+touch screen assembly for this repair
Where did you buy the screen?
Do you have a page or something where I could send my watch in?
do u actually have to go to apple and replace the screen or is it fixable at home ?
Você tem o display do apple watch serie 2 ? qual valor? manda para o Brasil?
sorry we dont do the series 2 yet. the parts are very expensive
Is there a click while applying the screen back? Basically my question is do I really need the adhesive glue or can I just click it back on?
adhesive is necessary
if i damaged the pop connectors trying to get the metal bracket off (nearly impossible) can i replace them? if my lcd was working despite shattered glass--how to separate the two?
separating the screen from the lcd is not the easiest job. and then gluing the new glass and make it look perfect is even more challenging. we dont do that
I bought a new battery and replaced in my series 1 watch and cracked the original screen taking it off to change battery so I ordered new screen and actually broke it trying to get it to work. I have done everything from putting new screen on with new battery to using original battery and screen to try and get it to turn on but it will not come on. any thoughts?
Not sure what could have gone wrong..maybe the ribbon that you connect the screen to got ripped. Sometimes the new batteries are no good. But you said you tried the original battery
how much would you charge to take a look at it? if you think you might could fix it
??
What’s happens if you replace the screen and now you see snow on the screen?
Hola! Sabes como reparar o cambiar la pantalla rota de un smartwatch michael kors ? Por faaaa
where are you from ?
i have a 42mm series 2 apple watch with a cracked screen , will you be able to replace the screen ? if yes , then do let me know about the charges & the procedure ..
We are in south Florida. Currently working on 1 gen watches only. It’s $120. Thank you
It works thank you😀😀😀😀
The paper strokes part is really necessary ? I didn't understand that because at the end you just remove the paper like nothing happened .
Egor B, yes you need to remove the paper that covers one side of the adhesive. You can find a proper precut adhesive on ebay. Those were not available when the video was shot. Thank you
I bought one ( 2mm ) but I have to wait like 2-3 weeks for it, and I have the new glass screen, so... Its possible to do it without the paper ? Like with some kind of glue ... Or the best option is just wait for the paper ?
Egor B
yes, I'd recommend to wait for a proper adhesive
Does this work for series 3 as well?
Very similar
I forgot to put back in the metal brackets, do you think this is a problem? Will the connectors separate or is this unlikely?
BotRaid I think it should be fine
Where can i get the screen assembly?
eBay
Is there a lcd screen replacement for apple watch series 3 already?
Juvenell Tagaban not sure, check on eBay
Will an Apple Watch still be waterproof even after changing the screen?
Dipper964 well, I️t is series 1, so I️ts only water resistant initially. Not water proof. But I️ would not recommend going into water after this repair. Thank you
Where to buy the screen replacement?
We got ours on ebay
Cannot find watch screen and adhesive on fixapplenow
Kyra Lowe try looking on eBay
He could of send A link to the the new screen he bought
I mean because of the glass held down by the tape is the watch still able to go under water
Ashton Steudlein
the first gen Apple Watch is not water proof it's water resistant. But I would be careful with that, even if you use the proper precut adhesive. Thank you
Fix Apple Now thanks and also is it still water resistant after there being a new screen on it
Ashton Steudlein
it should be , but since it was opened, there really is no 100% guarantee. Thank you
Fix Apple Now Thank You
Fix Apple Now also when i search for a new screen it says digitizer are they both the same
Can u fix my watch
I have two things to point out, this voids your warranty and the watch is not waterproof anymore, because of wrong adhesive. Also, many times the replacement screens don’t have 3D Touch, unless they are original
DatJohnnyVasvas first point, if the screen is broken, your warranty is done anyways, unless you have Apple care. The second one is somewhat right, although The Watch is not waterproof to begin with. It’s the first gen and these are only water resistant. So they are not made to be submerged under water. The third point is only true if you rip the 3D Touch sensor, which is right under the screen adhesive. You have to be careful when you remove the old adhesive, because that sensor is only a tiny flex/ribbon that goes around the perimeter.
Thank you for your input
sheep bro ^^ nobody gets that your warranty is void if broken. i run a repair shop as well...roll with the punches! and NO DEVICE is waterproof. If they were, why wouldn't the companies give you a new one if you water damaged it?!?!?!
wow, very nice
Do I need adhesive
yes. we recommend getting proper pre-cut adhesive
@@fixapplenow Where can I get the adhesive?
Awesome Video! About to attempt this repair on a 38mm Series 1 Apple Watch. Other than screen size, does the repair differ any with a 38mm vs. a 42mm? Thanks in advance!
Hayden Poff thank you. The process is the same. The only thing you have to be careful with is the adhesive that holds it down. Because apparently there is a pressure sensor stuck right under it. It looks just like a strip of adhesive, but it is actually a part that is extremely easy to cut. Google "Apple Watch pressure sensor", and you'll see how it looks. Thanks again, and good luck
What was the point of the tape please explain?
Glorilys Garcia it’s necessary for the screen to stay attached to the housing
Is a double sided tape. Means it will stick to both surfaces top and bottom
without glass does the screen work ?
Arush Mahajan what do you mean?
Fix Apple Now If the cracked screen is removed then what is underneath it ??
+Arush Mahajan the logic board and a battery..
Or do you mean if you scrape the cracked glass off of the screen? Then you’d have an lcd that shows an image, but you would not be able to navigate it. I hope I answered the question.
Is there any chance that i can send you my apple watch so you can fix the screen? and what will be the price?
Erick Valverde what generation? And screen size?
Series 1 and 42 MM
Erick Valverde right now we can do those for $130. Thank you
3d touch tape not installed 😉
Where can I get the adhesive and screen
jagdeep singh check ebay
Is it still waterproof like that
we haven't tested if its still water resistant, but id be careful with that. thank you
Does that break the LCD?
Beefy Banjo you mean does the LCD gets broken during the repair? No, if you are careful enough. Thank you
Apell wact saya jga rusak, layar ke buka
Would i be able to send you my cracked apple watch to be fixed?
Nick Villano yes, you can send it to us to get fixed. It’s $120 at the moment. Thank you
Fix Apple Now how could i send it/come to u to fix an Apple Watch
what about the water resistance after replace screen???? lol
Well, water resistant is not waterproof to begin with. So the watch can not be submerged to begin with. But after the repair keep it away from water, for sure
Where could I buy a replacement screen?
Erikson Philogene check eBay
Erikson Philogene yeah
Hi! Can you check this img? imgur.com/a/JJN6SSI .Do you think screen is broken or i just broke the flex (it doesn't have any scracht) while taking off? This happened while mounting again the broken screen as I did not get yet the new one. Thanks!
sorry for a late response, i think that lcd is bad and the whole lcd panel needs to be replaced. thank you
3d touch funciona????
yes, you have to be careful because the 3d touch sensor part is right under the adhesive of the screen and it can easily be confused with tape. please, pay attention to that. thank you
Thank you, I'll have it in mind
Thanks
Always turn the watch off before opening the watch
what kind of tape is it ???
+Juan Uguna 3M double-sided tape
but the size of it please
2mm wide
By mistake, some people may take out the force touch sensor, which looks exactly like a double sided tape. I broke mine.. 🙈
Shreyans Jain you’re right. Thanks for the advice
What happens if they whole screen is shattered
Replace the screen with a new one
Help! I cannot get the damn screen off! Ive been using several different razors, heat, everything!
But a $8 heat gun on eBay. Ik the frustration your having trust me but you become a pro once you get it down but the watch should be so hot that you need a cloth to hold it hun:) then the razor you don’t want to push down a lot but want to go at a slant and wiggle right to left. You will hear a popping sound when I’ve hit the ledge that’s a good sign. Slowly keep doin it and you will start to c the razor going in. From there don’t put the razor too far in and try to look in a make sure you don’t c a black strip coming up. If you do don’t cut that try to put that part back down and go along the edges:) you’ll get it:)
Okay jus a heads up nextime...please i mean please power off your device before you take it apart
You trying to cut your fingers off just to get that bracket.
That is true. It was a bit dangerous!!))
DON’T EVER buy the IFIXIT screen replacement. They are trash and lack greatly in quality(colors are not sharp, unresponsive) I suggest buying an original apple screen from an old Apple Watch on ebay(runs about 40 dollars). This way you’ll have your equipment back to original quality. I’ve used ifixit 5 times and I always regret my purchase.
1:58 LOL he is cutting the Force Touch flexcable without batting an eyelash. 😂 .... and didnt even noticed it. installed nee Display without Force Touch. 👍😵
Urs that was just the adhesive
u need to change your title, u didnt do the glass replacement. You did a screen replacement, TY anyway
Terrible video not explaining correctly everything you do plus nobody can see if you don’t zoom enough to be able to see the moves you do, also we don’t open from the side you open the watch screen plus there is a tool that is warming up the screen on 165 degrees, I can go on and on with mistakes you are doing, so let’s leave it at this
Where did you buy the replacement screen?
Where is this screen on ebay? Can you put the ebay link?
Yes!! Donyou know that?
Where do you buy the screen ??
Where did you get the glass?
Where can I get the adhesive and screen of Apple Watch series 3
Chainarong Sombutaksorn I’d check eBay
Where can I buy a screen replacement??????
Where do I buy the glass?
Otávio Andrade Sampaio Otavio check eBay
Where can I purchase the parts?
Ebay