Remember, if you replace the back shell. REMOVE THE MICRO SD CARD. You can snap it if it is still in the Steam Deck when you remove the back. The metal back plate does get hot but it's not bad enough to seriously hurt you. If you leave a finger on long enough, it will get seriously uncomfortable.
I’ve done a full shell replacement making it transparent black. Only took about 4 hours without rushing, mostly pausing the install video and making sure it was done right. Used the Extreme Rate brand and it works well so far. I’d like to get colored buttons soon to make it really pop.
@@YustinJ420 before trying it myself I’ve seen people with zero experience say it took them like 7 hours, and there’s a lot of pausing and checking if you’re being careful. If I were to do it again I could in way less time
Really do not understand the point of slapping a grip on the Steam Deck. Why add more bulk to an already bulky system for something that already has good ergonomics.
I'd recommend against getting the transparent shell. That mod on the backplate will end up lessening your device's lifespan. The thick thermal pad beneath the aluminum plate will end up trapping heat and keep it over some of the components. The pad also blocks the airflow channels on the shield above the heatsink.
I wished there was a controller in active production with great parity with the Steam Deck. I love the 4 back buttons and trackpads so much I find the experience to be worse without them.
It doesn't have the 4 back buttons but have you considered the older Steam Controller? Edit: I believe it had two back buttons sorta like the steam deck (one on either side you can squeeze)
@@hiRyan329329 I have considered the steam controller, but since it’s not in active production I’ll have to go with resellers and I don’t want to deal with that at the moment.
@@hiRyan329329 I keep being tempted, but there only being one joystick kinda throws me off a bit, as I often use both joystick and touchpad depending on the situation
Please be advised that version of the jsaux back plate with the exposed metal plate is not the best option. The metal plate on the back gets incredibly hot, almost too hot to the touch of your fingers hit it. Jsaux makes a update version that works better for cooling. There are also several other transparent backplates that don’t change any function of the cooling of the deck
7:43 WTF, you are the first person I have seen just stupidly laying your deck on the sticks to disassemble it. Why not put it in, I don't know, THE CASE THAT CAME WITH IT to protect it?
Just did my JSAUx back plate and a 2tb SSD upgrade. Real damn easy! They really wanted us to upgrade this device. Back plate took like 7-10 min. SSD took like 2-3 minutes. Making a steam is good usb was easy and painless install
should also throw out replacing the shell will void your warranty as well. If you want to do it, you might want to wait until your official year is up first.
If you could compare, how does the Steam Deck (with and without the Stylth Grip) feel like in comparison to say, any of the 3 options of the SkullnCo grips for the Switch?
Tipp if you want a smaller travel case, you can. Remove the inner layer of the official case to get much smaller case. (Dont know if its only for the oled version)
Honestly just splash out and get the jsaux bundle. It comes with basically everything. A shell for protection+front cover,the back is modular with stuff like a battery holder, fan,etc, case has a built in kick stand, you get a fan attachment that’s more gimiky but is kinda useful, a portable battery, and a hub that’s basically a dock
Got a lot of Stream Deck Accessories videos on my channel including replacing 64gb SSD of my og SD into 1tb, and putting case and transparent back cover on my latest Steam Deck OLED! Check it out if you guys want :)
I have a good feeling the steam deck will live on for a while like the nintendo switch did on the market ' the deck offers more and will ger cheaper' i can see them have apu ans cpu upgrades or something eventually
8 minutes in and this psycho doesn't use the case as a stand when he is opening his deck... I bet he has a pair of sandals that he wears exclusively when it snows.
Not worth it, the deck isn't designed for running at higher resolutions, things might change when FSR3 will be out on more titles but I wouldn't hold my breath.
I have a Nintendo Switch V2 and a Nintendo Switch Lite zacian and zamazenta limited edition. Should I buy a Nintendo Switch OLED or a valve steam deck 2tb?
You repeated the fact that changing the front of the Deck is a lot more involved and you're saving it for a future video 3 to 4 times in this video. I think it's better if you follow some kind of script because your videos kind of feel blabber-y and repetitive and a somewhat waste of time to watch.
Steam deck is kinda cool. Does have alot of accessary's. Third party stuff to make it better. That's cool. Now if it could run all the current games at 4k. I mostly play cs, ut 2k4 - 3 and some fighting games. I do play a few current games. Those are mostly single player. whatever.
@@flashfire4 in 5 to 10 years we will say no problem. A raspberry pi runs doom 3. Back in the day payed a fortune for a computer to run it. MEH. Money spent :p
@@Deltax5 In 5 to 10 years, handhelds will be a lot more powerful, but so will desktops and consoles. Handhelds will always be behind and will never be able to play current AAA games at the best quality. I love my Steam Deck and handhelds in general, but that is just a limitation of the size of the device and the need for components that don't consume a lot of power.
Remember, if you replace the back shell. REMOVE THE MICRO SD CARD. You can snap it if it is still in the Steam Deck when you remove the back. The metal back plate does get hot but it's not bad enough to seriously hurt you. If you leave a finger on long enough, it will get seriously uncomfortable.
Happened to my friend when he installed his 1TB internal drive. RIP all his emulator saved data.
Yep, I lost a 1TB sd card this way
Also, my deck seemed to have bricked my 1TB SanDisk card. Apparently this is a common problem but I didn’t hear anything about it
Thanks for the warning. Il keep that in mind
Did this on my 2ds, RIP
I’ve done a full shell replacement making it transparent black. Only took about 4 hours without rushing, mostly pausing the install video and making sure it was done right. Used the Extreme Rate brand and it works well so far. I’d like to get colored buttons soon to make it really pop.
Only 4 hours
@@YustinJ420 before trying it myself I’ve seen people with zero experience say it took them like 7 hours, and there’s a lot of pausing and checking if you’re being careful. If I were to do it again I could in way less time
Got my OLED used for $450 1TB upgraded SSD. The owner got a Legion Go and used that more so sold me the deck for a good price super happy
Really do not understand the point of slapping a grip on the Steam Deck. Why add more bulk to an already bulky system for something that already has good ergonomics.
You Wana always worry about scratching It?
@@crusadertwo239 I have had my Deck since launch and there is not a scratch on it. Get a quality screen protector, maybe a skin, that's all you need.
As a big hand guy I assure you this is perfect.
@@Gonzo0102 I got some big hands to and I see no use for it with something like a Steam Deck but to each their own.
@@coolioam8137 that's right. I am more comfortable with it.
I'd recommend against getting the transparent shell. That mod on the backplate will end up lessening your device's lifespan. The thick thermal pad beneath the aluminum plate will end up trapping heat and keep it over some of the components. The pad also blocks the airflow channels on the shield above the heatsink.
I'm planning to just tear that crap off conpletely
dont use the thermal pad lmao
I wished there was a controller in active production with great parity with the Steam Deck. I love the 4 back buttons and trackpads so much I find the experience to be worse without them.
It doesn't have the 4 back buttons but have you considered the older Steam Controller?
Edit: I believe it had two back buttons sorta like the steam deck (one on either side you can squeeze)
I really hope this is coming as part of the rumoured Valve hardware announcement.
@@hiRyan329329 I have considered the steam controller, but since it’s not in active production I’ll have to go with resellers and I don’t want to deal with that at the moment.
@@hiRyan329329 I keep being tempted, but there only being one joystick kinda throws me off a bit, as I often use both joystick and touchpad depending on the situation
KEVIN. PERFECT TIMING. 😍😍😍
I’ve been wanting this video and just got a steam deck.
Please be advised that version of the jsaux back plate with the exposed metal plate is not the best option. The metal plate on the back gets incredibly hot, almost too hot to the touch of your fingers hit it. Jsaux makes a update version that works better for cooling. There are also several other transparent backplates that don’t change any function of the cooling of the deck
Can you shout out the transparent ones that doesn't mess with cooling please?
I love that someone ripped off Dbrand.😂😂😂 0:30
I'm going to be getting the bases power bank soon hopefully order it of Amazon
9:03 That transparent purple shell looks amazing! 😍
kevin u put those things for the back buttons upside down ya goose
7:43 WTF, you are the first person I have seen just stupidly laying your deck on the sticks to disassemble it. Why not put it in, I don't know, THE CASE THAT CAME WITH IT to protect it?
Dbrand case rip off. Even the face cover!
Just did my JSAUx back plate and a 2tb SSD upgrade.
Real damn easy! They really wanted us to upgrade this device.
Back plate took like 7-10 min. SSD took like 2-3 minutes. Making a steam is good usb was easy and painless install
should also throw out replacing the shell will void your warranty as well. If you want to do it, you might want to wait until your official year is up first.
If you could compare, how does the Steam Deck (with and without the Stylth Grip) feel like in comparison to say, any of the 3 options of the SkullnCo grips for the Switch?
Tipp if you want a smaller travel case, you can. Remove the inner layer of the official case to get much smaller case. (Dont know if its only for the oled version)
Not just only for the oled, it's only on the 1tb oled you get that case.
When can we have a Kevin / Kinda funny collab ? I think you and Tim Gettys would have interesting and cool conversations.
The staisfeye grip is just a straight copy of dbrands case for the steamdeck just worse cause no kickstand. Surprised you didnt mention this Kevin
Welp I’m glad I stuck with Jsaux Modular case thank you for pointing that out Andre!
I always enjoyed watching Kevin's videos on RUclips
Exactly key word ENJOYED
What kind of screw driver did you say we need ? You said it so fast lol . Thank you for your video !
UYIYE Kickstand Case for Steam Deck. I have 2 different color ways as well as some Skull and Co stick caps for my gulikit sticks.
Honestly just splash out and get the jsaux bundle. It comes with basically everything. A shell for protection+front cover,the back is modular with stuff like a battery holder, fan,etc, case has a built in kick stand, you get a fan attachment that’s more gimiky but is kinda useful, a portable battery, and a hub that’s basically a dock
What case with it work with the satisfye grip
How is the satisfy case now? For example when playing longer time and if heat's up?
I’ve been waiting to see a content creator review the stylth grip. Thank you! Can you speak to the raised joysticks?
Don't try running games off sd card in the hub, load times are longer
Nice Kev!
Got a lot of Stream Deck Accessories videos on my channel including replacing 64gb SSD of my og SD into 1tb, and putting case and transparent back cover on my latest Steam Deck OLED! Check it out if you guys want :)
I have a good feeling the steam deck will live on for a while like the nintendo switch did on the market ' the deck offers more and will ger cheaper' i can see them have apu ans cpu upgrades or something eventually
This dude's videos have film grain, bloom, chromatic aberration, oversaturated colors with low contrast.
It's like all gamers nightmares combined.
the slight slant on the power brick is making me so mad
will the current jsaux shells work for the oled? i want to swap my oled into an atomic purple shell already.
He called a switch at the beginning to troll us right?
… right?
Kevin code doesn’t work anymore for the dock can you help?
Satisfy kinda ripped off the D brand case but that's kinda funny since they also joke often about making rip offs lolol
Basically looks the same 😂
but it fits the valve style dock cord unlike dbrand so massive improvement
We need a satisfy grip for rog ally
It's a knock off of the d-brand killswitch. Dbrand has released this kind of case for the ally
8 minutes in and this psycho doesn't use the case as a stand when he is opening his deck... I bet he has a pair of sandals that he wears exclusively when it snows.
Coupon code doesn't work for the battery bank
Just ordered a 64 gb referb from GameStop, hopefully it works
So how did it go?
Knowing gamestop, Probably dont work anym
The stealth grip its a dbrand knock off.
If the accessory arent boosting and improving performance i dont really im not bout waste money on that
Literally no one asked.
also when you do the upgrade video look at the higher res screen option that is out id like to know what you think of it
Not worth it, the deck isn't designed for running at higher resolutions, things might change when FSR3 will be out on more titles but I wouldn't hold my breath.
nice
What about cooling.....u missed one
bro did you say the wrong sponsor name? sounded like basus
Most importantly are headphones! Thank me later!
I have a Nintendo Switch V2 and a Nintendo Switch Lite zacian and zamazenta limited edition. Should I buy a Nintendo Switch OLED or a valve steam deck 2tb?
kool
Time stamps cuh?
Tech20 and Kevin Discount codes dont work
same issue
love the shirt I have the same one lol
Wow, Satisfye really went and straight up copied Dbrand.
I read it, Bent Steam Deck 🤣
Satisfye is _overpriced AF_ asking $50+ for that.
Jeez man still wearing a beanie to hide balding ! Get confident man this is just funny 😂
I would be ashamed of my baldness as well if I looked like that 😂
You repeated the fact that changing the front of the Deck is a lot more involved and you're saving it for a future video 3 to 4 times in this video.
I think it's better if you follow some kind of script because your videos kind of feel blabber-y and repetitive and a somewhat waste of time to watch.
This guy talks way too fast.
Steam deck is kinda cool.
Does have alot of accessary's. Third party stuff to make it better. That's cool.
Now if it could run all the current games at 4k.
I mostly play cs, ut 2k4 - 3 and some fighting games.
I do play a few current games. Those are mostly single player. whatever.
Lol there is no way a handheld could play current AAA games at 4K. Those are ridiculous expectations.
@@flashfire4 in 5 to 10 years we will say no problem.
A raspberry pi runs doom 3. Back in the day payed a fortune for a computer to run it. MEH.
Money spent :p
@@Deltax5 In 5 to 10 years, handhelds will be a lot more powerful, but so will desktops and consoles. Handhelds will always be behind and will never be able to play current AAA games at the best quality. I love my Steam Deck and handhelds in general, but that is just a limitation of the size of the device and the need for components that don't consume a lot of power.
obaamna