Thank you for the simple explanation. What about the problem of the gearbox refusing to move from the N position due to the car breaking down and being taken to a workshop?
My 08 bmw x5 show transmission malfunction. Once I start the car it refuses to shift to drive it jump to park. It does the same thing when I put the car in reverse it jump into park.. it does it repeatedly for a whole and then it will go into drive... some how it drive normal for a little while then the transmission doesn't shift into the right gear sometime and it show transmission malfunction. So plz tell me what it's the problem and how to fix them
So if my car doesn’t accelerate like when I step in gas it doesn’t have that much power is that the problem too? The car goes but it makes some sound and it doesn’t go according to the power of you stepping in the gas. My is a BMW X5 2002 3.0i please help.
2013 528i xdrive, front bumber collision. Engine runs, wont shit from p to n or drive or reverse. A transmission cooler one line is broke. Planning to replace and next step will be to check transmission fluid level. Assuming if line broken maybe lost some fluid...
I have a e65 05' 745i and having exact same problem. Do u believe this will fix it and going ahead and changing the trans sylinoids an pan w/ trans fluid??? Do u think my problems will fix my car??? Other than that the engine runs great, only 108k
Hi i am bought in salvage auction Australia BMW 740 i E 65 2007 model 160.000 km original all service ,but automatic hard shifting ,what to do first ?Last time automatic service do on 97.000 km ,thanks.
great video! But my issue is a little bit different :( my 2013 X5 3.0L is slipping when I try to go in every single stop seems like GEARSHIFT 6 to X and have the code 4E9F and 4E70 and the transmission shop told me that I need a new trans !! with only 125k mi any recommendations ?
I have an issue with my 2015 BMW X5 xdrive 35i that the reverse power is very weak that it could not go up the curb, height 150mm, though I floor the accelerator whereas my RR Sport same 3.0 used 20% of the accelerator…could you please advise what should i look for?
I have a 2011 4.4l x5 50idrive I removed the transmission pan and the mechatronic but there was not a valve body adapter inside could there be a different transmission
Hi, I have 2004 X5 e53 It doesn't engage into Drive from Parking...I put in Manual Mode into 1st gear, then switch it back to Auto mode, then it works....could this be the same problem?
Thanks for the video my friend. My question is what would cause my BMW to just stop going forward and reverse, it runs fine but this happened all of a sudden... hope you can help.
I bought BMW E 65 740 i 2007 original 160.000 km all service last service automatic on 97.000 km ,but hard shiftin gear do you nead replace seal like this video .
Is this Chat still active? I need advice, I have a 2012 E71 (X6) 35i and it won’t go into park (P) The gears all work well but the Park will not engage, I get a Transmission malfunction in P and it goes to N Neutral and flashes. To park I have to engage the E-brake. Any advice?
Hey man, my problem is in the morning (cold engine) it doesn't want to go into drive no problems into reverse. Do you think it could be the same issue? No errors on the dashboard. Tnx
Hello, I have a E53 BMW X5 from 2000. 4.4 V8 The transmission works fine in D But when I switch to revers is spinning a little and I have to accelerate harder to move the car in reverse, May am transmission fluid change solve the issue ?
Hello, did you figure out what is going on with your X5? I’m having the same issue with my X5. It will drive perfect in drive but doesn’t want to move in reverse.
Problem if you take it to a shop they going to say that you need to rebuild your trasmision. Yes is not a big job for someone that knows how to work on cars and have tools.
2010 x5 chugging when driving after acceleration, could this be a symptom? Also the cheap plastic gear wore causing the transfer to malfunction, probably not related, don’t know, spent about $10k on it in last 4 years, other problem related, thanks!
I have a question. My 2004 325Xi will loose power at about 2k rps and sometimes it won’t shift. Also have my tranny light on and it won’t go into sports mode sometimes. Shifter solenoid?
Can low oil lvl in the gearbox cause overheating the oil ? My zf 8hp is at 100-110c and i lose torque when it reach those temperatures. What can be the broblem ?
@@abdulkadirmutlu1799 @abdulkadirmutlu1799 Hi i replaced only the spark plugs and it completely went away for a month, after a month it again started maybe once twice a week jerking a little when car downshifting 2nd to 1st - when slowly coming to a stop. Two months later it hasnt gone worse.
I have a 2011 BMW X3, and it won’t go forward and reverse, sometimes it does. My front differential seems ok and the transfer case. Do you think I’m having the same issue. Although one of my front passenger side axles is wobbly and it would make a grinding noise.
May I know your model or vin number for me to check if the valve body adapter is compatible with my X5? I need to know before I buy the valve body adapter on ebay
All three that I replaced were 2007 and 2008 3.0L engine. Please check with the BMW dealer. They will give you right part number based on you VIN number.
@@reallifevideos192 My X5 E70 is Xdrive3.0D. Is it the same as your car? Dealership only recommends getting new gearbox and it is simply expensive. Even when I gave them the part number of valve body adapter like you share in this video, they told me it is not compatible with my car. It has been two months since the car broke down and no mechanic is willing to take the job replacing the valve body adapter.
Hello everyone, my wife's 2015 x3 28d had a drive-train malfunction last Saturday. She came of the hwy and as she was turning right the car jerked twice and then lost power. She pulled over and shut it off. Waited 5 minutes and restarted it. Motor was fine but she could not select gears just stayed in park. Now it got towed to Kingston BMW and they diagnosed it as it needs a new transmission at 15k plus 2500 labour and taxes on top of that. Now the car has never showed any transmission problems until that day. I tried to find out from the service manager to see what part of the trans is faulty but he refused to tell me or they do not know what exactly the problem is. I also requested that he sends me the diag results which i just got today after complaining to BMW Canada about the situation. I suggested there must be another option because i do not have 20k to spend. I bought the car last year in January with 136k kms for 20k and in August the egr cooler caught on fire and the car was at Otto's BMW in Ottawa for the whole month of August. Which they had to replace the whole top-end of the motor because of the damage from the fire. Which BMW covered 100%. Now 8 months later the trans goes out. I kept on asking the service manager to see if there is another option like replacing the part that's faulty or rebuilding it. He just kept on saying the test says the trans have to be replaced with a new one. He also mentioned that they cannot code a used trans because i suggested that and he said they tried one last year and they could not code it so they had to put a new mechatronic unit at the customers expense which was 6k. As of today they still did not tell me what exactly is wrong with the transmission. So i finally got the diag results which is 11 pages. Not sure if any of you guys know how to read them. Any help would be great. I cant post the PDF here or maybe reply to this comment if you would be able to help in finding out what could be the issue. I have worked on cars all my life built motors, turbos and worked mostly on manual trans but i have no idea on all the new electronics crap. I ended up towing the car back to the dealership where i bought the car which is not a BMW dealer and they said will have a look and see what they can do. I did buy a 3rd party warranty 48mos or 80k but there is a 3000 dollar claim limit. here is a link to the PDF www.bimmerfest.com/threads/b...#post-13547229 Cheers and thanks for your time Lester.
No it does not need trans, it may just need trans fluid or or the part this guy's talking about, if the car isn't getting enough voltage, may need battery but what I'd do is change trans fluid, pan (check oil) It's BMW dealers job to tell you the worst thing, it's how they make their dirty money. In mean time, put key in but don't start, hold gas pedal to floor for 45-60 secs and it will restart transmission, then start car back up, if that don't work take neg off terminal for few mins to restart computer and then hook it up tight an start car but these are troubleshooting the problems not fixing it, so fix other parts asap so you don't run into more future problems... It may be better to get car in working shape and trading it in. if u got a manual trans u wouldn't come across alot these problems bc only auto on bmw has the transmission failsafe, me myself won't get another auto but I do love bmw's, it's all about maintenance an how well previous owner took care of it.. ppl say they unreliable but I blame it on previous owner neglect
J'ai un problème sur mon bmw x5 xdrive modèle 2010 ,a tout moment sur la route un voyant orange s'allume sous forme de roulement, avec mention BV et la voiture diminue de vitesse ,je coupe le moteur et je roule et chaque fois c'est la même chose, merci de m'éclairer sur ce genre de problème.
My issue was that egr coller was leaking, egr valve stuck and pressure leaks in turbos. Now its working because i got rid of that thing and chenged it to a working Volvo :)
Dears, My vehicle is a 2012 BMW X5 e70 model. Transmission is ZF 8hp70 model. When the vehicle warms up and I am stuck in a traffic jam, it jumps from 1st gear to 2nd gear while doing stop and go. Sometimes the error appears on the screen. When I stop the vehicle and start it again, the error disappears from the screen. However, this happens occasionally when I am stuck in a traffic jam. Is this solution suitable for this problem? Has anyone experienced this?
I have a 2001 x5. My car will Rev but won't go, I turn off and back on and drives fine for short distance, then it acts like it's in neutral while in 3rd. Anyone have the same problem?
Hello I am having a problem with my 2011 BMW X5 e70 50i. All of a sudden the vehicle would not shift into drive or into reverse. If the car sits for awhile it will drive and then it will go back out. I get 11 transmission codes. 1. 4E82 Transmission Ratio Monitoring, clutches B 2. 4E84 Transmission Ratio Monitoring, clutches D 3. 4E87 Transmission Ratio Monitoring clutches A & D 4. 4E91 Transmission Ratio Monitoring, clutches A, B & E 5. 4E9B Transmission Ratio Monitoring, Gearshift 2 to x 6. 4FD0 position specification 7. 4EC9 parking lock 8. 4ECA parking lock 9. 4F35 collision of measures of priority class 2 10. 4EA2 Transmission Ratio Monitoring, all clutches 11. CF32 Operation of gear selector switch LIN, 2h for (EGS_EL, PT-CAN) from (GWS, LIN) Please help it seems that I have the same issue.
Hi i have peoblem in my bmw x5 3.0 diesel 2005 M-sport whith gear box somtimes is losing the speeding and is saying transmission fail safty after have ti stop switchit off and on agen to work no from today is working only in first gear and second gear ic can help me what to do thanks
I have bmw e60 530i 2010 i m facing an issue when whenever i start my car the gear is engage with propeler shaft and the car is getting little jerk after start then its become ok And this happen only when i start after giving gap 5 to 10 minute ‘ if i will start and stop same time then no issue Please let me know if you have solution for it
If your a BMW owner you need a BMW specific scan tool. The Ancel BM700 does all that you’d need for any BMW. **But I’d do a reset of adaptions that easy. Reset all Adaptions. **
I performed the repair my self with all precautions needed. After repair I have done 1800 kms .. my car is doing well and am happy for that . Thanks to AUTODOC. #autodoc
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
This saved me a ton of $ on my 2010 e70 .. I got the kit from fcp euro and solved all my transmission issues
Thank you for the simple explanation. What about the problem of the gearbox refusing to move from the N position due to the car breaking down and being taken to a workshop?
very good. thanks for the video.
And the other 3 mechatronics rubber sealing sleeves.
My 08 bmw x5 show transmission malfunction. Once I start the car it refuses to shift to drive it jump to park. It does the same thing when I put the car in reverse it jump into park.. it does it repeatedly for a whole and then it will go into drive... some how it drive normal for a little while then the transmission doesn't shift into the right gear sometime and it show transmission malfunction. So plz tell me what it's the problem and how to fix them
So if my car doesn’t accelerate like when I step in gas it doesn’t have that much power is that the problem too? The car goes but it makes some sound and it doesn’t go according to the power of you stepping in the gas. My is a BMW X5 2002 3.0i please help.
I have 2008 328i with those symptoms , did you resolve your issue? & if so , could you please help me 🙏🏽
Fcp euro has that in a kit with the wiring seal etc for half that
Do you mind posting the link?
I do not see that part in the ‘BMW GA6HP19Z Automatic Transmission Service Kit - 24152333907KT2’.
Thanks!
2013 528i xdrive, front bumber collision.
Engine runs, wont shit from p to n or drive or reverse.
A transmission cooler one line is broke. Planning to replace and next step will be to check transmission fluid level.
Assuming if line broken maybe lost some fluid...
I have a e65 05' 745i and having exact same problem. Do u believe this will fix it and going ahead and changing the trans sylinoids an pan w/ trans fluid??? Do u think my problems will fix my car??? Other than that the engine runs great, only 108k
Thanks for wonderfull solutions, so many BMW owners will like it, where do you this pan & Valve adapter in Canada !
You can order online, but don't do it yourself. Give it to transmission specialist
What’s that kit called
Hi i am bought in salvage auction Australia BMW 740 i E 65 2007 model 160.000 km original all service ,but automatic hard shifting ,what to do first ?Last time automatic service do on 97.000 km ,thanks.
My e70 2008 does not start. Is it related to the gearbox or not?
I found another video of this man to reset the gear which helped me very much
They say that the seals need to replaced would that be the part you are talking about
great video! But my issue is a little bit different :( my 2013 X5 3.0L is slipping when I try to go in every single stop seems like GEARSHIFT 6 to X and have the code 4E9F and 4E70 and the transmission shop told me that I need a new trans !! with only 125k mi any recommendations ?
Could be your shifting solenoid
now I have a code 4E70 CONVERTER LOCKUP CLUTCH and the same trans malfunction light on @@reallifevideos192
I have an issue with my 2015 BMW X5 xdrive 35i that the reverse power is very weak that it could not go up the curb, height 150mm, though I floor the accelerator whereas my RR Sport same 3.0 used 20% of the accelerator…could you please advise what should i look for?
I have a 2011 4.4l x5 50idrive I removed the transmission pan and the mechatronic but there was not a valve body adapter inside could there be a different transmission
Thank you so much I have the same symptoms on my x5 2008 after ,30 MN of drive it's stops and go to safe mode I will try this part out thank you
Hello man what's up?
Hi, my X5 isn't shifting gear easily sometimes after 80km. Is it same your problem? Could you please suggest something?
Hi, I have 2004 X5 e53
It doesn't engage into Drive from Parking...I put in Manual Mode into 1st gear, then switch it back to Auto mode, then it works....could this be the same problem?
Yes, it could be
@MatthewMcgrath did you ever figure it out? I am having these same issue with the same make and model.
Thanks for the video my friend. My question is what would cause my BMW to just stop going forward and reverse, it runs fine but this happened all of a sudden... hope you can help.
Could be the same issue
What do you do when you replace the seals but still showing malfunction on dash!
Hi my E70 has the same issue . Am gonna try with this . Could you explain the draining and refilling process . Please . I think it’s not a easy task.
I bought BMW E 65 740 i 2007 original 160.000 km all service last service automatic on 97.000 km ,but hard shiftin gear do you nead replace seal like this video .
Have a 650i same exact problem after this process is done is there a way to reset trans computer or it automatically will reset?
Is this Chat still active? I need advice, I have a 2012 E71 (X6) 35i and it won’t go into park (P) The gears all work well but the Park will not engage, I get a Transmission malfunction in P and it goes to N Neutral and flashes. To park I have to engage the E-brake. Any advice?
Hi I have a bmw e70 30d gearbox keeps jumping out of gear 5 or 6 do you know what it could be
I have an 08 z
X5 3.0 it drives great no issues I tried to shift it manual with the stephtronic and it don't work any ideas on this and thank you
Hi my transmission brought me here. I have x5 bmw 07 plate transmission faulty. It won’t go into gear but you can see the rev. Please help?
Hi. Could be the same issue
my 2010 bmw 528 1 shifting very hard after
toweing , can u give me a reason why ?
thanks
My bmw 328i is coming tramition problems on the das and won’t start please tell me one possible problem
I have 2011 x5 e70 40D need to change my servo actuator can you show me where it's located please
Would this help on a 2004 BMW X5 3.0 has a hard downshift from 2 to first gear drives perfect besides that
I think so
Hey man, my problem is in the morning (cold engine) it doesn't want to go into drive no problems into reverse. Do you think it could be the same issue? No errors on the dashboard. Tnx
It could be. Check the gearbox oil level too
Hello,
I have a E53 BMW X5 from 2000.
4.4 V8
The transmission works fine in D
But when I switch to revers is spinning a little and I have to accelerate harder to move the car in reverse,
May am transmission fluid change solve the issue ?
Hello, did you figure out what is going on with your X5? I’m having the same issue with my X5. It will drive perfect in drive but doesn’t want to move in reverse.
Problem if you take it to a shop they going to say that you need to rebuild your trasmision. Yes is not a big job for someone that knows how to work on cars and have tools.
So buy the part and pay the to change it out. Simple. You tell the mechanic what you want done and its done
2010 x5 chugging when driving after acceleration, could this be a symptom? Also the cheap plastic gear wore causing the transfer to malfunction, probably not related, don’t know, spent about $10k on it in last 4 years, other problem related, thanks!
Hi. Does is shift properly?
Yes, but when accelerating, does seem to chug
More then 5 people have asked this =BUT NO ANSWER!!! My 2008 X5 3.0 is having these symptoms. Will this fix work for a 3.0 or only the 4.8L?
I had two 3.0L with the same issue and both have been fixed with this.
I have a question. My 2004 325Xi will loose power at about 2k rps and sometimes it won’t shift. Also have my tranny light on and it won’t go into sports mode sometimes. Shifter solenoid?
Shifter solenoid is the most suspected part. Have you tried to read the code?
It has no power.Same problem? Where can I get that part and what is it called?
Can low oil lvl in the gearbox cause overheating the oil ? My zf 8hp is at 100-110c and i lose torque when it reach those temperatures. What can be the broblem ?
Hi. 2016 bmw x5 f15 jerks when car accelerates. I don’t see any leaks. Do you have any suggestions? Thank you.
Hi
Did you solve your problem?
Hey i have a question about serie 7 2009 transmission is working good but when i try to select parking change to N do u have any idea what's going on?
My 1015, X5 xdrive35i is starting to shift a little hard as it shifts on normal driving. Does this fix on the video fix this situation?
Hey did you fix your car and how? My car is hard shifting between 2nd and 1st, very annoying.
@@netonentchev hi, do you have any updates? I have similar issue.
@@abdulkadirmutlu1799 @abdulkadirmutlu1799 Hi i replaced only the spark plugs and it completely went away for a month, after a month it again started maybe once twice a week jerking a little when car downshifting 2nd to 1st - when slowly coming to a stop. Two months later it hasnt gone worse.
My 2009 bmw X5 doesn't want to move when and if it does it runs like crap but when it warms up it runs good
The 8 speed cost 8 grand built for performance. You just have to buy it from the ram guys. Don't worry they are exactly the same
I have a 2011 BMW X3, and it won’t go forward and reverse, sometimes it does. My front differential seems ok and the transfer case. Do you think I’m having the same issue. Although one of my front passenger side axles is wobbly and it would make a grinding noise.
It could be the same issue with shifting
Hello I wish you can help me here I have a BMW X5 but if I can contact you about it and help me out because I don’t know what is the problem
My 2008 X5 3.0 is having these symptoms. Will this fix work for a 3.0 or only the 4.8L?
May I know your model or vin number for me to check if the valve body adapter is compatible with my X5? I need to know before I buy the valve body adapter on ebay
All three that I replaced were 2007 and 2008 3.0L engine. Please check with the BMW dealer. They will give you right part number based on you VIN number.
@@reallifevideos192 My X5 E70 is Xdrive3.0D. Is it the same as your car? Dealership only recommends getting new gearbox and it is simply expensive. Even when I gave them the part number of valve body adapter like you share in this video, they told me it is not compatible with my car. It has been two months since the car broke down and no mechanic is willing to take the job replacing the valve body adapter.
Hello everyone, my wife's 2015 x3 28d had a drive-train malfunction last
Saturday. She came of the hwy and as she was turning right the car
jerked twice and then lost power. She pulled over and shut it off.
Waited 5 minutes and restarted it. Motor was fine but she could not
select gears just stayed in park. Now it got towed to Kingston BMW and
they diagnosed it as it needs a new transmission at 15k plus 2500 labour
and taxes on top of that.
Now the car has never showed any transmission problems until that day. I
tried to find out from the service manager to see what part of the
trans is faulty but he refused to tell me or they do not know what
exactly the problem is. I also requested that he sends me the diag
results which i just got today after complaining to BMW Canada about the
situation. I suggested there must be another option because i do not
have 20k to spend. I bought the car last year in January with 136k kms
for 20k and in August the egr cooler caught on fire and the car was at
Otto's BMW in Ottawa for the whole month of August. Which they had to
replace the whole top-end of the motor because of the damage from the
fire. Which BMW covered 100%. Now 8 months later the trans goes out.
I kept on asking the service manager to see if there is another option
like replacing the part that's faulty or rebuilding it. He just kept on
saying the test says the trans have to be replaced with a new one. He
also mentioned that they cannot code a used trans because i suggested
that and he said they tried one last year and they could not code it so
they had to put a new mechatronic unit at the customers expense which
was 6k. As of today they still did not tell me what exactly is wrong
with the transmission. So i finally got the diag results which is 11
pages. Not sure if any of you guys know how to read them.
Any help would be great. I cant post the PDF here or maybe reply to this
comment if you would be able to help in finding out what could be the
issue. I have worked on cars all my life built motors, turbos and
worked mostly on manual trans but i have no idea on all the new
electronics crap. I ended up towing the car back to the dealership
where i bought the car which is not a BMW dealer and they said will
have a look and see what they can do. I did buy a 3rd party warranty
48mos or 80k but there is a 3000 dollar claim limit.
here is a link to the PDF www.bimmerfest.com/threads/b...#post-13547229
Cheers and thanks for your time
Lester.
No it does not need trans, it may just need trans fluid or or the part this guy's talking about, if the car isn't getting enough voltage, may need battery but what I'd do is change trans fluid, pan (check oil) It's BMW dealers job to tell you the worst thing, it's how they make their dirty money. In mean time, put key in but don't start, hold gas pedal to floor for 45-60 secs and it will restart transmission, then start car back up, if that don't work take neg off terminal for few mins to restart computer and then hook it up tight an start car but these are troubleshooting the problems not fixing it, so fix other parts asap so you don't run into more future problems...
It may be better to get car in working shape and trading it in. if u got a manual trans u wouldn't come across alot these problems bc only auto on bmw has the transmission failsafe, me myself won't get another auto but I do love bmw's, it's all about maintenance an how well previous owner took care of it.. ppl say they unreliable but I blame it on previous owner neglect
J'ai un problème sur mon bmw x5 xdrive modèle 2010 ,a tout moment sur la route un voyant orange s'allume sous forme de roulement, avec mention BV et la voiture diminue de vitesse ,je coupe le moteur et je roule et chaque fois c'est la même chose, merci de m'éclairer sur ce genre de problème.
Wuold this be a fix for rough downshifts? Mine does a bang when shifting 6 to 5
That’s sounds like you need solenoid replacement. You can get a set of them FCPEURO OR ECS
Also you can do this service too all together
My issue was that egr coller was leaking, egr valve stuck and pressure leaks in turbos. Now its working because i got rid of that thing and chenged it to a working Volvo :)
Is this on 2004 325i sedan also?
Are you in ontario? Do you want to do this fix for my friends bmw
I can't, sorry. Any transmission specialist can do it for you
My linkage in there is rattling how to fix that please
Is e60 525i xdrive the same ?
and by the way I did the trans service 8mo ago replacing the oil pan and filter too
Can you see the parking pawl if you remove the pan?
Yes you will see the parking pawl because it connects the mechatronics
Dears, My vehicle is a 2012 BMW X5 e70 model. Transmission is ZF 8hp70 model. When the vehicle warms up and I am stuck in a traffic jam, it jumps from 1st gear to 2nd gear while doing stop and go. Sometimes the error appears on the screen. When I stop the vehicle and start it again, the error disappears from the screen. However, this happens occasionally when I am stuck in a traffic jam. Is this solution suitable for this problem? Has anyone experienced this?
How about just when driving 80 km
That part, 24 34 7 588 727, is listed for a E53 E63 E65 not an E70. Are you sure you did this on an E70?
Most E70's has the ZF 8-speed.
You forgot to mention the 4 valve seal sleeves since you got mechatronics/valvebody out
Are all 07-10 x5 zf transmissions?
Good job Boi!!
I'll have to try this on my range rover HSE with 5h91P trans BMW 4.0
Hi good day as my car delayed while I shift in reverse
Hi. Should be the same issue
I have a 2001 x5. My car will Rev but won't go, I turn off and back on and drives fine for short distance, then it acts like it's in neutral while in 3rd. Anyone have the same problem?
Thank you 👍🏽
Hello I am having a problem with my 2011 BMW X5 e70 50i. All of a sudden the vehicle would not shift into drive or into reverse. If the car sits for awhile it will drive and then it will go back out. I get 11 transmission codes.
1. 4E82 Transmission Ratio Monitoring, clutches B
2. 4E84 Transmission Ratio Monitoring, clutches D
3. 4E87 Transmission Ratio Monitoring clutches A & D
4. 4E91 Transmission Ratio Monitoring, clutches A, B & E
5. 4E9B Transmission Ratio Monitoring, Gearshift 2 to x
6. 4FD0 position specification
7. 4EC9 parking lock
8. 4ECA parking lock
9. 4F35 collision of measures of priority class 2
10. 4EA2 Transmission Ratio Monitoring, all clutches
11. CF32 Operation of gear selector switch LIN, 2h for (EGS_EL, PT-CAN) from (GWS, LIN)
Please help it seems that I have the same issue.
لهجه ایرانیت عالیه دوست من،😅
😂😂😂🙌
Hi i have peoblem in my bmw x5 3.0 diesel 2005 M-sport whith gear box somtimes is losing the speeding and is saying transmission fail safty after have ti stop switchit off and on agen to work no from today is working only in first gear and second gear ic can help me what to do thanks
Hi. It could be your shifting solnoid in mechatronics module
I have bmw e60 530i 2010 i m facing an issue when whenever i start my car the gear is engage with propeler shaft and the car is getting little jerk after start then its become ok
And this happen only when i start after giving gap 5 to 10 minute ‘ if i will start and stop same time then no issue
Please let me know if you have solution for it
❤
What transmission is on this car isit zf 6 26
Zf
If your a BMW owner you need a BMW specific scan tool. The Ancel BM700 does all that you’d need for any BMW.
**But I’d do a reset of adaptions that easy. Reset all Adaptions. **
Anyone else have no 4th gear in x5 m?
Hi my E70 has the same issue . Am gonna try with this . Could you explain the draining and refilling process . Please . I think it’s not a easy task.
Hi. I didn't do it myself. Take it to the transmission specialist and explain what you want him to do
I performed the repair my self with all precautions needed. After repair I have done 1800 kms .. my car is doing well and am happy for that . Thanks to AUTODOC. #autodoc
great info thanks