Theo tôi bạn để áp 48v là hơi thấp . sẽ khó mồi hàn và quê cháy không ổn định dễ bị ngắt hồ quang khi đang hàn . những máy hàn thương mại người ta thường cho ra áp 54v đến 60v sẽ dễ mồi que hàn hơn.mình chỉ góp ý mong chiếc máy hoàn thiện hơn chứ không có ý định dìm hàng ,mong bạn đừng hiểu lầm.mình rất ngưỡng mộ kiến thức của bạn và đã đăng ký kênh từ rất lâu rồi . chúc kênh của bạn ngày càng phát triển
Hello. I installed eagle 6.6.0 from you and threw a crack. I just replaced one eagle file with crack eagle. It started and the diagram is only terribly illegible, unfortunately ... I do not understand anything of it and I do not see the value and connections of the elements too much ... it's a pity. Maybe someone has it clearer in pdf or similar? I understand that it is a half or full bridge converter powered from 320V 330uF. What big luck is the minimum needed? How many square mm of core? Maybe you need more luck? Why did you give the steering trafo? Is it impossible to do without it? What IGBTs? The 60A diode did not burn? Unless you put two in parallel. What about the output choke? The choke in the inverter welding machine is very important and the output capacity probably as well.
ok very good as a question how we can adjust the output current ? are we can control out put current with controlling gate current???? for adjustable welding machine. please ans me tnx...
Hình như bạn là người Việt....mà boar này bạn có chia sẻ sơ đồ nguyên ly không ạk,bạn có thể cho mình xin sơ đồ nguyên lý chuẩn boar trong video được k
Mình rút gọn nhiều quá r ấy. ko có bảo vệ quá dòng , chập que, ko có bv quá nhiệt, ko chỉnh dòng vvv. đây là mạch test thôi. Hàn đc que là nóng mạch rồi. Cần phải chỉnh sửa nhiều thì mới ok đc
Hello friend, what kind of driver do you use? Well, I have put several and the SG3525 burns when connected since its windings have a resistance of 1.5 Ohms.
Thanks for this video. I will await the improvements you can make to this circuit. I am very interested, because I would like to build a valid welding machine for hobby use.
Hello sir thank you for your everyday projects good job please can you please send the whole thing to because I tried to download but it couldn't thank you hope to hear from you soon
How is the drive transformer winding. Can you update the details. Coil details core size, turns. Also main transfer secondary coils thickness and total coils.
hi, i need a power supply for 3kV 1A, do you have an idea how to do this with a power swichtchin supply? Or an idea what is the best way eg. building 3 power supplys with 1kV each and put them in series?
friend has the layout scheme of the pcb of the video. the current link scheme is a bit complex and different from the pcb shown in the video. thankful.
Buenas si está dentro de sus posibilidades hazme el favor y envíame el esquema ya que me interesa una máquina de soldar y en esta país son muy cara y no cuento con el dinero para comprarla
Hello. It's a pity that you don't throw the schematic screen next to the movie. There are a lot of interesting projects on your channel, but unfortunately the scheme can be worked on and Eagle is not working for me. Regards.
Only $2 for 5pcs 2 Layer & 4Layer PCBs: jlcpcb.com/cyt
Use promotion code "JLCATH" to get extra $2
Theo tôi bạn để áp 48v là hơi thấp . sẽ khó mồi hàn và quê cháy không ổn định dễ bị ngắt hồ quang khi đang hàn . những máy hàn thương mại người ta thường cho ra áp 54v đến 60v sẽ dễ mồi que hàn hơn.mình chỉ góp ý mong chiếc máy hoàn thiện hơn chứ không có ý định dìm hàng ,mong bạn đừng hiểu lầm.mình rất ngưỡng mộ kiến thức của bạn và đã đăng ký kênh từ rất lâu rồi . chúc kênh của bạn ngày càng phát triển
áp 60V đó b. Mình làm mạch để quảng cáo cho altium thôi. ko có ý định hoàn thiện mạch này đâu :D . trên thị trường đầy mạch này rồi.
Pcb drayer gram sent me plz
Hello brother, how do I get this scheme, thank you
Hello brother, how do I get this scheme, thank you
This is awesome sir you have even made it simplier than the other projects people have made i salute you sir.
Thanks
Post the scheme in pdf. Thanks. Great project.
👍👍. Sau chỉnh lưu nắn lọc là được cái mạch cấp nguồn ngon.
nhiễu lắm , ko ngon đâu
دي الدائره اللي طلبتها منك يا هندسه
Well done. Made, how many amps, how many volts, and whether it is protected or not. Answer my question so I can make it like her
Hello. I installed eagle 6.6.0 from you and threw a crack. I just replaced one eagle file with crack eagle. It started and the diagram is only terribly illegible, unfortunately ... I do not understand anything of it and I do not see the value and connections of the elements too much ... it's a pity. Maybe someone has it clearer in pdf or similar? I understand that it is a half or full bridge converter powered from 320V 330uF. What big luck is the minimum needed? How many square mm of core? Maybe you need more luck? Why did you give the steering trafo? Is it impossible to do without it? What IGBTs? The 60A diode did not burn? Unless you put two in parallel. What about the output choke? The choke in the inverter welding machine is very important and the output capacity probably as well.
Great and awesome update the design and don't forget pcb
ok very good
as a question how we can adjust the output current ?
are we can control out put current with controlling gate current????
for adjustable welding machine.
please ans me
tnx...
Hình như bạn là người Việt....mà boar này bạn có chia sẻ sơ đồ nguyên ly không ạk,bạn có thể cho mình xin sơ đồ nguyên lý chuẩn boar trong video được k
mở file .sch nhé
xem thấy sự edit chuyên nghiệp ,đỉnh ah ơi😍😍
Thực ra người việt mình rất hay. Cái kênh nước ngoài nào lạ lạ cũng của người việt 😂😂😂. "Lập trình C" xin cái sơ đồ mạch với ông
hehe, file ở mô tả đó
@@PhdHung có thể đơn giản hơn không bác. Nhìn cái mạch bác làm đơn giản lắm mà mạch của nga rối quá
Mình rút gọn nhiều quá r ấy. ko có bảo vệ quá dòng , chập que, ko có bv quá nhiệt, ko chỉnh dòng vvv. đây là mạch test thôi. Hàn đc que là nóng mạch rồi. Cần phải chỉnh sửa nhiều thì mới ok đc
Hello friend, what kind of driver do you use? Well, I have put several and the SG3525 burns when connected since its windings have a resistance of 1.5 Ohms.
sir whit is 1k2 capacitor value ??? please replay.
Hello, congratulations for your effort
But
The circuit diagram is error for lm 358 short in pin 4 & pin 8
Awesome machine. Just needs to add a choke coil.
Amigo passa o esquem desta que vc montou aguardo
how many turns has the driver transformer?
50-50-50 trafo EE16 no gap
Thanks for this video. I will await the improvements you can make to this circuit. I am very interested, because I would like to build a valid welding machine for hobby use.
Yes, I will continue to update this project.
@@PhdHung please update the circuit details in English
Well done Maybe electronic circuit You do not set a variable resistor to control the current for welding and cutting
Mohon Ijin untuk membuatnya..🙏
I built one now soon finished
dear Zirconium, Please could you give us more information about
transformer driver ???
The EE16 transformer has no clearance, It has 3 windings. 50-50-50 turns
how many turns has the driver transformer?
I tried with 3 coils of 50 turns but it didn't work
try less then 20 turns
Can this be used for charging 48v lithium battery pack? If not how to modify this circuit
no bro.
Hello gud job 👏👏👍❤️ sir can you make pfc circuit 220v to 400v dc with feedback 😊
ok bro, wait me
TnQ so much sir 👍👍😊😊❤️❤️❤️❤️
Excellent project 👍 I liked it
thanks
How can well see it circult digram?
Very nice 👍👍👍
Could you make 12 volt 200 A
Thnx.
What is a 16 pin integrated? I could not see in the shematic.
Mod áp lên để sạc bình đc ko ad nhỉ
Sạc thì phải thêm linh kiện nữa bạn. thêm CV nữa, cái này mới có CC thôi
Amigo parece que o. Esquema que vc passo😮u não é o mesmo da montagem no video
Hello sir. Can you upgrade this stick welder to tig welder, that will be great thanks.
Người Việt nhưng chơi toàn tiếng anh nên mò mãi ko đc. Chịu thua
hehe
you alaways make a good job
Thanks bro
liệu nó có bền ko ạ
tất nhiên là không rồi. Mạch test nên bỏ qua nhiều thứ mà bạn. chỉnh dòng ko có, quá tải ko có, chống dính que ko có. khởi động mềm ko có.
Hello sir thank you for your everyday projects good job please can you please send the whole thing to because I tried to download but it couldn't thank you hope to hear from you soon
I checked. The link is still fine.
in your diagram file ur using uc3845 but ur project u use sg3525 ic. please send us diagram using sg3525. thank you
Please make it with pulse and hf for tig weld..thanks
ok bro, wait me
sir can i use 60n60FD1 IGBT???
yes, ok bro
Hello, can you make a video about power supply with 220VAC power supply and symmetrical output?
Thanks!
ok bro, wait me next video
I love it
How is the drive transformer winding. Can you update the details. Coil details core size, turns. Also main transfer secondary coils thickness and total coils.
What is inductance of main transformer
disculpa aqui en mi oais tengo una entrada de 127v le cabiaria algun conponente o quedaria asi gracias exelente proyecto...
Sir, please tell me the size of the resistor and the components in the controller block
why don't you try to put a current control?
I m from India🇮🇳🇮🇳
So?
WOW, wonderful project. I follow your news
Thanks bro
hi, i need a power supply for 3kV 1A, do you have an idea how to do this with a power swichtchin supply? Or an idea what is the best way eg. building 3 power supplys with 1kV each and put them in series?
Get your new found sponsor to buy you some decent eye protection,,, this is shocking (pun intended).
hi friend, can you provide schematic via PDF, thank you.
Saya suka klu sesuatu itu bisa kita buat sendiri
Yeh bana howa corcuit board mil sakta hia
its amazing
How u measure and calculate the winding? Can u explain?
can igbt be replaced with mosfet? mosfet 50n60 or replaced with type idgt 40n60/60n60…
ok bro
@@PhdHung sir skema pwm sg3525+lm358
@Hendra
@hendra Z
@@imronzuhri12165 gimana om
Cái đó chỉnh dòng đc ko anh
bản test, ko chỉnh đc b.
@@PhdHung cái đó làm nguồn đc ko anh
Very nice Powersupply
How download schematic ? Please
Your video is top and good
sir what 1k2 capacitor ?????? please replay
are you vietnamese?
Nhìn quyển sách quen quá
Thanks for watching
Good project but How can I change the output current?
Muy bien amigo
Tengo una duda cuanto voltaje obtienes?
The BRD and SCH files cannot be opened, sir.
Thanks is very helpfuly is so amazing and coool
😊amigo me passa o esquema da placa de circuito.
Nice power supply. but my device is not able to open your link.
as always i become sad.
o único projeto desse tipo no RUclips,não encontrei outro.
How to make for current decrease or increase.
friend has the layout scheme of the pcb of the video.
the current link scheme is a bit complex and different from the pcb shown in the video.
thankful.
Ausom. I am also trying to make it
Very helpfu.
cho em xin schematic hoàn thiện được k a
có trong file nén đó b
This project is very good!
Buenas si está dentro de sus posibilidades hazme el favor y envíame el esquema ya que me interesa una máquina de soldar y en esta país son muy cara y no cuento con el dinero para comprarla
Project file in video description. download and open with Winrar on PC.
Kegunaan smps 14 volt buat apa ?
Hello. It's a pity that you don't throw the schematic screen next to the movie. There are a lot of interesting projects on your channel, but unfortunately the scheme can be worked on and Eagle is not working for me. Regards.
www.mediafire.com/file/95uqw2kxb5dkrxe/Eagle.Professional.6.6.0.rar/file
Good tiching karte hai 👍👌👍👍👌
Làm để hàn gia đình chắc ok 👌
bản test thôi b
Hello brother, how do I get this scheme, thank you
open file .sch
Great job!!!
Thanks bro
What is the purpose of toroid ferrite between IC output and driver tranformer?
(I see green small ferrite in video)
because the transformer when working generates a lot of noise. That toroid will remove noise on the signal line.
Could someone tell me the track name (by Kevin McLeod) at 7:00 ? I can't find it with google (spent more than 2 hours)
Can u make triac based transformer arc welding current controller bro
Có video việt ko ah
không có b. Mình lười làm quá.
What is the resistor value of SG3525 IC
Send value
Can this be used for DC power supply
Hola amigo, soy de Colombia, cuántos dólares valdría 20 placas de esas, gracias
How to trun wire for gdt transformer sir ?
Amigo passa o esquema de ligaçao
Hello. Nice work. Please can you send me the schematic. Thanks.
use eagle cad and open file sch
schematic it's not the same you build.
first ever voice i have ever heard
Schematic picture ??
đẳng cấp quá a Hưng ơi
tks b
Đỉnh vậy anh
Yes 👍 🔋⚡🔌💡
Cmt của em đã thành hiện thực 😁
You From vietnam
Thank you for watching
Ap yesa pcb or SMPS bana ke pdf banake de sakte ho to bahut sare kharidne ke liye ap ko odar denge. 10 /20/30/ AMPS TAK BANADO