Hey Chris, I really enjoy your channel and videos. Not only do they provide great ideas and inspiration, but you have such awesome energy and infectious positivity. I'm also a family man working full time and getting my garage shop set up. Thank you for giving us all A GLIMPSE INSIDE!
@@AGlimpseInsidehey man GREAT VIDEO! I have been binging all of the French cleat content. It might just be me, but from 9:44 on, your video doesn’t have sound.
I love that you stopped what you were doing to make time for your daughter and include her. That was awesome and made her feel good. You got a thumbs up just for that.
Chris I love what you do, and certainly jealous of your shop. I’m 64 years old (retired) and I’m in process of building my workshop. Current building is 40’x60’x16’ , in which I am building a 18x30 shop area. I keep coming to your videos for inspiration and guidance. I am an absolute beginner and have a long time to go before I tackle something high end. But with your great content I hope to learn from you while doing the buildout of the shop itself. Thank you for what you do!
I did the same thing for spacing my French cleats on the wall, except I made hangers for spacing and started from the top down. Several reasons for that. One, the floor in my garage is not level, but the ceiling is. So my highest French cleat is 12" _down_ from the ceiling rather than some inches up from the floor, and everything else was indexed off that. Second, I cut 8' long French cleats to go on the wall; hanging them from above rather than balancing them on spacers below meant I didn't have to worry about a precariously balanced 8 foot long plywood noodle falling off the spacers before I could get the screws in. I used bolts for the bottom part of the spacer-hangers: I could fine adjust the height that way, and also back off the bolts to get the spacers off after the cleat was screwed down.
I lived in my Dad’s shop growing up. It’s the source of some of my best memories. And now, after the passing of both my parents, I’ve moved back and the workshop is mine. I tear up nearly every time I am there. I need to make big changes (a lot has accumulated over 35 years), but I am afraid of losing the bond. Well, it’s a winter project....
Chris I was thinking about the kids room using the cleats that could be a game changer on keeping their rooms organized you can put a cleat system add a desk on a cleat at one height when they are little and move it up as they grow. No boundaries with the cleat.
After recently starting to add french cleats to my work space, I am almost addicted to your videos- and really enjoy watching the interaction with your children. Kudos to you.
She is so darling. I prefer to call you my friend. I have copied your cleat wall from your old shop. I am now building a new storage wall and I like the shelves, so I will use them. It's a bit more complicated as I have block walls, but I like a challenge. You are a inspiration to me and I suspect a lot of people. Stay safe my friend.
I have watched about 700 french cleat videos of yours and just can't get enough. Really enjoying the videos and love the inclusion of your kids! My daughter is only a year old now but I'm hoping she will enjoy hanging out in the shop in the future too. Keep up the great work, Chris!
MODULAR! I love modular stuff. Storage that you can reconfigure is always the most versatile, especially if it can be made portable. "Ugh, I really need to clean up that mess...." has been the motivation behind more shop builds than every other sentiment combined. I am a little surprised that you didn't make the side brackets triangles instead of squares. Seems like they might get in the way of shelves below. However, since you did leave them square, your comment about adding a secondary shelf to each unit is certainly true, but you could also add a dowel to the lower corner for tapes, clamps, or even rolls of brown paper. They'd also make nice hanging drying racks for smaller work pieces after painting or staining.
Awesome shelving. Did the same style shelves in my shop. For the side pieces I cut them at 45 degrees. One less square cut but it saved material for me to use on other wall cleats etc...
Chris I love watching your videos, and your name is pretty cool also. After watching your shop build, I emptied my shop, insulated, sheeted, and re-organized. Also, it goes without saying that I added a French Cleat wall. I love that you are a family man. Keep up the great work.
Brilliant project and really simple. I really need to finish my workshop and finish my French cleat wall...... so far I have 1 cleat and really need to put the rest up. I love your kiddies and the way they are always seeing what you're doing, I should try to get my youngest involved with making thinks. Keep up the great video's 👍
I like your videos. I especially appreciate the little nuggets. As a single father with a couple nuggets of my own. Its always a treat to see how you are with them.
Chris I just wanted to say I love all your videos. You're actually the reason I started to get back into wood working a little. I started out building a patio table and my next project is a bookshelf. Once again thank you for all your videos. Much love to you and your family God bless.
Chris you are the best! My goal in life is to help other people, otherwise what am I doing here! Your helping us appreciate your hard work. The details (sanded edges etc) are what separates average from awesome! Thanks!
Appreciate your insight and explanation on this build. Those little details compound and make a big difference in the end result. Like diamonds aren't too pretty until they're cut and polished. Good combination of efficiency and finish.
Added your video to my collection for ideas when I am able to get back to my Carport converted shop. Have been looking for ideas for shelves and these look great. Love seeing the kids in the video. Always take time for them. You have no idea how fast that time goes.
Thank you! It just seems to me that diagonal side supports will save material without sacrificing strength and also reduce possible interference below.
Chris....your shop is an inspiration! And your daughter is a cutie. Thank you for sharing.. please be safe. God bless you and the family. Also, the chocolate chip cookies you guys make are the bomb..
The Idea of being able to make this work is Awesome in my Books Chris and to understand ya don't hav to be Rocket Scientist to do this and ya Great Dad to hav the kids in shop doing things with the Kids teach them Young maybe follow in Dad's foot steps My Son did the same His work on Newr cars and trucks He Comes back and Askes me on Old Stuff good anyway Back to Wood Hangin Does the wood for Cleats have to be 3/4 inch or does half inch boards not great Idea Thks again for your Help on this From Canada SK Later keep them comin
Recently completed a workshop makeover, including some French Cleat walls. Watched dozens of videos on French Cleat ideas while planning the project, but your comment about "making details matter" ended up being a big inspiration and heavily influenced the effort. Decided to spend a little extra time and money to create a workspace I enjoy and take pride in, even if almost nobody else sees it. Thanks for the tip!
Chris, once again an informative and fun video in the continuing series of French Cleats. I have just covered the walls in my new shop with plywood and am about to commence the French Cleat route myself and will be using your videos as inspiration. Big shout out from Down Under.
Your comment of the second shelf could also put a dowel in there for tape, towels, rag, hanger for shop clothing. Great video doing that same in my little 10x16 shop.
In addition to adding the shelf for smaller item, I think I would add a bar of some kind for possible paper towels or craft paper storage. Out of the way and would be super accessible 👍 love seeing your vids I wish my 7 year old would enjoy being in the shop with me lol keep it up!
Hey...Chris....the sanding took a LOT less time after I changed out my miter saw blade to a 100 tooth and my skillsaw to an 80 tooth. still sanding the sharp edges, but a whole lot less sanding than before.
Chris from watching your videos I now use Starbond glue regularly to assist my glue ups. Thanks for the discount code. You are right, the CA glue is like a tool.
I just made a French cleat wall. I have made holders for various tools. I never thought of making shelves. Guess what? Now I’m going to make a couple of shelves. Why? Because I have a bunch of junk that I just can’t live without. Thanks for this wonderful idea.
Hey Chris, just installed my French Cleat system over this weekend and your channel and videos were the inspiration. I, like you, enjoy a well organized shop. I am having so much fun with it... my family thinks I'm a little nuts. Like you, I work full time and have a family but love messing around in the shop rather than watch TV. I am consistently thinking of new ways to find a way to have my tools at my finger tips. I will message you with my Instagram account so you can see the progress. Thanks for taking time out of your life to share with us your woodworking. I know that making these videos take a lot of time to shoot/edit etc.
Came here after watching your shed breakdown vids. Really informative and helpful! Then I clicked on this... after the star wars pun I couldn't help but subscribe! Keep up the great work!
Hi Chris, Happy Birthday. I like the way you are using your french cleat walls , I have even made some tool holders inspired by some of yours. Keep the videos rolling.
The story stick is how I did my wall. Mine was a little different, as I had it index to the top of each cleat, rather than spacing to the bottom. (in case the cleats were not quite exactly the same height.) I also started at the top and hung the new cleat from the pair of story sticks (a small spring clamp or pin nail to hold it in place.) while I screwed them in place.
I like this design for shelf units on a French Cleat wall. My shop is smaller so I made 4 of these 18" long. Mine are dual shelves like you suggested at the end and I made the lower shelf 3/4" wider to act as the lower support thus eliminating the need for a back piece (less plywood). So it's the same as yours but different hahaha. Yours inspired mine so thanks!
Hi from the UK :) I would have been tempted to cut the corner of the end shelf supports at 45% (like you did on your wife's) - It just gives that quality finish without affecting the strength. Also I know modern adhesives are great, but I'd still put a few screws in the cleats (especially if the shelves will carry some weight). Great channel BTW :D
When you slid the shelves together I felt it in my spin. Fantastic job.
I envision your house, the couch is mounted on french cleats. Lol!
Innovative stadium seating!
Hey Chris, I really enjoy your channel and videos. Not only do they provide great ideas and inspiration, but you have such awesome energy and infectious positivity. I'm also a family man working full time and getting my garage shop set up. Thank you for giving us all A GLIMPSE INSIDE!
Thank you so much brother. It really does mean a lot that you took the time to let me know. I really appreciate it
@@AGlimpseInsidehey man GREAT VIDEO! I have been binging all of the French cleat content. It might just be me, but from 9:44 on, your video doesn’t have sound.
Love that you are a family man, i also love to build. Espesally with my 2 kids. Pardon for my english i am from holland.
Thank you Very much. Thanks for reaching out all the way over from Holland. Hope everything’s going OK over there
@@AGlimpseInside everthing is ok here with Covid 19 and all.
I love that you stopped what you were doing to make time for your daughter and include her. That was awesome and made her feel good. You got a thumbs up just for that.
Storystick, why can’t I remember that, thanks for all the ideas from this video.
Father of the decade goes to you sir! I love your videos in every way
You are very kind sir. Thank you
Chris I love what you do, and certainly jealous of your shop. I’m 64 years old (retired) and I’m in process of building my workshop. Current building is 40’x60’x16’ , in which I am building a 18x30 shop area. I keep coming to your videos for inspiration and guidance. I am an absolute beginner and have a long time to go before I tackle something high end. But with your great content I hope to learn from you while doing the buildout of the shop itself. Thank you for what you do!
I did the same thing for spacing my French cleats on the wall, except I made hangers for spacing and started from the top down. Several reasons for that. One, the floor in my garage is not level, but the ceiling is. So my highest French cleat is 12" _down_ from the ceiling rather than some inches up from the floor, and everything else was indexed off that. Second, I cut 8' long French cleats to go on the wall; hanging them from above rather than balancing them on spacers below meant I didn't have to worry about a precariously balanced 8 foot long plywood noodle falling off the spacers before I could get the screws in. I used bolts for the bottom part of the spacer-hangers: I could fine adjust the height that way, and also back off the bolts to get the spacers off after the cleat was screwed down.
I get it... when my daughter comes to see me in the shop everything is put on pause 😁
I lived in my Dad’s shop growing up. It’s the source of some of my best memories. And now, after the passing of both my parents, I’ve moved back and the workshop is mine. I tear up nearly every time I am there. I need to make big changes (a lot has accumulated over 35 years), but I am afraid of losing the bond. Well, it’s a winter project....
so neat i love them... I tried to make 'one' tonight - now I see where i went wrong - mine is all wobbly
As usual, awesome video. Love the cameo appearance from your children, they are a delight
Chris I was thinking about the kids room using the cleats that could be a game changer on keeping their rooms organized you can put a cleat system add a desk on a cleat at one height when they are little and move it up as they grow. No boundaries with the cleat.
After recently starting to add french cleats to my work space, I am almost addicted to your videos- and really enjoy watching the interaction with your children. Kudos to you.
If you make the shelves upsidedown then the sides will keep the stuff from falling off. A cut curving the supports will make it look better.
She is so darling. I prefer to call you my friend.
I have copied your cleat wall from your old shop. I am now building a new storage wall and I like the shelves, so I will use them. It's a bit more complicated as I have block walls, but I like a challenge. You are a inspiration to me and I suspect a lot of people. Stay safe my friend.
Thank you so much. She is the best. Always good to hear from you hope everything is going well in your world
I have watched about 700 french cleat videos of yours and just can't get enough. Really enjoying the videos and love the inclusion of your kids! My daughter is only a year old now but I'm hoping she will enjoy hanging out in the shop in the future too. Keep up the great work, Chris!
Great project. Great dad. Shelves are coming in my shop. Thanks.
MODULAR! I love modular stuff. Storage that you can reconfigure is always the most versatile, especially if it can be made portable.
"Ugh, I really need to clean up that mess...." has been the motivation behind more shop builds than every other sentiment combined.
I am a little surprised that you didn't make the side brackets triangles instead of squares. Seems like they might get in the way of shelves below.
However, since you did leave them square, your comment about adding a secondary shelf to each unit is certainly true, but you could also add a dowel to the lower corner for tapes, clamps, or even rolls of brown paper. They'd also make nice hanging drying racks for smaller work pieces after painting or staining.
Draw out more plans like that and then frame them. It’ll make good shop decor. 😉
Thanks Kim that’s a good idea. Unfortunately I tossed it already
A Glimpse Inside have the kiddos draw some! That’ll make it even better!
Your shop is looking great. And the kids are having a great time helping dad. Thanks for the videos!
Awesome shelving. Did the same style shelves in my shop. For the side pieces I cut them at 45 degrees. One less square cut but it saved material for me to use on other wall cleats etc...
Awesome job, and really nice to see the kids running around and enjoying their time with dad. New subscriber here, love the content, keep it up :)
hi Chris... going to try mine again I have watched your video about 5 times now lol
Chris I love watching your videos, and your name is pretty cool also. After watching your shop build, I emptied my shop, insulated, sheeted, and re-organized. Also, it goes without saying that I added a French Cleat wall. I love that you are a family man. Keep up the great work.
Brilliant project and really simple. I really need to finish my workshop and finish my French cleat wall...... so far I have 1 cleat and really need to put the rest up. I love your kiddies and the way they are always seeing what you're doing, I should try to get my youngest involved with making thinks. Keep up the great video's 👍
Yeah man get to it! Thanks for the kind words and you know I will always advocate little ones hanging out with us in the shop
Thumbs up for having your daughter in the videos. Love it!
I like your videos. I especially appreciate the little nuggets. As a single father with a couple nuggets of my own. Its always a treat to see how you are with them.
Chris I just wanted to say I love all your videos. You're actually the reason I started to get back into wood working a little. I started out building a patio table and my next project is a bookshelf. Once again thank you for all your videos. Much love to you and your family God bless.
That’s really nice of you. Thank you so much Richard thank you for letting me know
I like the spacers!
Truth be told I installed one of them without beveling the top and they did get stuck. But yeah they work well LOL
These screws are awesome! I've been using them a lot for yard projects.
Great video and I love your cheery attitude, plus taking time for your daughter...
Just when I thought I was over French cleats... Great idea
Chris you are the best! My goal in life is to help other people, otherwise what am I doing here! Your helping us appreciate your hard work. The details (sanded edges etc) are what separates average from awesome! Thanks!
Thank you so much Tracy. I really appreciate these wonderful comments I hope you have a great day again
You can put a dowel rod on the bottom part for paper towels too!
Thanks Chris
Love your videos man. I'm going to make a french cleat wall priority in my shop. This is the most genius thing I've come across in a long time.
Wonderful jobs and great attitude! Really love what you do and how you do it, man!!!
Thank you very much Teddy
Appreciate your insight and explanation on this build. Those little details compound and make a big difference in the end result. Like diamonds aren't too pretty until they're cut and polished. Good combination of efficiency and finish.
Yes absolutely. Thank you so much
I really love that you included your little girl... bless you
Added your video to my collection for ideas when I am able to get back to my Carport converted shop. Have been looking for ideas for shelves and these look great. Love seeing the kids in the video. Always take time for them. You have no idea how fast that time goes.
You do nice work great Idea.. Your little one is a sweetheart!!
Great project video. Cute kids. Keep them involved and never apologize for the interruptions.
I am a subscriber and just wanted to say I really enjoy watching your videos. Great job!
Thank you! It just seems to me that diagonal side supports will save material without sacrificing strength and also reduce possible interference below.
Chris....your shop is an inspiration! And your daughter is a cutie. Thank you for sharing.. please be safe. God bless you and the family. Also, the chocolate chip cookies you guys make are the bomb..
Thank you Michael that’s really nice of you. Thank you for the kind words. Yes you’re right about those chocolate chip cookies they are amazing
Chris, I always enjoy your videos. Thanks.
Great job Chris. Good looking family. Thank you for sharing all your ideas. Helps allot. God Bless.
If you show that extra bit of pride and time in making your work space, people will know that you will show that pride in the projects that you make.
Hahaha Chris,
I love the sound effects.
"Hokie religions and lightsabers are no substitute for"... a good Crosscut Sled!
Came across your channel today...
looks like I’ll spend my day off watching your videos,
Really great man and dad.... 👍🏽👍🏽👍🏽
The Idea of being able to make this work is Awesome in my Books Chris and to understand ya don't hav to be Rocket Scientist to do this and ya Great Dad to hav the kids in shop doing things with the Kids teach them Young maybe follow in Dad's foot steps My Son did the same His work on Newr cars and trucks He Comes back and Askes me on Old Stuff good anyway Back to Wood Hangin Does the wood for Cleats have to be 3/4 inch or does half inch boards not great Idea Thks again for your Help on this From Canada SK Later keep them comin
Another fantastic video, really like your videos. Lots of fantastic information
Very satisfying. Great job!
A family man! Always remembering why he's doing this right next to him. You just got a new subscriber. Be blessed 🙌 🙏
Recently completed a workshop makeover, including some French Cleat walls. Watched dozens of videos on French Cleat ideas while planning the project, but your comment about "making details matter" ended up being a big inspiration and heavily influenced the effort. Decided to spend a little extra time and money to create a workspace I enjoy and take pride in, even if almost nobody else sees it. Thanks for the tip!
Mark this is really cool. Thank you so much for letting me know I’m being so kind. I hope you’re doing well my friend
Chris, those shelves are cool. Building some tomorrow. I only have 1/2” ply, wish me luck!
Shop is looking Good Bro! 👍👍
Chris, once again an informative and fun video in the continuing series of French Cleats. I have just covered the walls in my new shop with plywood and am about to commence the French Cleat route myself and will be using your videos as inspiration. Big shout out from Down Under.
Your comment of the second shelf could also put a dowel in there for tape, towels, rag, hanger for shop clothing. Great video doing that same in my little 10x16 shop.
Inspirational. Thought provoking.
Awesome stuff Chris
Love French cleats!
Hey Chris wonderful video! I have recently put up french cleats in my shop and I love them. They have saved me lots of space. Thanks!
Killing it with the French cleats!
I subscribed first on how good your channel is and secondly due to your adorable shop helper asked so nicely 😊
In addition to adding the shelf for smaller item, I think I would add a bar of some kind for possible paper towels or craft paper storage. Out of the way and would be super accessible 👍 love seeing your vids I wish my 7 year old would enjoy being in the shop with me lol keep it up!
That’s a great idea as well. Thank you for it. and thank you for watching
Wow another awesome project and simple but effective, hope you and yours are well Chris, stay safe buddy.
Criss, I really like the way you've done those shelves.
Love the intro, don't see a lot of RUclipsrs letting one of their biggest fans stand right next to them.
This made me actually laugh out loud because I had to double take and think what the heck you were talking about. Too funny brother
Chris great idea. I think I might this in shop.
i like what you did so much👏🏻👏🏻❤.
I love being in organised workplace
Hey...Chris....the sanding took a LOT less time after I changed out my miter saw blade to a 100 tooth and my skillsaw to an 80 tooth. still sanding the sharp edges, but a whole lot less sanding than before.
Looks awesome love your videos
Chris from watching your videos I now use Starbond glue regularly to assist my glue ups. Thanks for the discount code. You are right, the CA glue is like a tool.
David welcome to the light side LOL. Thanks brother I appreciate you letting me know also hope you’re doing well sir
Love the cleat wall Chris. Thanks for sharing. Until next time. *Chris*
What’s up Chris how you doing buddy thanks for joining in. Hope all is well
@@AGlimpseInside all is good, still here in GA working. Sure would like to get over your way for a visit one day.
Awesome video...with great little helpers.
So weird - I just installed some French cleats this weekend in my office. Thanks for the continued inspiration!
That looks so nice and clean. Fan from Cincinnati
Chris, yalls videos are always a joy to watch. Each week we look forward to the next one! Keep up the solid work
I just made a French cleat wall. I have made holders for various tools. I never thought of making shelves. Guess what? Now I’m going to make a couple of shelves. Why? Because I have a bunch of junk that I just can’t live without. Thanks for this wonderful idea.
Thanks for the great ideas! I'll be making your shelves later today!
Hey Chris, just installed my French Cleat system over this weekend and your channel and videos were the inspiration. I, like you, enjoy a well organized shop. I am having so much fun with it... my family thinks I'm a little nuts. Like you, I work full time and have a family but love messing around in the shop rather than watch TV. I am consistently thinking of new ways to find a way to have my tools at my finger tips. I will message you with my Instagram account so you can see the progress. Thanks for taking time out of your life to share with us your woodworking. I know that making these videos take a lot of time to shoot/edit etc.
Thank you man. I look forward to seeing your progress. Also thanks for being so kind too. I really appreciate it!
Thanks for sharing I’ll be making a few of them 👍🏻
Just came here to say Happy Birthday Chris!
Thank you so much
Came here after watching your shed breakdown vids. Really informative and helpful! Then I clicked on this... after the star wars pun I couldn't help but subscribe! Keep up the great work!
New member of your channel here, from Puerto Rico. Great video, I will definitely work on french cleats for my tools.
Happy belated birthday
Hi Chris, Happy Birthday. I like the way you are using your french cleat walls , I have even made some tool holders inspired by some of yours. Keep the videos rolling.
I like the simple design. Dowels or hooks on the back (under the shelf) would allow other storage options, space permitting.
The story stick is how I did my wall. Mine was a little different, as I had it index to the top of each cleat, rather than spacing to the bottom. (in case the cleats were not quite exactly the same height.) I also started at the top and hung the new cleat from the pair of story sticks (a small spring clamp or pin nail to hold it in place.) while I screwed them in place.
Looks good. Now come organize mine. It's just hope,skip and a jump to PA Chris. Bahahaha
Yeah just a quick stroll LOL. Thanks brother
This video came out just in time, I was thinking of putting some shelves up for my drill press and lathe
I like this design for shelf units on a French Cleat wall. My shop is smaller so I made 4 of these 18" long. Mine are dual shelves like you suggested at the end and I made the lower shelf 3/4" wider to act as the lower support thus eliminating the need for a back piece (less plywood). So it's the same as yours but different hahaha. Yours inspired mine so thanks!
Man! I truly enjoy your content!! Happy Belated Birthday!! Keep up the great work man!
Thanks man!
Awesome job Chris, great dad also 👍👍👍
Thank you!
A Glimpse Inside your most welcome mate
Chris, If those window sills are the epitome of the “mess” in your shop, then... well... shoot! I need to go clean my garage....
This actually made me laugh out loud
Thanks for the motivation!!!!!!!
You're a good pops!!
I try. Thanks brother
Hi from the UK :)
I would have been tempted to cut the corner of the end shelf supports at 45% (like you did on your wife's) - It just gives that quality finish without affecting the strength. Also I know modern adhesives are great, but I'd still put a few screws in the cleats (especially if the shelves will carry some weight). Great channel BTW :D
I did show a small segment of me putting screws in the cleats. I agree with you modern adhesives are great but..mechanical fasteners for the win