Good video. We have a 2005 LLY with 200k and the code is intermittent. I used to work with the Garrett guys at Honeywell ( who bought Garrett). The remanufactured by Garrett needs to be verified.
I have a similar issue. I also have been thinking of getting a reader programmer to have a clear understanding of issues and abilty to clear them. I'll use your experience and not waste my $ on new cheaper switches and just replace the turbo. I appreciate your info
My Truck lost power within 10 miles of filling up with fuel and it progressively got worse, but there was no water in the separator. It would hardly drain.
My 2004 LLY just turned 300,000 miles and so to celebrate he gave me the P2563 code. I don't drive this truck daily and so shut off the batteries when I park it. Sometimes I will use the truck for some work and right away get a code that does not come back I assume because the power is off for extended durations. But the P2563 will come back every third engine start so it appears to be a real issue. Is there any thoughts you would share after making this video?
To summarize; when I first bought the truck I was surprised how slow it accelerated and didn't want to go over 2000rmp unless towing. After about 300 miles I got the check engine lights referring to the turbo. After turbo replacement, truck overall sounds and runs better. I was relieved that the truck truly did operate how I imagined it should. If you do proceed with the turbo replacement, everyone brings up the fact of how difficult it is to loosen the bolts on the downpipe off the turbo. Hope this helps!
Hi guys can you help me. I have duramax with p003A fault code.diesel 2024 year.It shows me this error. The car became slow.The car only ran 1000 km.I didn't know exactly where the error was best regards ❤
@@maxthemarlinIs there any way you could possibly find out. I just rebuilt my turbo, and now getting codes, and it's surging and blowing light colored smoke intermittently. Acts like the veins are opening and closing whenever the ecm tells it to, but it is very erratic. Any help would be greatly appreciated.
Good video. We have a 2005 LLY with 200k and the code is intermittent. I used to work with the Garrett guys at Honeywell ( who bought Garrett). The remanufactured by Garrett needs to be verified.
I have a similar issue. I also have been thinking of getting a reader programmer to have a clear understanding of issues and abilty to clear them. I'll use your experience and not waste my $ on new cheaper switches and just replace the turbo. I appreciate your info
I have the same problem I barely got it a month ago
My Truck lost power within 10 miles of filling up with fuel and it progressively got worse, but there was no water in the separator. It would hardly drain.
Did your truck smoke or were there any other signs of the Turbo being bad that I need to look for?
My 2004 LLY just turned 300,000 miles and so to celebrate he gave me the P2563 code. I don't drive this truck daily and so shut off the batteries when I park it. Sometimes I will use the truck for some work and right away get a code that does not come back I assume because the power is off for extended durations. But the P2563 will come back every third engine start so it appears to be a real issue. Is there any thoughts you would share after making this video?
To summarize; when I first bought the truck I was surprised how slow it accelerated and didn't want to go over 2000rmp unless towing. After about 300 miles I got the check engine lights referring to the turbo. After turbo replacement, truck overall sounds and runs better. I was relieved that the truck truly did operate how I imagined it should.
If you do proceed with the turbo replacement, everyone brings up the fact of how difficult it is to loosen the bolts on the downpipe off the turbo.
Hope this helps!
My 2005 gmc serria HD sle has 500456 on it now still pulls really hard
Good to know, hoping to have mine for a long while
Hi guys can you help me. I have duramax with p003A fault code.diesel 2024 year.It shows me this error. The car became slow.The car only ran 1000 km.I didn't know exactly where the error was best regards ❤
After turbo installed did you relearned it ?
Not totally sure to be honest. If it did need to be relearned, then the shop did it
@@maxthemarlinIs there any way you could possibly find out. I just rebuilt my turbo, and now getting codes, and it's surging and blowing light colored smoke intermittently. Acts like the veins are opening and closing whenever the ecm tells it to, but it is very erratic. Any help would be greatly appreciated.