DCC Decoder Upgrade - Lifelike Budd RDC Canadian Pacific With Interior Lighting Install
HTML-код
- Опубликовано: 7 сен 2024
- This should be an awesome conversion, but fate may have different plans.
Amazon: www.amazon.ca/...
Patreon: / scottrails
You can contact me directly at scottrodsgarage@gmail.com
You may wish to consider the following idea: Instead of cutting short unused wires from the decoder harness (as you did with the green wire in this decoder install) I suggest you take the unused wire(s), coil them up neatly, and tack them down with a dab of hot glue. This "future proofs" the vehicle without making your future life potentially more difficult. As an electrical engineer, my rule has always been to never cut short a wire until you absolutely need to do so (I've been caught short (no pun intended) too many times by trying to be overly "neat").
The RDC Canadian Pacific reminds me of the Calgary to Edmonton Dayliner than ran between to the cities until the mid 1980's.
Nice work on the lighting.
I rode on RDCs a lot in the 1950's and 60's. That flickering of the interior lights was quite a common thing on the B&M Budd Cars. You lucked into a "feature", not a problem!
The motor connection can be on the circuit board also, you don't need a floating splice.
Interesting use of the original board. Well done and explained your procedure very nicely
The other side of those cuts go to the motor leads. If you left the motor leads attached to the board, you could solder the decoder motor leads to the pads on the other side of the cuts. I also agree that using the cutoff wheel is the best way as I have wired many of those Proto RDCs.
I thought about that, but wasn't happy with all those diodes etc.
I suspect the keep alive cable you added won’t help the way you hoped. The keep alive typically goes across the track pickups after the bridge rectifier on the decoder. That’s why there is the plug.
Great install and video Dave. Jersey Bill
Good video Dave, and that circuit board helped in many ways, for the running lights I would have used 3 leged led lights 2 color. 👍
Those LED strips have a sticky, adhesive backing, just peel off the protective strip and they will stick, at least mine do. The ones I have just using the backing have never let go. Just cut the foil on the circuit board. Then put a VOM across the terminals on the ohms mode to see if it is truly cut. Looks like you've got room enough for a cap & mini full wave bridge rectifier. I don't do DCC but I would think there would be specification sheet on any decoder on the market. Maybe you should have watched some other modeler install a decoder with a keep alive circuit. At least that's what I'd do first. Cheers from eastern TN
Great job on the install Dave great share have a great rest of your day and weekend 😎🚂🫵
Fantastic install dave! the proto RDCs are always a nice piece of kit to have, looks even better with all of the new features!
what a great epic upgrade to the Budd passenger car.. well done Dave..
And thank you John for supplying the patient.
Interesting board on the original model Dave.
Great work. 👍
Happy modelling
Nicely done dave
Very Nice interior lights, gonna need to put some figures in the car now..
Sunday live stream ;-)
Nice I like it
Dremel tool with cutting disk makes short work of copper traces.
Dang, never thought of that
Love the video. Thank you my friend.
I have both H.O. and n scale model railroad stuff.
Do you have layouts for both, or are they combined?
@@ScottRails no but I have the track, engines, and rolling stock. The apartment I am living in is not quite big enough. Hopefully when my mom and I move I will have enough space.
@@Pinboy50 There's always the option to have a fold down layout, but you wouldn't have much room for buildings etc.
need folk in the car, got lighting lets see people
We will be painting people on tonight's stream.
Nicely done !!! What is a "123 block" ?
1" by 2" by 3" metal block. Very handy for mini construction, and they can be bolted together to create right angles etc. I just use them as weights, hahaha
@@ScottRails Never saw them before ... and I've been around for many years lol
Passengers?
I think we will be painting passengers on Sunday's stream.