Got mine from your store last week, and I love it for smaller parks. It’s taking some hits too. Just grass crashes so far and no damage except bent props. I’m glad I got this little dude. It reminds me of the Tinyhawk 2 freestyle but much better and it was easy to setup. Thanks guy’s!
I got mine from your store in the normal record time. I decided to use my binding phrase to bind. A little more involved. But not hard. Love your instruction videos. Have a great rest of your day!!
For some reason I cant bind them, the LED on the drone starts blinking and i press the bind button and then nothing happens and the drone continues to flash rapidly
Need a detailed video on the complete installation of the most current radio update, firmware update, bootloader update and the final step the receiver updates for the Taranis X9D 2019 and TX16S radios. very confusing from all the piece meal videos out there would be great for an all in one place video for the complete process. Thanks
Seems to me they redesign ever piece of software every 3 months and never even finish polishing the UI for everyone before they completely redo it again. I don't know computers and I don't have wifi. I thought I was just gunna push the bind button on all my devices and start flying lmfao I'm retarded I guess.
I bought some of this double sided sticky foam tape squares, and it's binding really good to my fingers, my face, and everything else. So if you want something easy to bind, get sticky tape.
So on a diy drone you bind it with betaflight like this?! Ive been stuck on finding videos on how to set up the damn boxer and bind it to the drone and the correct switches and settings in the boxer im so lost. Im use to DJI black remote and never learned this cause starting out in FPV i wanted simple AF press remote bind then air unit done then goggles bind button then unit done and I'm flying. This is a new curve for me to learn and still haven't got my drone flying until you guys pointed out the betaflight binding part i didn't know about and no one else explained. Thank you GH
Thanks for the vid... I have the baby ape and tx16s, Can't get the baby ape with elrs rx to go into dfu mode....(rx) tried the 3 quick starts, many times, Its on, but no flashing light. Betaflight does not have that bind button on my system.... what do you suggest ? Not sure which elrs came with the baby ape...
Hello, I have a problem with my ELRS receiver RX on my drone. It has a green light in solid state. ( Bricked ) It doesn't give me the Wi-fi option and my controller is not connected, it is even turned off. Any other wired option, or any method, to repair and return to the light blinking for the wifi 🛜 or bind ExpressLRS of the RX receiver? Thank you
Hi, my nazgul has an external ELRS receiver on it. In this case, i dont find bind receiver option in betaflight. How to get this binded. I have a Radiomaster boxeer ELRS *Inbuilt version. I did power cycle three times but the receiver is somehow not getting into binding mode.
Everything worked fine besides the fact that when I go to the receiver tab I don't see the "bind receiver" option. This is in beta flight. Can you help?
For anyone wondering how i figured this out here, so you have to bind the drone to the controller first, before that tab will show up. You can bind it over Wifi or ExpressLRS which i used. Goodluck everyone.
This video is one of the best, straight to the point, no bullchit way of how to bind elrs to tx16. Thats how its done dudes 🤘🇺🇸🔥
Got mine from your store last week, and I love it for smaller parks. It’s taking some hits too. Just grass crashes so far and no damage except bent props.
I’m glad I got this little dude. It reminds me of the Tinyhawk 2 freestyle but much better and it was easy to setup.
Thanks guy’s!
Thank you!
I got mine from your store in the normal record time. I decided to use my binding phrase to bind. A little more involved. But not hard. Love your instruction videos. Have a great rest of your day!!
For some reason I cant bind them, the LED on the drone starts blinking and i press the bind button and then nothing happens and the drone continues to flash rapidly
Need a detailed video on the complete installation of the most current radio update, firmware update, bootloader update and the final step the receiver updates for the Taranis X9D 2019 and TX16S radios. very confusing from all the piece meal videos out there would be great for an all in one place video for the complete process. Thanks
Seems to me they redesign ever piece of software every 3 months and never even finish polishing the UI for everyone before they completely redo it again.
I don't know computers and I don't have wifi. I thought I was just gunna push the bind button on all my devices and start flying lmfao I'm retarded I guess.
I wished it was that easy with my tx12. That radio you have has to be pre-configured with express lrs
I bought some of this double sided sticky foam tape squares, and it's binding really good to my fingers, my face, and everything else. So if you want something easy to bind, get sticky tape.
Better than super glueing your phone to your ear!🤣🤣
Was having the same issue with some CA the other night, wouldnt bind except to my fingers.
Great video guys. Gonna have to start changing out all my recievers (13) to ELRS, much better than Frsky RXs.
So on a diy drone you bind it with betaflight like this?! Ive been stuck on finding videos on how to set up the damn boxer and bind it to the drone and the correct switches and settings in the boxer im so lost. Im use to DJI black remote and never learned this cause starting out in FPV i wanted simple AF press remote bind then air unit done then goggles bind button then unit done and I'm flying. This is a new curve for me to learn and still haven't got my drone flying until you guys pointed out the betaflight binding part i didn't know about and no one else explained. Thank you GH
Thanks for the vid... I have the baby ape and tx16s, Can't get the baby ape with elrs rx to go into dfu mode....(rx) tried the 3 quick starts, many times, Its on, but no flashing light. Betaflight does not have that bind button on my system.... what do you suggest ? Not sure which elrs came with the baby ape...
Same you figure anything out
Hello, I have a problem with my ELRS receiver RX on my drone. It has a green light in solid state. ( Bricked ) It doesn't give me the Wi-fi option and my controller is not connected, it is even turned off. Any other wired option, or any method, to repair and return to the light blinking for the wifi 🛜 or bind ExpressLRS of the RX receiver? Thank you
could you send me a picture of your ports tab page? I am not sure if my settings are correct. My binding process didn't go as yours did.
Hi, my nazgul has an external ELRS receiver on it. In this case, i dont find bind receiver option in betaflight. How to get this binded. I have a Radiomaster boxeer ELRS *Inbuilt version. I did power cycle three times but the receiver is somehow not getting into binding mode.
Everything worked fine besides the fact that when I go to the receiver tab I don't see the "bind receiver" option. This is in beta flight. Can you help?
ever figure it out
Anyone? 😭
Same bro anyone please
For anyone wondering how i figured this out here, so you have to bind the drone to the controller first, before that tab will show up. You can bind it over Wifi or ExpressLRS which i used. Goodluck everyone.
They didn't quite make it clear you have to bind it first. The title confused me aswell but i figured it out.
Not even close to this easy.
What about if the elrs has a binding phrase ???
this doesnt work anymore. tried the exact steps and after clicking Bind it does nothing. no idea how you binded this way
Really wish you’d do one for crossfire and the zorro 🙏🙏🙏
OK the million dollar question is....can you bind it to the Old original T8SG Jumper radio ( silver/black )...OR it's Plus V3 Jumper version ?
Video coming on this topic
@@graysonhobby Great
I put airmode on a switch, turn it off when landing and arming.
How to bind it to a Elrs Boxer radio!
is that spi or serial?
☹️ p͎r͎o͎m͎o͎s͎m͎