This is one of the best explanation videos I've been able to find! Not sure if you're still monitoring your videos from 11 years ago, but thank you bunches!
This is honestly one of the best videos in helping us understand upholstery foam in America. You made it clear and easy to understand the fundamentals. Stay awesome you guys! 😊🌎🌄
Thank you sir for different foam materials. Can you please make informative videos on car seat foams about density, ILD and costs. Thank you again.. Have a nice day!
Thank you for making this video! I do have a question- I am trying to find a impact suppression foam that would go under a.5" dense rubber gym mat. The mat is roughly 2'x4'. The goal is to place 2" thick foam material under that rubber mat to help absorb impact from dropping weights (Roughly 250-300lbs) - It is actually 500-600lbs total weight on a deadlift bar, but the padding/foam set up would be on each side of the barbell to take on the load. I tried 1.5" NBR foam that I bought at Home Depot (kneeling knee pad foam), but it has a lot of bounce causing the weight to fly in an uncontrollable manner. What type of foam would be appropriate? I was thinking a rebonded or memory foam. Note that the weight would be partially distributed across the entire foam surface because of the dense rubber mat. I could even put a 1/4" ply board in between the rubber and foam. I need a form that will be stiff enough not to sink in when the weight is at rest... as I lift the weight up, it would inflate back to it's starting point and then compress to absorb the weight drop with minimal weight bouncing.
Great question! Based on your description, Rebond foam would be the most suitable foam type. Our Rebond foam is offered as a solid and can be found here: foamonline.com/product-category/foam/rebond-foam/
Excellent illustration of each! Do you think rebond foam at 5lb/cu.ft at 3-5 inches in depth would provide a reasonable use life for a DIY garage gym olympic weightlifting platform? Is there a particular type of cover or upholstery manufacturer you'd recommend for this type of environment and use case? Thanks!
Hi there! Closed Cell foam is Polyethylene based whereas Charcoal foam is Polyurethane based. Being Polyethylene based makes Closed Cell foam water-resistant, buoyant, and mold, rot, and mildew resistant. Closed Cell foam is typically used for marine-related tasks. Charcoal foam is an open cell foam typically used to keep items safe in cases as well as during packing and shipping.
Sir thanks for your video! What could u recommend for making the most secure possible makeshift armor for knees and elbows and so on? My mum has started working on his old motorbike and the traffic in my town is very, very scary. We don't have money to buy protectors but I want to make something so she's more safe, aesthetics is clearly not important Thank you so much for reading
We would recommend 0.5 inch thick Closed Cell foam in the firmness extra firm. You can price quote or purchase by clicking here: foamonline.com/product/closed-cell-foam-roll/
Auto upholsterers use High Resilience foam because of its longevity and ability to provide comfort in long term seating. It is used in a firmness of extra firm (ILD 70), providing a very firm seating base and is layered with a softer firmness of medium firm on top of the extra firm in 1" or 2" thickness for comfort.
@@FoamWizard is this technique (extra firm with medium/softer firmness) also applicable for motorcycle seats? (eventually with the insertion of a gel pad below the top layer)
@@didiergrieten8471 Good question. No, motorcycle seats are done primarily in High Resilience extra firm without the use of a softer pad on the top for a few reasons. The first reason is that the foam seating area is less square footage and the second reason is that the thickness of a motorcycle seat is less than a car seat. The third reason is that car seats have no-sag spring framing, giving a bounce, whereas the motorcycle seat framing is normally on a plastic or metal flat plate without springs.
Memory foam is a Polyurethane based foam with elasticity added to it. Molding foam is normally a 2-part pour into a mold and when cured, the product is formed.
i am looking at your site and would like to buy something for my needs if i may explain, i am 6'3 and 290lbs back in october 11, 2023 i received a 3" piece of foam 22"x22" from a different retailer (Density 2.24 LB/CF ) - i sit on it every day for 8-12 hours while working from home 7 days a week it already has flat spots from my butt and near the knees - and when i sit on it first thing in the morning, after about 20 minutes its flat and my butt hurts and my back hurts which foam from your site would be best for my situation? cost is not an issue thanks in advance
Hi there. Thanks for your comment! We're more than happy to help. Based on your description, there are two options that would be suitable - High Resilience foam in a firmness of Super Firm (ILD 100) and Rebond foam in a firmness of Super Firm (ILD 240). Super Firm High Resilience foam would be on the softer side when compared to our Rebond foam. Rebond is the firmest foam type we offer. Our High Resilience foam is considered excellent quality at a density of approximately 2.8 lbs and our Rebond foam is considered premium quality at a density of approximately 4.45 lbs. We hope this helps! Let us know if you have any other questions.
Hi Tinu. Unfortunately, we are not familiar with any foam type that would be translucent. We do carry foam, such as High Density, which is in the color white, that reflects a shadow when light is used. High Density in a firmness of Extra Firm is also insulating against sound and thermal.
What exactly does it mean when a mattress or a leg support pillow says that it is made of 25D normal foam? What is this made of and what are its specifications? Thank you for your much needed help!
The word "normal foam" is referring to a Polyurethane based foam product that is available in varying weights per cubic foot to determine quality. In this case, 25D is referring to 2.5 pounds per cubic foot as its density. This is the minimum weight to qualify as an excellent quality High Resilience type foam, which is available from very soft to extra firm.
We would suggest the foam type Closed Cell in a thickness of 1 inch that will be glued to the bottom of either the foam type High Resilience for interior use, or Dry Fast for exterior use. The purpose of the 1 inch is to provide buoyancy. It also provides protection from moisture, as the Closed Cell foam is non-water absorbent, and will not mold, rot, or mildew.
PLEASE HeLP!!! I’m making a silicone mermaid tail that I will be swimming in, the body is made of neoprene fabric but I’d like to use some foam to cushion areas like the bend of my knees and ankles, what kind of foam could be used completely submerged in water like that?
There are two foam types that will work in water. You could use closed cell Foam, which crinkles and doesn’t bend easily or dry fast foam, which does bend easily.
Hi Sir, thanks for the informative video. I’m looking for a foam that would be suitable for backpacks’ back panel. This would prevent items that are inside the pack to poke against the back of the carrier, as well as giving some sort of structure to a backpack that does not have suspension and that would therefore tend to collapse on its own. Closed cell foam seems a good option to me as it repels water (or sweat) but maybe something less firm than the one shown in the video?
We would recommend the foam type Closed Cell. It is flexible, bends, and is pliable up to a thickness of 1 inch. In any thickness after 1 inch, the foam begins to become more stiff and rigid.
Foam padding in shoes require a rubber-based material known as ensolite. Another common material used in shoe padding is neoprene, a rubber based material that is also used in wetsuits.
Of course, thank you for your kind words! The best 1-inch padding for chair pads would be a High Resilience type foam in a firmness of firm to extra firm.
There are two different types of foam that can be used for sound-proofing. The first is known as Charcoal foam in the firmness extra firm and in a minimum of 1-inch thickness. This foam is popular in the Egg Crate design for the purpose of reversing sound waves that enter the cones and reflect back. The second is known as Closed Cell foam in the firmness extra firm and in a minimum thickness of 0.5 inches. This foam type is a solid stop for acoustics. There are no open air channels and the sound is blocked.
good afternoon sir, i'm from south africa and would like to start a foam business. can you please share what chemical components does one need for making foam mattresses.
Foam is composed of three different chemical components: polyols, diisocyanates, and a carbon-based blowing agent. When these three components combine, they create a chemical reaction, which then produces a liquid. When that liquid cools, it hardens and becomes foam. (Source: Kiera Pritchard)
@@FoamWizard thank you sir, there is a thing I get people calling density how do I get the different density results? What's the mixture ratio for the different densities? Thank you once more.
@@tshimenagauthiernsaka2945 The technical information associated with the mixture ratio that determines density is beyond the comprehension of most consumers. Unfortunately, we are unable to share density composition structures on this platform.
what kind of ergonomic foam is required for padding ( for metal handrail bars ) to protect the frontal body ( ribs , belly)while a person is stooping & reaching out from a man cage?
@@FoamWizard is this open cell type or closed? Will it be comfortable and ease the pressure on their body against a internally protruding handrail , when they are exerting, extending , reaching out from the mancage , for heavy activities?
@@manishmadanmohan High Resilience foam is open cell, and it will be more comfortable than the Closed Cell foam because it has some give to it. We also offer Closed Cell foam, but did not recommend it because we believe it is too stiff and rigid, and would not provide the comfort level that High Resilience foam would.
@@FoamWizard Thank you very much for the quick reply. you earned a dedicated fan.😁 Since the location of the mancage unit will be in the heat & in sunlight of harsh middle east desert , what open cell foam material is available that is UV resistant , heat resistant and has long life ? Is the foam of EVA material ? Moreover , it will be subjected to regular usage , so it should not be flattened over time & have memory foam like capabilities?
@@manishmadanmohan Based on the description you have provided, we would actually recommend Closed Cell foam. High Resilience foam would work well in an enclosed environment, not exposed. Closed Cell is EVA material, should not flatten over time, and does harbor capabilities similar to Memory foam.
Thanks for the information! I'm wondering if you can assist me. There used to be a product called The Posh Magic Rainbow Sponge. The company is not in business any longer but I'm very interested in finding foam that can be used with my Alcohol inks. I've tried the magic sponge used for cleaning but the cleaning agents leave a powdery residue on my substrate. Like glass, ceramic or yupo. Can you recommend a density of foam that would work? Also there used to be a product called magic foam and it can be heated and molded to use as custom stamps. There are videos better in RUclips for both. Thanks in advance!
Unfortunately, The Posh Magic Rainbow Sponge has characteristics that are difficult to replicate and are unable to recommend a foam type that would perform to its specifications.
@@FoamWizard I understand. Can you help me identify a foam that is similar in density to the magic cleaning sponge. It's very similar and perfect for the inks except for the residue from the added cleaning ingredients.
@@FoamWizard I'm looking for something that is similar in density and firmness and quality of a magic sponge. A cosmetic wedge sponge absorbes too much ink. While foam blocks didn't absorb any ink.
@@FoamWizard I'm not looking for a replacement to the Rainbow Sponge per se. I'm looking for sponge material that would be suitable for painting with alcohol inks. A few manufacture dabbers that work well like Ranger applicators but I would like blocks of foam for my art. Thanks for your reply. I'll keep researching. I've sent requests to other companies as well. Thought you might know because this video was so informative.
@@melodyaxe745 In our experience, we have found that High Density foam absorbs fluid. It should be able to absorb ink, although this is not its intended application. We would suggest ordering a sample block.
I love how he just throws foam and water on the ground like he doesn't care.
Just tossing the foam without a care
Hi, Dave: Your website and the video are top-notch, easy to understand in this wild, wild, "foam" world! Thanks for helping me find the right foam! :)
This is one of the best explanation videos I've been able to find! Not sure if you're still monitoring your videos from 11 years ago, but thank you bunches!
Thank you so much for the kind words! We're really happy to hear that. If you ever have any questions, we're always here to help!
This is honestly one of the best videos in helping us understand upholstery foam in America. You made it clear and easy to understand the fundamentals. Stay awesome you guys! 😊🌎🌄
Thank you for your kind words!
Heck yeah man! We need more people like you, Thanks for sharing your knowledge! 😇🌟
Incredibly informative, thank you!
Thank you for the kind comment, we're happy to help!
great info - thank you!!
Thanks for the support!
Very good and informative foam vid. Who know there were so many types of foam and their rating system?
Thank you for complete guide to foams.
Thank you! This helped me so much!
Glad it helped!
Thank you sir for different foam materials. Can you please make informative videos on car seat foams about density, ILD and costs.
Thank you again.. Have a nice day!
Very informativ. Thank you.
Awesome!
Thank you for making this video! I do have a question- I am trying to find a impact suppression foam that would go under a.5" dense rubber gym mat. The mat is roughly 2'x4'. The goal is to place 2" thick foam material under that rubber mat to help absorb impact from dropping weights (Roughly 250-300lbs) - It is actually 500-600lbs total weight on a deadlift bar, but the padding/foam set up would be on each side of the barbell to take on the load.
I tried 1.5" NBR foam that I bought at Home Depot (kneeling knee pad foam), but it has a lot of bounce causing the weight to fly in an uncontrollable manner. What type of foam would be appropriate? I was thinking a rebonded or memory foam.
Note that the weight would be partially distributed across the entire foam surface because of the dense rubber mat. I could even put a 1/4" ply board in between the rubber and foam. I need a form that will be stiff enough not to sink in when the weight is at rest... as I lift the weight up, it would inflate back to it's starting point and then compress to absorb the weight drop with minimal weight bouncing.
Great question! Based on your description, Rebond foam would be the most suitable foam type. Our Rebond foam is offered as a solid and can be found here: foamonline.com/product-category/foam/rebond-foam/
bruh this school project led me to watching a guy tell me about foam nawwwwww
Excellent illustration of each! Do you think rebond foam at 5lb/cu.ft at 3-5 inches in depth would provide a reasonable use life for a DIY garage gym olympic weightlifting platform? Is there a particular type of cover or upholstery manufacturer you'd recommend for this type of environment and use case? Thanks!
Thank you, Brent! Yes, Rebond foam would be suitable. For a cover, we would recommend spirit millennium naugahyde vinyl.
@@FoamWizard Thanks!
i love it ..you r the best
i want to order right now, mattress
tanks for the info
Hello, could you explain the difference between Closed cell foam and Supreem/Charcoal foam? Thank you!
Hi there! Closed Cell foam is Polyethylene based whereas Charcoal foam is Polyurethane based. Being Polyethylene based makes Closed Cell foam water-resistant, buoyant, and mold, rot, and mildew resistant. Closed Cell foam is typically used for marine-related tasks. Charcoal foam is an open cell foam typically used to keep items safe in cases as well as during packing and shipping.
@@FoamWizard Thank you very much!
Sir thanks for your video!
What could u recommend for making the most secure possible makeshift armor for knees and elbows and so on?
My mum has started working on his old motorbike and the traffic in my town is very, very scary. We don't have money to buy protectors but I want to make something so she's more safe, aesthetics is clearly not important
Thank you so much for reading
We would recommend 0.5 inch thick Closed Cell foam in the firmness extra firm. You can price quote or purchase by clicking here: foamonline.com/product/closed-cell-foam-roll/
What foam do auto upholsterers use and why and how do the layer them
Auto upholsterers use High Resilience foam because of its longevity and ability to provide comfort in long term seating. It is used in a firmness of extra firm (ILD 70), providing a very firm seating base and is layered with a softer firmness of medium firm on top of the extra firm in 1" or 2" thickness for comfort.
@@FoamWizard is this technique (extra firm with medium/softer firmness) also applicable for motorcycle seats? (eventually with the insertion of a gel pad below the top layer)
@@didiergrieten8471 Good question. No, motorcycle seats are done primarily in High Resilience extra firm without the use of a softer pad on the top for a few reasons. The first reason is that the foam seating area is less square footage and the second reason is that the thickness of a motorcycle seat is less than a car seat. The third reason is that car seats have no-sag spring framing, giving a bounce, whereas the motorcycle seat framing is normally on a plastic or metal flat plate without springs.
Which one do they use in life jackets?
What is the diffrence between high density memory foam and high density mold shaping foam and which is firmer not to sag after sitting long hours ?
Memory foam is a Polyurethane based foam with elasticity added to it. Molding foam is normally a 2-part pour into a mold and when cured, the product is formed.
Cold cure foam is the same mold shaping foam or diffrent foams ?
@@i_Vex169 Cold curing is the production of foam shapes without the application of heat.
Thank you!
Very informative and I did learn a lot although he made me chuckle every time he tossed a piece aside.
Kinda the "Fonzy" of foam. lol
Aka the Foam Wizard.
i am looking at your site and would like to buy something for my needs
if i may explain, i am 6'3 and 290lbs
back in october 11, 2023 i received a 3" piece of foam 22"x22" from a different retailer (Density 2.24 LB/CF ) - i sit on it every day for 8-12 hours while working from home 7 days a week
it already has flat spots from my butt and near the knees - and when i sit on it first thing in the morning, after about 20 minutes its flat and my butt hurts and my back hurts
which foam from your site would be best for my situation? cost is not an issue
thanks in advance
Hi there. Thanks for your comment! We're more than happy to help. Based on your description, there are two options that would be suitable - High Resilience foam in a firmness of Super Firm (ILD 100) and Rebond foam in a firmness of Super Firm (ILD 240). Super Firm High Resilience foam would be on the softer side when compared to our Rebond foam. Rebond is the firmest foam type we offer. Our High Resilience foam is considered excellent quality at a density of approximately 2.8 lbs and our Rebond foam is considered premium quality at a density of approximately 4.45 lbs. We hope this helps! Let us know if you have any other questions.
Which foam type is insulating and translucent? I need 3/4 inch foam white foam that you can see the shadow of your hand on the back.
Hi Tinu. Unfortunately, we are not familiar with any foam type that would be translucent. We do carry foam, such as High Density, which is in the color white, that reflects a shadow when light is used. High Density in a firmness of Extra Firm is also insulating against sound and thermal.
What exactly does it mean when a mattress or a leg support pillow says that it is made of 25D normal foam? What is this made of and what are its specifications? Thank you for your much needed help!
The word "normal foam" is referring to a Polyurethane based foam product that is available in varying weights per cubic foot to determine quality. In this case, 25D is referring to 2.5 pounds per cubic foot as its density. This is the minimum weight to qualify as an excellent quality High Resilience type foam, which is available from very soft to extra firm.
@@FoamWizard Thanks a ton for your reply and your expertise!
What do use on a motorcycle seat
For a motorcycle seat, we would recommend the foam type High Resilience in a firmness of Extra Firm.
Hi sir good day , really like your video. I would like to know what is the best buoyancy foam for boats.
Hoping for your response thank you!
We would suggest the foam type Closed Cell in a thickness of 1 inch that will be glued to the bottom of either the foam type High Resilience for interior use, or Dry Fast for exterior use. The purpose of the 1 inch is to provide buoyancy. It also provides protection from moisture, as the Closed Cell foam is non-water absorbent, and will not mold, rot, or mildew.
I will like to make a drone case. Which of these foam have to get for this purpose?
Charcoal foam is the foam type most commonly used for cases and what we would recommend for your application.
PLEASE HeLP!!! I’m making a silicone mermaid tail that I will be swimming in, the body is made of neoprene fabric but I’d like to use some foam to cushion areas like the bend of my knees and ankles, what kind of foam could be used completely submerged in water like that?
There are two foam types that will work in water. You could use closed cell Foam, which crinkles and doesn’t bend easily or dry fast foam, which does bend easily.
Foam Online thank you so so much!!! You are an amazing help!!! I’ll be getting the dry fast foam!!!
What firmness would be best?
We recommend it in firm.
What is the exact name of the closed cell foam?
The technical term is polypropylene.
Hi Sir, thanks for the informative video. I’m looking for a foam that would be suitable for backpacks’ back panel. This would prevent items that are inside the pack to poke against the back of the carrier, as well as giving some sort of structure to a backpack that does not have suspension and that would therefore tend to collapse on its own. Closed cell foam seems a good option to me as it repels water (or sweat) but maybe something less firm than the one shown in the video?
We would recommend the foam type Closed Cell. It is flexible, bends, and is pliable up to a thickness of 1 inch. In any thickness after 1 inch, the foam begins to become more stiff and rigid.
How about shoes
Foam padding in shoes require a rubber-based material known as ensolite. Another common material used in shoe padding is neoprene, a rubber based material that is also used in wetsuits.
we are foam cutting, making machine Manufacturer..
pls touch us..
ruclips.net/video/BUPnoB8lL44/видео.html which foam is being used in this video ?
It seems as though a type of Styrofoam is being used in this video, which we don't offer.
Hello bro sapling sir
thanks
11 years later and still a good video, thanks!
Thank you for your kind words!
I concur, this was SUPER helpful, both the educational explaination and the show-n-tell of each of the visuals was on point! Thank you!
Ty for the explanation magic foam wizard man ✨️
I love how he's just stating facts, throwing foam, and pouring water on the floor.
😎
What kind of foam would you recommend for sculpting a mascot costume?
Hi there! Extra Firm High Density foam is paintable, lightweight, and easy to carve.
Maybe an ILD is some type of box. Or truck.
ILD stands for Indentation Load Deflection, used to determine foams given firmness.
Thanks
thanks Dave, top notch. What is the best 1 inch padding for chair pads?
Of course, thank you for your kind words! The best 1-inch padding for chair pads would be a High Resilience type foam in a firmness of firm to extra firm.
What foam would best be used in an archery target?
Closed Cell foam, as it has great tensile strength and won’t rip or tear. A cheaper alternative that won’t last as long would be High Density foam.
Which foam type that used to making outsole shoes ?
Rebond foam would be used for this application.
@@FoamWizard thankyou
Hi sir, which one can be use for soundproofing? Thank you.
There are two different types of foam that can be used for sound-proofing. The first is known as Charcoal foam in the firmness extra firm and in a minimum of 1-inch thickness. This foam is popular in the Egg Crate design for the purpose of reversing sound waves that enter the cones and reflect back. The second is known as Closed Cell foam in the firmness extra firm and in a minimum thickness of 0.5 inches. This foam type is a solid stop for acoustics. There are no open air channels and the sound is blocked.
@@FoamWizard the 1st one is available here in philippines, thanks for the reply
good afternoon sir, i'm from south africa and would like to start a foam business. can you please share what chemical components does one need for making foam mattresses.
Foam is composed of three different chemical components: polyols, diisocyanates, and a carbon-based blowing agent. When these three components combine, they create a chemical reaction, which then produces a liquid. When that liquid cools, it hardens and becomes foam. (Source: Kiera Pritchard)
@@FoamWizard thank you sir, there is a thing I get people calling density how do I get the different density results? What's the mixture ratio for the different densities? Thank you once more.
@@tshimenagauthiernsaka2945 The technical information associated with the mixture ratio that determines density is beyond the comprehension of most consumers. Unfortunately, we are unable to share density composition structures on this platform.
Hi Sir, I want to connect with you to get a consultation for foam selection for a hygiene apparatus. Let me know please
what kind of ergonomic foam is required for padding ( for metal handrail bars ) to protect the frontal body ( ribs , belly)while a person is stooping & reaching out from a man cage?
We would recommend the foam type High Resilience in the firmness extra firm.
@@FoamWizard is this open cell type or closed? Will it be comfortable and ease the pressure on their body against a internally protruding handrail , when they are exerting, extending , reaching out from the mancage , for heavy activities?
@@manishmadanmohan High Resilience foam is open cell, and it will be more comfortable than the Closed Cell foam because it has some give to it. We also offer Closed Cell foam, but did not recommend it because we believe it is too stiff and rigid, and would not provide the comfort level that High Resilience foam would.
@@FoamWizard Thank you very much for the quick reply. you earned a dedicated fan.😁
Since the location of the mancage unit will be in the heat & in sunlight of harsh middle east desert , what open cell foam material is available that is UV resistant , heat resistant and has long life ? Is the foam of EVA material ?
Moreover , it will be subjected to regular usage , so it should not be flattened over time & have memory foam like capabilities?
@@manishmadanmohan Based on the description you have provided, we would actually recommend Closed Cell foam. High Resilience foam would work well in an enclosed environment, not exposed. Closed Cell is EVA material, should not flatten over time, and does harbor capabilities similar to Memory foam.
the foam gansta!
The Foam Wizard!
Thanks for the information! I'm wondering if you can assist me. There used to be a product called The Posh Magic Rainbow Sponge. The company is not in business any longer but I'm very interested in finding foam that can be used with my Alcohol inks. I've tried the magic sponge used for cleaning but the cleaning agents leave a powdery residue on my substrate. Like glass, ceramic or yupo. Can you recommend a density of foam that would work? Also there used to be a product called magic foam and it can be heated and molded to use as custom stamps. There are videos better in RUclips for both. Thanks in advance!
Unfortunately, The Posh Magic Rainbow Sponge has characteristics that are difficult to replicate and are unable to recommend a foam type that would perform to its specifications.
@@FoamWizard I understand. Can you help me identify a foam that is similar in density to the magic cleaning sponge. It's very similar and perfect for the inks except for the residue from the added cleaning ingredients.
@@FoamWizard I'm looking for something that is similar in density and firmness and quality of a magic sponge. A cosmetic wedge sponge absorbes too much ink. While foam blocks didn't absorb any ink.
@@FoamWizard I'm not looking for a replacement to the Rainbow Sponge per se. I'm looking for sponge material that would be suitable for painting with alcohol inks. A few manufacture dabbers that work well like Ranger applicators but I would like blocks of foam for my art. Thanks for your reply. I'll keep researching. I've sent requests to other companies as well. Thought you might know because this video was so informative.
@@melodyaxe745 In our experience, we have found that High Density foam absorbs fluid. It should be able to absorb ink, although this is not its intended application. We would suggest ordering a sample block.