This video is super helpful. I've watched it a few times when ever I need to change the settings for my fusion se. You explained everything really well.
Awesome 👌 You hit the nail on the perverbial head...lol the program card the hobbyshop sold me doesnt ha e the right sticker for my fusion 2&1 SE.. lol.. Thanks for the help !!
Just installed one of these in my Element Enduro. After hiking uphill, driving the truck for about 20mins the power cut out completely. And no it wasn't the battery cutoff because the steering wouldn't work either. Motor seemed very hot to touch although I didn't notice the overheat protection flashing on the power LED. Anyway that's the bare bones of what happened...did I miss something on the install/programming? My last two ESCs are/were 1080s so I am used to programming the values in. Any advice would be welcome. Up until that point the new setup seemed mint. Much better than the previous brushed motor I was running before. Cheers!
Hello, I can't say for sure as I sent it back to Hobbywing for testing and I should be getting it back soon. This process has taken almost two months but that's not entirely their fault. Also, some of my misgivings can be attributed to a faulty FS GT3-C that took a while to narrow down that that was indeed the cause of some problems and not the Fusion. In a nutshell my main concern is that it got hot when running and when I asked Hobbywing about this (after they tested mine) they said 'that's normal'. So, sorry my answers isn't so straightforward but if you are buying in the US their customer service is excellent in case something does go wrong. I was dealing with their Chinese HQ and that worked out fine...eventually.@@Japski13
Me too. Just installed and cogging even with wheels down. I did not yet set the cw direction. Other than that, everything else according to the manual.
Hello boss! I would like to know if i can run a 7.2 battery nimh on a fusion se 1800kv? Really curious about it, but if it doesn't work, what battery do i need in order to run it
Any of the LED Box's, internals, are the same. They just have different 'stickers' or labels. So yes, any QR ESC should work with any LED Card, but you have to use the ESC's instruction manual to reference the "Setting Chart" so you know what the numbers are.
Just found this video, I love my HobbyWing Fusion Se and I also have a 1080 ESC and a HobbyWing 5 Slot Brushed Motor for another Crawler. Where Im going with this is I had a Dynamite Programming Card that I used to program my Rig and my Daughters, I just had to follow the directions and settings in the manual. Yes I would rather have a HobbyWing Programer but since they recently stopped including them I just used what I had. The Dynamite Programming Card looks just like the HobbyWing Programer except the instruction sticker on it is different so if you have one and want to use it make sure you follow the settings in the manual.
So, my Fusion SE has worked well for 4 1/2 months, but has now gotten a phanton throttle issue. Tried to rebind multiple RX. recalibrate, motor pairing, but all that has done nothing but change the phantom from reverse to forward. At 5 months since purchase date, do I go through the dealer or from HW?
The Quicrun series of ESCs , including the Fusion SE and Fusion Pro, do "not" work with the LCD Program Box, and "only" work with the LED program Card.
This video is super helpful. I've watched it a few times when ever I need to change the settings for my fusion se. You explained everything really well.
Great explanation of the settings. Thanks!
Fusion Mini for the Trx-4m would be awesome!
Awesome 👌 You hit the nail on the perverbial head...lol the program card the hobbyshop sold me doesnt ha e the right sticker for my fusion 2&1 SE.. lol.. Thanks for the help !!
Love the videos thanknyou for the information! Definitely helpful and very informal! Thank you!!🤙
1to turn 2 to burn. Thanks for sharing this great value fusion se. I'm waiting on DELIVERY of the 1800kv 🇬🇧
Great video I just picked one up for my Element Gatekeeper. What size pinion gear would you use for the 1800kv?
Just installed one of these in my Element Enduro. After hiking uphill, driving the truck for about 20mins the power cut out completely. And no it wasn't the battery cutoff because the steering wouldn't work either. Motor seemed very hot to touch although I didn't notice the overheat protection flashing on the power LED. Anyway that's the bare bones of what happened...did I miss something on the install/programming? My last two ESCs are/were 1080s so I am used to programming the values in. Any advice would be welcome. Up until that point the new setup seemed mint. Much better than the previous brushed motor I was running before. Cheers!
is it working fine now? planning to get one that's why i need your guys feedback about it if its great or not. thanks
Hello, I can't say for sure as I sent it back to Hobbywing for testing and I should be getting it back soon. This process has taken almost two months but that's not entirely their fault.
Also, some of my misgivings can be attributed to a faulty FS GT3-C that took a while to narrow down that that was indeed the cause of some problems and not the Fusion. In a nutshell my main concern is that it got hot when running and when I asked Hobbywing about this (after they tested mine) they said 'that's normal'. So, sorry my answers isn't so straightforward but if you are buying in the US their customer service is excellent in case something does go wrong. I was dealing with their Chinese HQ and that worked out fine...eventually.@@Japski13
Is it true that the pro had better low speed torque than the SE?
What program box I see they have 2 to pick from
Anyone have issues with cogging. When I run mine with no load(holding in the air) it seems to start cogging. And yes I’ve done the motor pairing…🤷♂️
Me too. Just installed and cogging even with wheels down. I did not yet set the cw direction. Other than that, everything else according to the manual.
you need to do motor pairing and throttle calibration at the same time ? hope you notice me . thanks
Just dropped a vid on my SE. it’s awesome ..
My se 1800 kv will be here monday ordered from hobbywing direct!
Hello boss! I would like to know if i can run a 7.2 battery nimh on a fusion se 1800kv? Really curious about it, but if it doesn't work, what battery do i need in order to run it
I got a program card with blue sticker on it, can I still input the same parameters as you did with red sticker?
Maybe a Fusion 2in1 in a 380 size for the UTB 18 ???
So will the 1080 brushed esc program box work with QRun brushless ESC like the 10bl120 sensored THANKS
Any of the LED Box's, internals, are the same. They just have different 'stickers' or labels. So yes, any QR ESC should work with any LED Card, but you have to use the ESC's instruction manual to reference the "Setting Chart" so you know what the numbers are.
@@HOBBYWINGOfficialmuch appreciated 👍 thanks for reply
will this fit a Vanquish VS4-10 without any modifications or trimming of the trans housing?
Hello. It fits the Phoenix RTR, that should be the same basic truck/trans, but would be worth checking with Vanquish directly.
Just found this video, I love my HobbyWing Fusion Se and I also have a 1080 ESC and a HobbyWing 5 Slot Brushed Motor for another Crawler. Where Im going with this is I had a Dynamite Programming Card that I used to program my Rig and my Daughters, I just had to follow the directions and settings in the manual. Yes I would rather have a HobbyWing Programer but since they recently stopped including them I just used what I had. The Dynamite Programming Card looks just like the HobbyWing Programer except the instruction sticker on it is different so if you have one and want to use it make sure you follow the settings in the manual.
So, my Fusion SE has worked well for 4 1/2 months, but has now gotten a phanton throttle issue. Tried to rebind multiple RX. recalibrate, motor pairing, but all that has done nothing but change the phantom from reverse to forward. At 5 months since purchase date, do I go through the dealer or from HW?
Please check your emails. We'v replied. A common topic that has an easy fix. "Servo Test" first then go from there.
I just did that and my motor pairing operation was much quicker then what yours was...
Fusion mini please
👍🎉
Can i use my hobbywing lcd program box with this
The Quicrun series of ESCs , including the Fusion SE and Fusion Pro, do "not" work with the LCD Program Box, and "only" work with the LED program Card.
@@HOBBYWINGOfficial ok thank you