For anyone wondering how to get the PIN code you can either get it from your local dealer for free if your lucky or can try to do a bsi / ECU dump and use a calculator (from eBay for around 20usd) to get the PIN.
@@NiebaumCurran the code is now free for both key cutting and confidential code aslong as you give the registration documents and drivers license to the dealership
it needs to be synce with the car , no need for programming with special method , but some users said that they couldn't make the remote work , maybe because of the keys type they used .
Thanks for the video; I saw it carefully but I still have doubts; for example, it is possible for the car to accept a key that has an identical chip that has already been programmed for another 407 car; must the new keys be virgin or can I use the chip from another key from another car? and virgins, I assume, bring no code; it is the car that programs the PIN code into the key; or simply the car's ECU is programmed to accept a new key with another PIN... One last question; if a car accepts 4 keys all keys must have the same PIN?
The pin is same and it is already programmed in the ecu and you need to know it, you can programmed used key and car will start but remote key will not properly work.
I have Peugeot 207. My remote key is not working.Firstly I thought it might be a battery problem, so I repalced it but no breakthrough. I believe it needs reprogramming. Please advise how so solve this problem. Many thanks
What interface are you using, an official Citroen one or a Pass Thru interface? I was looking into key programming and reprogramming of ecu's via Pass Thru, do you know if this is possible? Thanks in advance!
Hi, i have a question, you know how I can reset/delete/clear the service zone ? Because the program he say 10 service zone and when I want to delete errors he told me is maximum limit, so I cannot delete the error, please help me
Hi. I Have a 406 and my key has worn off. I need to get a new key but i dont have the confidential key code to program. could u provide me with a solution
You need to get the lexia cable from aliexpress or such sites, it comes with the software, for the pin code you need to get it, you can take key code from dealer free if you show registration of car.
Hello i have two car keys with two buttoms (open and close de car). If i buy another carkey(from aliexpress) with 3 buttoms (open /close de car and OPEN THE TRUNK) it is posible to make it works (only the two bottoms or three bottoms?) My car open the trank from inside buttom. My car is a Citroen C3 myway latinoamerica a51i (2013). Thanks a lot. Sorry for my english Good video!
Citroen is Citroen...not citruen. after i heared noise because you dont know how to make an video i agree with my NO like Missing...if you dont know the pin code , is not possible to ad new key.
if you know how to make a video , you must do it by your self , instead of commenting on people whom making video's for teaching people like you , this video for showing how to program car key , not for teaching English or grammar . sleep well .
For anyone wondering how to get the PIN code you can either get it from your local dealer for free if your lucky or can try to do a bsi / ECU dump and use a calculator (from eBay for around 20usd) to get the PIN.
And you mentioned at description, we need pin code of car, how we can find that?
Perfect - I just saved myself a LOT of money by programming a key rather than going to the dealer and getting RIPPED off!
how did you get your car code , so others can know ?
Sorry i already have the code.
joe gig
You can get the code from a dealer, they charged me £20 as my car didn't come with the confidential card when I bought it.
@@NiebaumCurran the code is now free for both key cutting and confidential code aslong as you give the registration documents and drivers license to the dealership
Can this be done for 406 1999 made .?and can we use aftermarket key which says Peugeot?
is there a way to program new peugeot 3008 2020 p84?
do you turn the ignition on after you've loaded the app or before hand?
AFTER
all im getting is no communication with the app loaded then turn ignition on
Hi!
When you program the key imo to start the car, will the remote for lock/unlock work? Or it needs a separate programing?
it needs to be synce with the car , no need for programming with special method , but some users said that they couldn't make the remote work , maybe because of the keys type they used .
Thanks for the video; I saw it carefully but I still have doubts; for example, it is possible for the car to accept a key that has an identical chip that has already been programmed for another 407 car; must the new keys be virgin or can I use the chip from another key from another car? and virgins, I assume, bring no code; it is the car that programs the PIN code into the key; or simply the car's ECU is programmed to accept a new key with another PIN... One last question; if a car accepts 4 keys all keys must have the same PIN?
The pin is same and it is already programmed in the ecu and you need to know it, you can programmed used key and car will start but remote key will not properly work.
@@bigheart205020thanks.... So you think is possible program one Virgin Key and a used Key ONLY with tool DiagBox ?.. The car is a 407 year 2006
Yes
If you have pin code
Hei!
is it possible to read the pin code with X-100PRO?
Hallo, do you installing the diagbox on VMWare or it just compatible with the new version on windows10? Which one OBD II version? Thanks bro
I have Peugeot 207. My remote key is not working.Firstly I thought it might be a battery problem, so I repalced it but no breakthrough. I believe it needs reprogramming. Please advise how so solve this problem. Many thanks
try to syncronize the key with the car, if not working you need the code of your car impolizer then you need a new virgin key , then program it .
thats working only with lexia 3 ?
Hi, where can you get a blank key ready to code?
Aliexpress
@@bigheart205020 thanks. I would be worried about getting a duff key buying off there
@@matthewdavies6722 check the reputation and feedback before buying.
Helo! is it possible to read the pin code with diagbox? what is the option for the pin code?
no
you might be able to get the code from main dealer
What interface are you using, an official Citroen one or a Pass Thru interface? I was looking into key programming and reprogramming of ecu's via Pass Thru, do you know if this is possible? Thanks in advance!
i am using a clone interface 50 $ price
Hi, i have a question, you know how I can reset/delete/clear the service zone ? Because the program he say 10 service zone and when I want to delete errors he told me is maximum limit, so I cannot delete the error, please help me
Im have a programming failed for what?? im need help please:'(
Hello! I have a Peugeot 508 and lost my key; need to programm a second one. What software do I need exactly and what OBD is the best? 🙏 thanks!
diagbox v7 or pp2000 any of this two software can be used , for the best obd see others videos at my channel there is a video showing that .
bigheart2050 thank you!
If i take a key form dismantling, ken i learn it with the car?
Hi. I Have a 406 and my key has worn off. I need to get a new key but i dont have the confidential key code to program. could u provide me with a solution
Obdstar H108 unit could extract it from the car. 😉
With this program i can program new keys? I need to buy lexia? Can u send me the software?
search online , it is available
@@bigheart205020 yah but wich cable i need to buy ? And this can read all the secret code pin? Can this work for peugeout 307 from 2002?
You need to get the lexia cable from aliexpress or such sites, it comes with the software, for the pin code you need to get it, you can take key code from dealer free if you show registration of car.
Hi, I have a Peugeot 407 and need to program my car key. Where can I download this software and will an ELM327 interface work, thanks
joe gigliotti no you will need the pp2000/lexia scanner that you can buy in eBay or ali express
hmmm, if i have not the pin code?? can't program new keys ??--
You can try getting the 4-pin code with Obdstar H108 unit. 😉
What is the difference between ignition positive (+APC) and ignition positive (IGN+)?
Hi did you ever find out
How i ger the key code?
search online
but where? i didn't find anything
If I program a new key, will it need to be sync? Only the new one or all the keys?
Ricardo Santos all keys must reprogram at same time
I have only one key. If i will program new key, old key wont work any more?
program both key . both will work . just follow steps
I read in internet that old key is not able to program.
old key cant be used at new car for remote . it will not work .u need a new virgin key.but ur own old key will work.ok
Yes but when ill program new key i have to write in pp2000 that i need program '' 1'' key?
Hello @bigheart2050. Great video. How did you install diagbox v07. 02 on win 10? Can you help me please please? ...
On win 10?
Hello i have two car keys with two buttoms (open and close de car). If i buy another carkey(from aliexpress) with 3 buttoms (open /close de car and OPEN THE TRUNK) it is posible to make it works (only the two bottoms or three bottoms?)
My car open the trank from inside buttom.
My car is a Citroen C3 myway latinoamerica a51i (2013).
Thanks a lot.
Sorry for my english
Good video!
you can try to enable this option , in some cars it can be done , you can try that .
What Option? learn with diagbox directly new key(with 3 buttoms)? thanks
hello how can we find the code I searched on the internet but I was able to find 5 digit numbers, can you just help me ..
Obdstar H108 unit could extract it from the car. 😉
hi can you help me to make vin number to Pin.
not available now . search in google maybe you find
+bigheart2050 nothing on Google. tanks
+Deniz Koylu search for vin to pin . you will find . make sure it is trust service and you will be fine
+bigheart2050 I can not find anything that works. can you help me with a link that works.
+Deniz Koylu i will tom ok
How to get the friggin key code when its lost? It seems impossible and fuckin expensive?
thank you very much
heplfull
اهلا وسهلا
تسلم
yes
Gracias me ha sido de gran ayuda!
Citroen is Citroen...not citruen.
after i heared noise because you dont know how to make an video i agree with my NO like
Missing...if you dont know the pin code , is not possible to ad new key.
if you know how to make a video , you must do it by your self , instead of commenting on people whom making video's for teaching people like you , this video for showing how to program car key , not for teaching English or grammar . sleep well .