THIS IS THE VIDEO I BEEN LOOKING FOR SINCE GETTING THE CAR. I WENT TO DEALER AND THEY SAID THEY DIDNT HAVE A KIT BUT I SWEAR I FOUND THE TRANSMITTER AND KEY AND ETC. I WANTED THE FACTORY KEY NOT AFTERMARKET. YOU ARE A GOD SEND. IM TIRED OF LOCKING MY KEYS IS CAUSE IM USED TO MY OTHER CAR NOT LOCKING IF I LEFT THEM IN
I took a bus about 300mi with my wife in order to purchase the 2024 m/t Versa. Great car. Excellent video, btw. If you're interested in improving your handling, i recommend to look up 'Ultra Racing Malaysia" and search for parts for the "N18 Nissan Almera". They have a set of seven parts for chassis tuning our car. Front strut tower bar, rear sway bar, brace between lower control arms, two braces to secure outer frame to tunnel, bar between rear shocks, and bar inside rear bumper body area. I paid about 650$ for the set and 550$ for the shipping from Malaysia to USA. Pricey, yes. But i can whip it around the roundabout and cornering is so stable... I noticed today that a 'fixed' pothole near my house is almost imperceptible at 60. Frame stiffening not only improves handling, but will also support the cars' body and frame, making it more resistant to fatigue and wear... and improving the 'crash test rate success' is a foregone conclusion with the additional bracing. Thanks again for the info in your video. Best of luck to you in your adventures!
Did you try the trick of turning the key twice to lock or unlock all doors, instead of only the driver's door? The owner's manual mentions this feature, but doesn't say which models it's available on.
I’m sure you could use a cheaper knockoff Amazon key. I didn’t want to deal with any potential headaches. A Nissan dealership might also deny programming it since it is not an officially branded key.
Inserting the key is part of the key learning process. You need the key blade with it. There is a way to program just a fob but you have to trick it with a cut key. A dealership will not do that for you.
I went to Nissan dealer to asked them to install a 2 way remote starter for Nissan Versa 2024.. And Yes not applicable because it is not equip with what not. Winter season is coming and will be a big problem.. so dissappointing.. by the way it is my first car and a novice driver😢
There is a way to add just a remote fob but it will be hard to find someone that will do it. The dealer won’t. Having the key is part of the programming process.
Nice tips! Thanks for sharing.
just left the dealership with my key successfully programmed. THANK YOU
Heck yeah!
THIS IS THE VIDEO I BEEN LOOKING FOR SINCE GETTING THE CAR. I WENT TO DEALER AND THEY SAID THEY DIDNT HAVE A KIT BUT I SWEAR I FOUND THE TRANSMITTER AND KEY AND ETC. I WANTED THE FACTORY KEY NOT AFTERMARKET. YOU ARE A GOD SEND. IM TIRED OF LOCKING MY KEYS IS CAUSE IM USED TO MY OTHER CAR NOT LOCKING IF I LEFT THEM IN
Thanks for making this video. It is very helpful
I took a bus about 300mi with my wife in order to purchase the 2024 m/t Versa. Great car. Excellent video, btw.
If you're interested in improving your handling, i recommend to look up 'Ultra Racing Malaysia" and search for parts for the "N18 Nissan Almera". They have a set of seven parts for chassis tuning our car.
Front strut tower bar, rear sway bar, brace between lower control arms, two braces to secure outer frame to tunnel, bar between rear shocks, and bar inside rear bumper body area.
I paid about 650$ for the set and 550$ for the shipping from Malaysia to USA.
Pricey, yes. But i can whip it around the roundabout and cornering is so stable...
I noticed today that a 'fixed' pothole near my house is almost imperceptible at 60.
Frame stiffening not only improves handling, but will also support the cars' body and frame, making it more resistant to fatigue and wear... and improving the 'crash test rate success' is a foregone conclusion with the additional bracing.
Thanks again for the info in your video. Best of luck to you in your adventures!
I’ll have to check it out. This is just my daily car, so more than likely it will stay stock. I have a different car for twisty roads. ;)
Did you try the trick of turning the key twice to lock or unlock all doors, instead of only the driver's door? The owner's manual mentions this feature, but doesn't say which models it's available on.
I have tried. That does not work on the base model.
couldnt a aftermarket key work aswell? since it still has the system to add a key?
I’m sure you could use a cheaper knockoff Amazon key. I didn’t want to deal with any potential headaches. A Nissan dealership might also deny programming it since it is not an officially branded key.
@ do u have the fccid ? or year make model of the key?
@@Rxckstarrrr the model number is in the video and I also posted it in the description.
@@TBAGTOM yeah im trynna search the same one , i can only find the push to start when i search up not the switch
I was confused too
About?
this will work even if its an automatic, correct?
Yes it will. I just happen to have a 5-speed.
@@TBAGTOM Alright I'm going to give it a shot on my little bros new Versa, thanks a lot man!
@@5lug let me know how it goes.
can you do this without the blade key and just buy the remote?
Inserting the key is part of the key learning process. You need the key blade with it. There is a way to program just a fob but you have to trick it with a cut key. A dealership will not do that for you.
@@TBAGTOMwhat kind of pin did you use to lock the key into the fob?
@@lambsossthe blade I bought came with some kind of pin. I just trimmed it and smashed it in.
@@TBAGTOM thanks
I went to Nissan dealer to asked them to install a 2 way remote starter for Nissan Versa 2024.. And Yes not applicable because it is not equip with what not. Winter season is coming and will be a big problem.. so dissappointing.. by the way it is my first car and a novice driver😢
Is your car a manual or an automatic? If it’s an automatic you can have an aftermarket company install a remote starter.
Telescope steering wheel?
Yes. Manually telescoping.
I there a remote only available without a key?
There is a way to add just a remote fob but it will be hard to find someone that will do it. The dealer won’t. Having the key is part of the programming process.