Driving the Mini "Diff" Trike! (Mistakes were made...)
HTML-код
- Опубликовано: 11 фев 2022
- DIFF PARTS:
Differential - www.staton-inc.com/store/inde...
Sprocket - www.staton-inc.com/store/inde...
Brake - www.staton-inc.com/store/inde...
Bolts - www.staton-inc.com/store/inde...
Axle Nuts - www.staton-inc.com/store/inde...
BUILD PARTS:
Leading Link Forks - www.gopowersports.com/minibik...
Handlebar Clamps - www.gopowersports.com/7-8-han...
Handlebars - www.gopowersports.com/mini-bi...
Brakes - www.gopowersports.com/mini-bi...
Bearing Hangers - www.gopowersports.com/3-hole-...
11” 5/8” Jackshaft - www.gopowersports.com/5-8-thr...
Jackshaft Nut - www.gopowersports.com/5-8-jac...
Jackshaft Brackets - www.gopowersports.com/adjusta...
5/8” Jackshaft collars - www.gopowersports.com/jacksha...
Jackshaft Sprockets ⅝ 12T #40 - www.gopowersports.com/12t-jac...
⅝” Bearings - www.gopowersports.com/5-8-id-...
Rear Wheel/Tires - www.gopowersports.com/13-x-5-...
Front Wheel - www.gopowersports.com/10-blac...
Front Tire - www.gopowersports.com/3-00-10...
#40 chain 5ft length - www.gopowersports.com/40-chai...
Engine Plate - www.gopowersports.com/predato...
22mm Mikuni - www.gopowersports.com/22mm-mi...
Header - www.gopowersports.com/header-...
Muffler - www.gopowersports.com/rlv-411...
Throttle Cable - www.gopowersports.com/40-miku...
Gas Tank Bracket - www.gopowersports.com/lil-ras...
Gas Tank - www.gopowersports.com/gas-tan...
Gas Shutoff - www.gopowersports.com/shut-of...
1” Lock Collars - www.gopowersports.com/axle-lo...
Seat - www.gopowersports.com/12-mini...
Twist Grip - www.gopowersports.com/throttl...
Kill Switch - www.gopowersports.com/mega-mi...
Build Break Repeat is Proudly Sponsored by GoPowerSports 
Авто/Мото
You made a three wheeler more prone to flip than they made in the 80s. Hard to slide when the outside tire isn't spinning.
Rear axle flex isn't a "bug" it's a suspension "feature" hehe
Until it breaks at the diff and sends chunks of cast aluminum flying
Take it on the next visit to North Carolina, I bet it could get in the current Top 10 board around the Cars and Cameras Grand Prix
Awesome build boys! Wheelie machine!!!
This is a cool build.
This is a sweet build. It will look great once its painted!!
Pop a wheelie!!! Looks like fun- good job!
Pretty dang cool build guys 🔥
Funny how by time you finished riding it was ready to have the bars re set , they are pulled back a long ways
I wanna ride it. That makes it a win in my book.
I “upgraded” my vm22 to a 24mm flat slide mikuni b had nothing but problems, no jetting worked for me, swapped back to a vm22 n boom. Fixed.
Pretty sweet build! If you want to have less "open" of a diff, use high weight diff fluid like 1M, it will slow down the diff gears spinning and allow you to do less one-wheel-peel and one wheel braking.
I never heard the converter "shift" on the speed runs - might be a little to gain with some converter driven spring tuning.
Another Winning build guys.Glad you're using the original music.Anyone who hears say,"BBR posted again??"Plus I always liked the tune.
You figured out how to make a motorized drift trike into a holder of the world record for slowest lamest donuts ever
Try to put a chain guard on the back.
I'm curious about your front fork how well does it work?
Front pegs need to be forward a lil bit
It seems like every time I roll a J I end up binge watching these
Needs a Wheelie bar!
Please use that rear brake when wheeling that thing. You're gonna bust your coconut. One tap of that brake will put the front end down.
Great Work Again Guys.
Just curious. Is there something special about different shoes? It looks like you only got one of your old riding shoes on. Did you get a little excited to ride & forget to change the other one? Happens to me all the time. Glad to see the great projects. Keep up the good work!!
Actually the sole peeled off my other shoe, it’s quite the look though!
Add bearings near to tyres and merge into foot rests instead of pegs 👽
What’s with the Mis matched shoes? 😂
I would seriously consider putting a wheelie bar on it before someone gets hurt. Otherwise a great build.
Just sleeve your damn rear tires. Pvc or polyethylene pipe and then your slide and still be able to enjoy the diff!
It needs to be bright pink
LSD would be cool and probably stop the non contact wheel spinning up so bad
It’s the 3 Rs for me rig ride repeat
Completely off topic: but when you change the stock valve springs for 18lb springs in a predator 212 should it be a lot harder to pull start? Anyone? Thanks in advance.
It shouldn't matter too much tbh. Compression makes it harder to pull, valves aren't all that heavy.
I’m pretty sure I got the wrong springs. I put the Honda springs in it and they’re a bit longer and now it’s hard to pull. I haven’t ran it yet because I messed up the gasket removing the governor so waiting for a new one of those and the shorter 18lb springs now.
@@GratefulEd907 did you lash the valves I've 37 lb springs in a few motors as long as you set the lash correctly it don't pull any harder then stock 30 thousands is a good start and did you lap them to make sure the seat properly?
@@heathenprojects2639 I did set the lash but not lapped
@@GratefulEd907 hemi and non hemi springs are different but I always lap them with compound to make sure they seat I've had tiny metal shaving from breaking a new motor in stick valve before you might also look into a head gasket kit you can bump your compression with a copper gasket kit gain almost a half a horse for just a few bucks
Hey guys. I really like your mini quad build. Do you guys think you could sell it to me? Please reply. Thank you!
Just lock the rear end. Problem solved!