After years of refusing to take my controllers apart and fix this issue and instead throwing them away..I’ve finally just finished doing this fix. My controller was drifting down and left before. Now it drifts to the left lmao. Thanks man! Gonna give it a go on the other controllers
i came to this video seeking help, read the comments about bashing the controller.. decided “ahh why not?”, bashed the controller and now it works. thanks boys lmao
Did this on my Xbox One S controller and it fixed the drift for me. Can't say if it will translate to others as I see a few comments saying that it made their controllers worse. A few notes on this video. To take off the two back face plates use a flat head screw driver to pry them off. Start at the bottom of the controller and work around the seam(you will hear the clips come off as you go). Then the reason the screws took forever to get off is they are security screws, so you need a T Security Bit and drill to easily take them off. I believe the size I used was a T8. Then a flat head should take off the plastic piece on the inside.
Don’t try this, it will ruin the Joystick, that piece is there for a reason and the reason is to maintain the arm that pushes the L3 and R3 (depending on which joystick you are talking about) in place no matter how far is the Joystick pushed, Missisng that plastic clip will totally ruin the L3/R3.
Aussie Sloth Aussie Sloth Take apart the controller carefully without damaging any screws (use the torx or security torx screwdriver you can find it cheap at Amazon) tear down the controller so you can easily get to the Joysticks themselves (the iron boxes with the actual grey sticks) you’ll see two little green boxes on each Joystick ( those are the sensors that tell the motherboard what direccion the Joysticks are pointing ) been one for the X axes and the other for the Y axes. After you identify those boxes carefully try to separate them from the metal box but be really really careful not to break the plastic clips or the soldering at the button of the green boxes. You can do it without damaging the motherboard and the soldering. After you CAREFULLY separated the green boxes you’ll se little round metal claws that tells that sensor which direccion the Joystick is pushing, be very careful and remember how that round piece is facing so you can reassemble the mechanisms the exact same way ( take a picture) clean the circular metal piece and reassemble the whole mechanism ( you can also try to clean the little Flex peace inside the green box that the circle claw is touching and is what tell the motherboard what to do. Once you have it all in place reassemble the controller so you can try it out, if the problem persist back out and try some more cleaning.
[Alternative - First Aid Solution] Take a Straw, Flatten it so it looks like this [] fit it in the analog stick from the side while holding it down and blow really-really hard from the other end of the straw (or pull air, up to you... but be careful... and don't overdo it). Enjoy a Drift-Free experience along with a really bad headache for a moment. PS: Join Us if that Helped ^^ I made a video out of it recently too in case you need a visual guidance ^^
I didn’t think this would I actually work. I was going throw the controller away because it had drift until I watched this video and it fixed it. Thank you man.
I watched this video and the decision was made right then and there that I couldn’t dedicate my time to this and at that very moment I made the selfish decision to buy myself a new controller. I might actually be at Walmart when they open at 7am, because this was an entertaining nightmare that I almost put myself through. Thank you for the clarity that you have given me. This is what I needed. 🙏🏾
I'm just tired of buying controllers, 90 day warranty is trash. Just order some kits on Amazon and fix them yourself, better than spending $65 every 3 months. And you can customize them however you want.
You don’t need to remove anything just spray electronic contact cleaner a few times in the joystick assembly then move joystick around and spray it again. Repeat process a few times then reassemble the controller it will work, I did it to mine and it works like new again.
*Pro Tip: If Controller Drift Is Making It Hard To Type Because It Keeps Going To The Autofill, It Really Helps To Hold The Joystick On The Right Side Down While Typing. It Can Never Go To The Autofill If That Joystick Is Being Pushed Down. Your Welcome.*
mine does that but it goes to the right and its so annoying while typing cause it whole automatically go to the suggested words half way and ill accidentally press on those and it whole be nothing like the word I was originally typing
Can't believe this is still a problem. Had an xb1 4 or 5 years ago and my controllers drifted. Bought a new xb1 this week and the controller also drifts.
It's after using it for a while. Usually it's 200-300+ hours. If you just bought it and have used it less than 100 hours you should be able to return it...
you can send the controller back where you got it from if its under a year or 3 months warranty but if that doesnt work try rubbing alcohol for it and it should work
Bro, I came back to this video after 7 MONTHS, and it happened again, with the same controller but worse. So I took my teeth and pulled the button that was stuck and it worked. 😌 *SERIOUSLY* I'm not joking, try this if you have to!!
Hey i like a range of games and completely respect your opinion the board game shown in the video was a gift and i thought it would look nice with the rest of my gaming memorabilia
guys this guy isnt lying this actually fixed mine but pressing the stick in it abit weird but yeah it works and you need to be really careful whiles doing it
Thanks a bunch! I removed the gray piece, and it didn't work... but upon closer inspection I found that there was a tiny gray piece stuck inside the thumbstick behind the larger gray piece you showed. Seems like it had broken off the gray piece. Once I removed that, both joysticks started working again with only very minor drift on the left thumbstick (the one where the gray piece was stuck).
While you got open buy buttons and thumb stick my controller look amazing with greem buttons and chrome green metal thumb sticks im doin the 0603 led mod next
So this fixed the drift problem but now when i push down on my left stick it sometimes gets stuck and requires me to pull it up how should i go about fixing this?
I recommend taking the controller apart then checking to see if any parts are stuck under the joystick itself if not, make sure to check if the joystick/shell is clean
The diagnostics have a very high deadzone size (I think something like 24%) but many games are as low as 15% on their settings (possibly even more for some?). Download the xbox game controller test app and you can test at 15% to see where it likely will be set for games like Apex Legends and Outer Worlds. www.microsoft.com/en-us/p/game-controller-tester/9nblggh4pnc7?activetab=pivot:overviewtab
@@zSirMonkey do not follow the instructions in the video.That piece is put in place for a reason and though removing it might appear to resolve some issues in the short run it will cause more undo issues in the long run. Best to simply find someone that does repairs and have them fix it. Likely they will change out the analog stick joystick. They aren't that expensive and usually run about $1 each. www.amazon.com/Onyehn-Joystick-Wireless-Replacement-Controller/dp/B07NM7GW91/ref=pd_cp_147_3/142-6989727-9138544?_encoding=UTF8&pd_rd_i=B07NM7GW91&pd_rd_r=9653c1af-720f-46f9-86e6-2fe1709ce9d2&pd_rd_w=dyBWt&pd_rd_wg=Zcngh&pf_rd_p=592dc715-8438-4207-b7fa-4c7afdeb6112&pf_rd_r=NXP0MA2PZMB5VC51VMC0&psc=1&refRID=NXP0MA2PZMB5VC51VMC0
Great video. I attempted to do this and yes it fixes the drift issue. But if its happening to the right joystick near the XYAB buttons don't remove the gray tab as it causes your remote to spin. Just my two cents
STOP! Before you take your controller completely apart or fill it with isopropyl alcohol - try this! You'll have to at least take off the face plate for this method. 1. Open 2. Go to the problematic controll stick and lodge (something skinny preferably) into the green piece that is affected. 3. Push it back (only a little and not too hard) 4. Check if the controller is working! It worked for me just now lmao
i slammed my controller to the ground and it exploded and i don’t have another controller besides 1 that has crazy stuck drift and i don’t got money so ima try to fix this one and if it don’t work then i’m fucked
@@masatodoxey771 the answer is i why would i want to take apart a functioning xbox controller which are expensive and remove a factory set piece on it if it has no issues it would just be pointless
Aight, not saying it’s always the best, but just absolutely yeet it at the wall or floor and should do the trick
i tried this and now my joystick is in half
Tell me why that actually worked
I did this and now my controller is in 16 pieces
It used to work
dont do this you might get the bumpers stuck lol
This is actually fake, the Xbox controllers were paid actors.
RdG HuSky because it was a joke
RdG HuSky ok 25 subs
RdG HuSky first I did upload Minecraft but was bad so I deleted it second I’m actually trying
@@Che4p When you edit a comment the heart goes away so he hearted the edited version
RdG HuSky maybe he made a spelling mistake and fixed it, plus dumbo isn’t a word
So we not gonna talk about how this man unironically bought monoply fortnite
It was a gift from a while back thought it looked nice in my collection, guess not :(
@@Splifflix nah its good
RedAssassin 0821
fuck you dude, I hate everybody who says Fortnite is trash or Fortnite is bad
that’s your fucking opinion.
@@BuisTruis eh fortnites the best game to ever happen in the past 5 years realistically if we talk statistics
ExaUstFN nah it’s gay
After years of refusing to take my controllers apart and fix this issue and instead throwing them away..I’ve finally just finished doing this fix. My controller was drifting down and left before. Now it drifts to the left lmao. Thanks man! Gonna give it a go on the other controllers
i came to this video seeking help, read the comments about bashing the controller.. decided “ahh why not?”, bashed the controller and now it works. thanks boys lmao
Did this on my Xbox One S controller and it fixed the drift for me. Can't say if it will translate to others as I see a few comments saying that it made their controllers worse. A few notes on this video. To take off the two back face plates use a flat head screw driver to pry them off. Start at the bottom of the controller and work around the seam(you will hear the clips come off as you go). Then the reason the screws took forever to get off is they are security screws, so you need a T Security Bit and drill to easily take them off. I believe the size I used was a T8. Then a flat head should take off the plastic piece on the inside.
I just trashed my controller and no more controller drift
Dont listen to this idiot he doesnt know what hes talking about
This actually works lol
Ya, You all sound soo smart.
Thrashing my controller caused the drift in the first place, I feel.
@@kevinnorris6558 definitely that why my drifts as well most likely
This dude watched a RUclips on how to fix controller drift then made a video on how to fix controller drift lmao
2000 iq
Says the person with no content
@@zstacti stop veering away from the subject
@@zstacti you don’t have any either and yes I know I don’t have any
I saw that too😂 just send us the link for that video
Thank you so much dude, while I was fixing mine I was afraid I’d break it but now it works like it is brand new. Thanks!
No problem! I hope you enjoyed!
Dude literally didnt show use any footage of him actually fixing the controller! 🤦🏾♂️
Don’t try this, it will ruin the Joystick, that piece is there for a reason and the reason is to maintain the arm that pushes the L3 and R3 (depending on which joystick you are talking about) in place no matter how far is the Joystick pushed, Missisng that plastic clip will totally ruin the L3/R3.
Samus Aran so what should we do instead??
Aussie Sloth Aussie Sloth Take apart the controller carefully without damaging any screws (use the torx or security torx screwdriver you can find it cheap at Amazon) tear down the controller so you can easily get to the Joysticks themselves (the iron boxes with the actual grey sticks) you’ll see two little green boxes on each Joystick ( those are the sensors that tell the motherboard what direccion the Joysticks are pointing ) been one for the X axes and the other for the Y axes. After you identify those boxes carefully try to separate them from the metal box but be really really careful not to break the plastic clips or the soldering at the button of the green boxes. You can do it without damaging the motherboard and the soldering. After you CAREFULLY separated the green boxes you’ll se little round metal claws that tells that sensor which direccion the Joystick is pushing, be very careful and remember how that round piece is facing so you can reassemble the mechanisms the exact same way ( take a picture) clean the circular metal piece and reassemble the whole mechanism ( you can also try to clean the little Flex peace inside the green box that the circle claw is touching and is what tell the motherboard what to do. Once you have it all in place reassemble the controller so you can try it out, if the problem persist back out and try some more cleaning.
Samus Aran could you possibly repeat that for me in a lazy mans language
Sensei Jay I heard the same thing I also heard rubbing alchemy is a good temporary fix
here’s a tip: skip the initial 5 min monologue and actually show the controller disassembly
I completely agree. Dude just wants views
@@kfaughter4350 i mean ur still here to fix ur controller…
@@saucygogeta186 to be fair
He needs the monies
Skip the video all together and find a more useful "how-to". All this camera shake just gave me a headache and my controller drift is not even fixed.
@@TheConkyDragon yeah I just bought a new damn controller
[Alternative - First Aid Solution]
Take a Straw, Flatten it so it looks like this []
fit it in the analog stick from the side while holding it down and blow really-really hard from the other end of the straw (or pull air, up to you... but be careful... and don't overdo it).
Enjoy a Drift-Free experience along with a really bad headache for a moment.
PS: Join Us if that Helped ^^
I made a video out of it recently too in case you need a visual guidance ^^
TwinDenis HOLY SHIT IT WORKED :0 tysm it was much easier than doing his method
Dude it actually worked I am so happy thank u
Wow I’m so happy I read the comments
iTz Bam are you all bullshittin or it real?
Preston Garvy I ain’t it works
Dude I did this, and cleaned it up and it made it worse than before because it's now happening to both of the sticks instead of just one
Lol doing this has a 0% chance of messing up the other stick
@@DebugMaster1234 well It did because it was fine before I did this and I didn't drop the controller or damage it while doing this
@@DebugMaster1234 this is true, I know they aren't made with the best quality
Same
Waggysaurus yup totally bout to spend $130+ on a controller yup totally
Didn‘t think a small plastic piece would fix this. Thanks
I didn’t think this would I actually work. I was going throw the controller away because it had drift until I watched this video and it fixed it. Thank you man.
Thanks for helping me break my controller even more!
Ouch!
Damn😂
you probably didn't do it the right way and plus that's on you for clicking on the video even if that was true
Yup my sprint doesn’t work
He said your welcome
I watched this video and the decision was made right then and there that I couldn’t dedicate my time to this and at that very moment I made the selfish decision to buy myself a new controller. I might actually be at Walmart when they open at 7am, because this was an entertaining nightmare that I almost put myself through. Thank you for the clarity that you have given me. This is what I needed. 🙏🏾
I'm just tired of buying controllers, 90 day warranty is trash. Just order some kits on Amazon and fix them yourself, better than spending $65 every 3 months. And you can customize them however you want.
@@MATIKKMUZIK101 what's the kit you recommend
You don’t need to remove anything just spray electronic contact cleaner a few times in the joystick assembly then move joystick around and spray it again. Repeat process a few times then reassemble the controller it will work, I did it to mine and it works like new again.
Alcohol should also work somewhat
@@gamertardguardian1299 I tried it in my xbox series controller and it worked. Thx
I was SO confused when my character started looking up in minecraft for no reason. Thanks for the help.
No problem 👌
yea same
if it doesnt work or your not bothered to, just get your palm and hit the joystick, it worked for me ;)
Yes it fixed the drift on the controller, but it caused a bunch of other problems by removing those clamps.
Yeah, like using L3 clicking the stick down
This is the first one that actully worked thank you.
how much were you paid to say this
@@snofoding-3730 I wish I was paid to say that.
Dude literally watched a youtube tutorial mid way through the video 😂 😂
Lmao
That's funny it's like watching a dentist watching how to remove a cavity
@@Xeryz2818TTV 😂
Lmaoo he did??😭😭
My guy saved me from throwing anymore controllers away now I can start fixing the others!
Thank you this helped me a lot when I fixed mine literally 2 minutes ago
No one actually shows how to remove that plastic bit ffs
Lord Adz true
Lord Adz exactly how can I remove it ??
@@osama7611 don't know didn't try afterwards
Lord Adz just did it and It didn’t fix the problem my aim is still fucked up
Ill upload a vid on my channel soon if u want 2 know how to remove it
I got some needle nose pliers and pulled everything out of the right joy stick
Thank you so much this fixed it perfectly my stick drift was getting terrible too 🙂
The fact that you have soo many views means XBOX has a problem with there controllers. Great videos
I LOVE YOU! That stupid little grey piece getting removed just fixed a brand new controller!!!
Great Job, I have seven controllers with bad drift, and a couple just flop around, so I'll be fixing these all day. Saves me a few hundred dollars.👍
*Pro Tip: If Controller Drift Is Making It Hard To Type Because It Keeps Going To The Autofill, It Really Helps To Hold The Joystick On The Right Side Down While Typing. It Can Never Go To The Autofill If That Joystick Is Being Pushed Down. Your Welcome.*
Thank you
Oh my god thank you
mine does that but it goes to the right and its so annoying while typing cause it whole automatically go to the suggested words half way and ill accidentally press on those and it whole be nothing like the word I was originally typing
Same
same, it seems no one else has this problem but us
Andrew Gow & me. I bought the screwdriver for it 🤦🏻♂️ . Kinda dumb that you need a special screwdriver just to open a 70$ Xbox controller
this guy spent so much time trying to prove it has drift like brodie i believe you
Took out that piece. so much worse now
yup.
That’s a big rip it worked for me
@@andyk0646 for real?
@@clash850 works for me too, but haven't thoroughly tested it yet, since it's the second controller that is used the least...
Well my spring doesn’t work
Ayee all I did was drop the controller and now it's fixed :D
Thanks that fixed it thanks
I dropped and not worked
God bless y’all! The Lord is always by your side no matter what!
nah
bro thank you so much
my xbox controller has been drifting for so long and the videos that i find dont help so thanks you just saved me money lol
My controller was drifting its fixed thank you for your help for my son.
Can't believe this is still a problem. Had an xb1 4 or 5 years ago and my controllers drifted. Bought a new xb1 this week and the controller also drifts.
bibi green same!!! I bought a new controller so the drift could stop but the new controller drifts to!!!
It's after using it for a while. Usually it's 200-300+ hours. If you just bought it and have used it less than 100 hours you should be able to return it...
Got one for Christmas and had the SAME problem but a found a legit vid that works and u don’t even to open the controller :)
@@zionmodgd6942 the one where the guy uses a q-tip and alcohol? For me it helped but it still drifts. Should try again maybe.
ZionMod Gd What is it??????
This video is all over the place lol, I just wanna play Siege
Thanks my controller is even more broken now.
@NerdWorldNinja FoldingSpaceTime Bro, it's gamer sweat!
@NerdWorldNinja FoldingSpaceTime if your mad just say dat
you can send the controller back where you got it from if its under a year or 3 months warranty but if that doesnt work try rubbing alcohol for it and it should work
Bro, I came back to this video after 7 MONTHS, and it happened again, with the same controller but worse. So I took my teeth and pulled the button that was stuck and it worked. 😌 *SERIOUSLY* I'm not joking, try this if you have to!!
Careful.. He likes Fortnite.
So? Do you have a problem with that?
@@PlusTheFrog ikr hate it when people say this type of shit, would you like it if i talk shit about minecraft?
It’s a joke learn how to take one
Hey i like a range of games and completely respect your opinion the board game shown in the video was a gift and i thought it would look nice with the rest of my gaming memorabilia
Imma say fuck fortnite
It took like 2 hours but it finally worked it took away about 90 percent of the drift
The hardest thing for me was to remove the back plastic part below the triggers, than to fix it LOL
Thank you SO MUCH FOR THE XBOX ACCESSORIES WORKED!!
guys this guy isnt lying this actually fixed mine but pressing the stick in it abit weird but yeah it works and you need to be really careful whiles doing it
the things we do for aim assist...
Thank you so much this actually work now I can fix my other three stick drift controllers😂👍👍👍👍👍👍👍👍👍
my controller doesn’t have a drift but it doesn’t move upwards sometimes
Same have you found a fix
That’s called drift, it’s prolly just the first stage of happening
Same here. Brand new controller too the newest camo one they came out with. About to open mine up and see what’s up
1st stage of drift
says he would take the controller apart with us, completely doesnt do it lmfao, love it
Guys!!!! It's working, thank you bro!!!!
I pulled it up and blew on it and somehow worked
The Police bro I love you
I can't pay attention with all that bang in the background 😂😂😂
Ikr I though I was the only one that heard it
I just blew into the sticks crack 😂
Alfie Playz me too lol
Alfie Playz lmao this actually worked
Why the FUCK does it not work for me
Tf is worked for me
WHY DOES THIS WORK LMAO😂😂
Well this kinda helped the app shows you what to fix which I didn’t know so
Thx
Thanks a bunch!
I removed the gray piece, and it didn't work... but upon closer inspection I found that there was a tiny gray piece stuck inside the thumbstick behind the larger gray piece you showed. Seems like it had broken off the gray piece. Once I removed that, both joysticks started working again with only very minor drift on the left thumbstick (the one where the gray piece was stuck).
what are those screw drivers u use to unscrew the screws on the controller
T6 and t8 1.99 ebay
While you got open buy buttons and thumb stick my controller look amazing with greem buttons and chrome green metal thumb sticks im doin the 0603 led mod next
Torx
You can also pick them up at the hardware store, I got a whole set super cheap at harbor freight, but whatever's clever
It’s common
So this fixed the drift problem but now when i push down on my left stick it sometimes gets stuck and requires me to pull it up how should i go about fixing this?
I recommend taking the controller apart then checking to see if any parts are stuck under the joystick itself if not, make sure to check if the joystick/shell is clean
@@Splifflix I did that it doesnt change anything. If I buy new joysticks Will that fix the problem
@@yoelsamson759 it should if you do it right
Same thing happened to me. I checked everything and it was good. But the problem wasn’t fixed so I replaced the joystick module
@@beebsbeebs2585 did it fix when u replaced to joysticks
Mine won’t show on the diagnostics but when I’m in game it just starts drifting up
The diagnostics have a very high deadzone size (I think something like 24%) but many games are as low as 15% on their settings (possibly even more for some?). Download the xbox game controller test app and you can test at 15% to see where it likely will be set for games like Apex Legends and Outer Worlds. www.microsoft.com/en-us/p/game-controller-tester/9nblggh4pnc7?activetab=pivot:overviewtab
@@BloodofHeroes hey i did it and i do have the drift do i just do what he did or what?
@@zSirMonkey do not follow the instructions in the video.That piece is put in place for a reason and though removing it might appear to resolve some issues in the short run it will cause more undo issues in the long run. Best to simply find someone that does repairs and have them fix it. Likely they will change out the analog stick joystick. They aren't that expensive and usually run about $1 each. www.amazon.com/Onyehn-Joystick-Wireless-Replacement-Controller/dp/B07NM7GW91/ref=pd_cp_147_3/142-6989727-9138544?_encoding=UTF8&pd_rd_i=B07NM7GW91&pd_rd_r=9653c1af-720f-46f9-86e6-2fe1709ce9d2&pd_rd_w=dyBWt&pd_rd_wg=Zcngh&pf_rd_p=592dc715-8438-4207-b7fa-4c7afdeb6112&pf_rd_r=NXP0MA2PZMB5VC51VMC0&psc=1&refRID=NXP0MA2PZMB5VC51VMC0
Thank you soo mutch when I break a controller or it gets stuck drift my dad shouts at me but you just saved my life thank you so much
My controllers drift is on both of my joystick and the d pad moves a lot as well when I press it
Whenever I click down on my left stick nothing happens how do I fix?
Lmao this doesn’t work it just messes up the stick when you click down and try to run in games,not fortnite because that game sucks
@@BuisTruis you sound salty as fuck
That part is what makes your controller click of left or right side
Just buy a new controller, drifting is too fucking common on xbox controllers anyway
Same here. I haven't found anyone else with the same problem so there's no person showing how to fix it
You can see his reflection in the tv touch the controller right before he says he's not touching it. Lmao
Is this supposed to be a joke?
Mhmm
Yeah, like wtf
He touches it then he stops and shows that the controller is stuck and evidently drifting
How do you take it out
The fact these problems still exists on xbox 1, ps4, nintendo switch. And nintendo switch lite in 2020 is insane
Worked perfectly, thanks man saved me a few bucks
idk if your gonna respond to this but how do you take that little peice out
i just like how he is doing it for his dad
This is just a temporary solution, it goes back to drifting after a while
Hmm maybe stop hitting ur controller
@@graysonlezten1455 It sometimes happen at random
2:56 As you can see in the reflection he’s touching the controller lmao nice try bud
Yeah and i can hear it too
Then immediately after he takes his hand off and the thumbstick keeps registering despite his hand being off clearly shown in the reflection at 3:05
Yeah he does this to show stick drift...
i've had stick for so long this helped a ton thanks : )
Broooo It worked, I love you seriously❤️
Get to the point damn it
Amen brother preach
Great video. I attempted to do this and yes it fixes the drift issue. But if its happening to the right joystick near the XYAB buttons don't remove the gray tab as it causes your remote to spin.
Just my two cents
4:30
Omg memories
STOP! Before you take your controller completely apart or fill it with isopropyl alcohol - try this!
You'll have to at least take off the face plate for this method.
1. Open
2. Go to the problematic controll stick and lodge (something skinny preferably) into the green piece that is affected.
3. Push it back (only a little and not too hard)
4. Check if the controller is working!
It worked for me just now lmao
Wish I would’ve seenthis video before cuz I’ve already broken one of my controllers out of anger for this shit.. Thank you bro u a life saver
So we not gonna talk about how he watched a vid on it?? 5:00
LUL
Can you link the video you were watching please because I'd rather clear instructions.
🔥🔥🔥why did you do him like that?
Step 1: Q Tip
Step 2: Rubbing Alcohol
👌🏻
Zquol what do you mean, like put rubbing alcohol around the edges of the joystick
Lol
@The Odd Gamer lol
Been doing it and it just dosent seem to help
thx
you know this guy is good when he has fortnite monopoly
thank you so much! I hope you become big!
Thank You!
Oh I just banged my controller till it worked. It took like 2 seconds. And guess what? Nothing broke!
For real?
kleinux 13 yup
Me over here doing this with a Xbox 360 controller 😂
8:53 thank me later
ViperzzFn ViperzzFn you mean 8:07
No shit
Bruh why
Omg it actually worked. Tysm. My fam was running low on money so I couldn't get a new controller but this worked and now I'm so happy 😊
i slammed my controller to the ground and it exploded and i don’t have another controller besides 1 that has crazy stuck drift and i don’t got money so ima try to fix this one and if it don’t work then i’m fucked
4:28 bro my controller does dat and it is annoying af
Same
I literally Have to hit it to work
Same its so annoying its pissing me off
idk whattoputhere yup I am pissed it just started happening to me
Why am I doing this but thanks I’ll keep this just in case when my new controller gets driftstick
at the beginning he’s using the other controller to make it look like there’s controller drift🤦🏾♂️
What? Why would i do that?
TheOfficialG yeah why would you do that
@@masatodoxey771 the answer is i why would i want to take apart a functioning xbox controller which are expensive and remove a factory set piece on it if it has no issues it would just be pointless
He's not tho
He cant bro
I am genuinely shocked that this worked! Thanks u saved my controller
I’m genuinely surprised this worked lol this one little piece almost made me break my controller
I took the gray part off and it still drifts
me too
I have that drifting problem playing football nfl
So true
I'm playing Roblox foot ball universe and I can't catch and madden
It really work Great video thank you so
Thank you so much bro love it.
this video is helped to me thank you bro thank you
thank u mine works now it was making move to the left on the left stick i remove the grey part it doesnt do it thank u
How did you remove the grey part please ?
@@psytempo5642 it's easy
but how
@@hamppy47 I didn't do it.. There's another video u can watch... When u replace a small piece, and it helped me