***Lets Build a Wall!***
HTML-код
- Опубликовано: 4 фев 2019
- Follow along the #projectSPL video series as we build a dB Drag Super Street spl vehicle from scratch. In this video we get started on the enclosure. Lots of wood to cut, fit, and install to get this just right. I show some of the various methods I use during this leg of the install.
#sundownaudio
#projectspl
#sundownaudiounofficial 
Авто/Мото
Woohoo I swear I've never wanted to build a wall as much as I do now man. Real talk
That's what Trump said.
Friday night,South Texas back porch tuned in...
Thank you for doing this build log. It really shows the hard work and dedication it takes to do a full on build. I love sundown. I was hooked the first time i heard your subs years and years ago. Keep up the great work sundown is known for. Thanks again for this build video. Very educational and info filled content.
Very nice
Looking good....can't wait to see this finished.
Lot of damn work! Glad your bringing us along for the ride.
I am getting more and more stoked dude! Love the video, the attention to detail, and all of the explaining you are doing.
Man I'm loving it....staying tune in.
great work thanks for showing your hard work
I can't wait to see this thing rocking bro great video keep them coming
awesome job man....looking great
Keep up the work. Love watching these updates when its too cold to work on my car.
A great big beautiful wall!!
Brilliant work Sir!!!
comming along great fam keep it up.
I’ve watched this video before but love it even more now knowing how badass the finish came out of project SPL
Coming along very nice
Your a beast. I like how you've tried other methods and now u know which way is best and your only gonna get better and better the more you do.
good work there i like it, cool step by step videos on the build
You are blazing through this build!!
Now that’s one hell of a build update.
Damn dude I am absolutely fucking stoked to see this build progress awesome update
Loving it man
Keep up the good work
Looking good!!!!!!
This is absolutely amazing. Never seen anything like this before, for me, stereo builds were building a box and dropping it in the trunk. Single amp pushing two 12's at 143dB was loud. I can't even comprehend this new level of competition builds. Very much looking forward to seeing this in person.
The wall is coming out great love the layering factor with foam behind. Going to be strong. The build is super cool bro and truly learning better techniques as it progresses. ✌
I see broken windshield in the future can't wait to see this beast in action great progress, great video thank you
Finally yall start 😂looking good bro
Looking really good..and strong..I wouldn't be surprised if u meter at ”180”..keep up the good work and love the vids..very straight forward and educational
Very informative and very thorough video. I remember building the wall in my Kia. I see a lot of similarities with these builds. Piecing together and forming to the contours took the longest to do. Building the actual shell went by really quickly as well as the beauty panels. You really got a lot of work done in such a short amount of time. My new build incorporates a steel cage which is not fun, but it is almost done. Piecing the wood in is going to be fun. All kinds of crazy angles in this other vehicle. The shell shouldn't be too bad I hope. So far we are on track to be finished to go to the show in Florence SC. Tuned in for the next update. Thank you for sharing this awesome build Derrick!
This build is so badass! Even got a peep of you smiling in the thumbnail 😂. Must be a hell of a build if your smiling like that 🤣. Can't wait to see this in action, it's giving me soooo many ideas as to how to do my wall!
Great job bro
Appreciate the time lapse
Oh no! Not a wall!
Oh it's you. 😓. I thought it was a nightmare. 😉👍
It's looking good!
nice work bro
!EXCELLENT!
lookin sweeet!!. I want that blacked-out Van! #BassHeadNation
Hell yea bro... Your doing a awesome job on your project and on the time-lapse... KEEP ON KEEPING ON
More time lapse work coming. Working on a new video now.
Holy shiznit bro ur a BEAST 4real i think i would have a heart attack trying to do all that myself that's pure dedication right there i bet when ur all finished with that OMG that thing is going to be so Damn LOUD i can't wait to see it and hear it ok im sorry for rambling on (✌🏼💪🏼🔈💪🏼🔉💪🏼🔊)
👀 looks like it’s coming along nicely and without help 😳 😓 , I been there many times myself. Well anyway keep up the awesome craftsmanship, all that hard work will pay of the long run 👍🏼
🔊🔊🎵🔉🎶🔉🎵🔉🎶🔊🔊
Looks sick! I would run some bolts thru that over lap in the floor with metal plates on each side. Give a strong wide surface to keep the sheet metal locked to the box.
You’re a fuckin soldier, bro! 💪🏼
Shell: 1,386 lbs, + loading wall + rest of materials for the full enclosure + subs...I estimate between 1900-2100 lbs total...? * not adding in wire, caps rhino liner etc...
Awesome stuff!!! It's good to see a company doing THEIR OWN builds... A lot of these guys out there ha e other people come in and do all their work !!!!! 👍👍👍👍
A lot of “other people” don’t have jobs in car audio and work 80+ hours a week. Comments like yours are so damn ignorant.
Did you build the house or apartment you live in?
Did you put the engine together in the car or truck you drive?
Did you build the bed you sleep on?
How about the dresser?
Ohhh right, that’s different, huh? 🙄
See, I can be ignorant too.
What’s really funny is when people do the build themselves and it sucks, everyone talks shit about how they don’t know what they’re doing and how they should go “educate” themselves or just pay someone to do it. There’s literally no winning with this shit.
@@ThisGuyDrives you basically tried commenting on a comment you were TOO DUMB to read or understand. ILLITERACY is a HUGE problem , GET EDUCATED
that is awesome brother you are getting it done! that truck will be pounding in no time. how could anyone give thumbs down they must be brain danaged😎
Looookn goooood
I always use a sonna tube for concrete forms and fiberglass the outside. Easy way to make super strong tubes
You all are kicking ass! Looking good
You watch too that's amazing. Are you demoing at slamology this year?
Only if I get it done in time
@@legendsofcaraudiobradnewso8424 What is your next plan?
I'm still trying to wrap my head around chasing 172 db. It's obviously not as easy as just turning the volume up. The thickness of these walls are so mind blowing for me. I'm staying tuned! Looking great.
Yeah usually 170+ builds are with a sealed box in the back and the rest of the vehicle acts as kind of a 4th order box. Interesting he's doing a standard setup in a non van going for these numbers
Fuckin killin it bro!!! Thanks for the info and how your putting this thing together.
537 FTW!!!
GOING TO BE L. O. U. D. !!!!!!!!!
Startin to look like a 170😮
This was a great vid, and i like that you discribe every step like that. 👌 But, more timelaps would be awesome 😎 GL with the build sir
I'll include some more time lapse next time
Use a glue spreader. With 1/16 x 1/16 notches. Spreads amazingly.
Lock tite spray foam works damn well
Perfect to follow this entire build .
I have 2 sundown nightshade v3 18 inch , can you tell me how much liters I need for these .
I had a 4 th order but my car was to small , so now I gone do a wall .
Thanks already for the answer .
Awsome shit bro.. just a suggestion it might help to run bolts thru the frame and plywood with lock washers. Might be late for that but def gonna be slamming.
Giving out all the secrets
There will always be a few lil secrets I keep for myself
Hmmm.... I'm loving the video. Very very detailed in the description... makes me think you need to cut back on the caffeine. I only say that, bruh... because it sounds like you're tweaking. lol
But anyway, its good to see that you considered everything and left nothing out.
Looking great #solobuilder
Are you still competing? Do you have some new ideas for higher spls? Small tweaks or big system overhaul? 170 db is crazy loud! Good job bro!
Could you do a time laps of the 2 part foaming.im looking to use that product in mine.
I would wall my car. But I find myself sleeping in it often due to bad relationships😉. If I had a design that the driver side seat had full swing back it would be sweet.
Hey bud you should try out the other construction adhesives in a test liquid nails did the worst out of all the ones I saw. I think the loctite pro line 8x did the best and it was like 6 times stronger.
Bet this build will be a fucking banger
Damn, make me miss my 4 door blazer
Question on doing a 6th order (might be a dumb questionoh well but here goes it anyway lol. Lets say you have this to work with D37"xW52"xH36" then you put a box on each side for D37"xW15"xH36" and port it at 26hz then it leaves D37"xW22"xH36" in the middle of both boxes do i use the D37"xW22"xH36" measurements to figure out the last port i want or the total dimensions? D37"xW52"xH36" that both boxes is in?
I'm doing my hummer h3 soon
Question: so would it be allowed at the show to build a port into the vehicle? Use something similar to roof vents for houses. Like the stove fan is vented on the roof. Thank you if you reply.
How long did you let the glue dry or can you do multiple layers at once? Like glue layer, glue, layer, glue, layer then let it all dry
Did the idea of kerfing occur during this process when it came to fitting it to the sides?
what would u recomend for my build. i got a ford explorer and im wanting to do at least 2k rms. my question is whats best between 1 18 and 2 15s what would be best?
How do you bolt your wood to kar frame.?
You need some 2" spacers behind those rear rims ! It would look ALOT. Better!! It looks too narrow in the back end.
Is it just me or do those angles just have one layer where they start upwards from tha side wall
Just take the top of the seal out of the window and pour some foam in and ratchet strap it back,
EXCELLENT BUILD LOG SO FAR EXCELLENT EXPLANATIONS PEOPLE DON'T UNDERSTAND YOU RUSH YOU GOT A FIX YOU DO IT RIGHT THE FIRST TIME EVERYTHING'S ALRIGHT!! YOU DO SOME GREAT WORK AND I'M SURE IT'LL BE BANGING HOW MANY CANS OF FOAM DO YOU THINK YOU USE SO FAR? THANK YOU IN ADVANCE....SIMPLE
I've used about 20 cans of great stuff spray foam so far
Why don’t you just open then sunroof, por 8 tonnes of wood chipping inside, followed by 98 litres of resin wood glue, then you’ll have your dream come true- 100% solid filled with wood in the back right to the roof, vehicle weighs 12 tonnes and only the drivers seat free. Hope this tip helps you out 👍
Whats a good estimate$$ on having some one build me a wall in my sedan?
You putting some weatherproofing on the outer portions of your wood close to the wheels just in case its raining when you're going through the lanes?
It'll get coated with bedliner
How many gallons of 2 part foam have you used already in the build?
About 12gal so far with another 10gal on the way
36:08 thats what my wife says
Haha lol
36:10 is what he says back to her
Dude this is coming along so well . Two things where can I get one of those sundown shirts and can you show some footage of the foam application with that 16lb foam I’m interested to see how well it flows and expands . Are you worried about the foam breaking those back windows at all ?
I've already used quite a bit to fill voids and it will always follow the path of least resistance. As long as there's an opening for it to expand into it will do that. This stuff also has a low expansion rate and I'm pouring it lil by lil in small batches.
Im loving the build so far but maybe its just me but i still dont get them point of the rims.
To look big, wild, crazy, stupid, etc. Besides being loud the point of this build will be to attract attention as a booth vehicle. The rims and future wrap will attract that attention very well. Its already working great from all the feedback I've seen.
@@UnofficialAudio Ok well now i understand makes sense lol. the rims are nice ill deff give you that, im more for the system your building tho thats just me tho. good thing you didnt do spinners those things are so stupid.
Does that cheap "great stuff" foam have any sound deadening value?
Yes anything that will stop panels from flexing and resonating will help deaden sound
Awesome.
You planning on bringing this beast up to Slamology this year?
Yes it will be there at Slamology in the Sundown Audio booth
@@UnofficialAudio Sweet! I can't wait to get another demo in the van. That thing is just badassery at it's finest.
Be cool to time lapse as u work and build so we can watch it happen
First here
Why Don't you use metal welded box if you need strength?
Trying to stay light weight and ease of assembly
Build that wall! MAGA
I haven’t seen anyone ask so.. I guess I will.. what are you going to do about the fender wells.. just leave it with wood exposed??
Previous video he said bedliner.
All the exposed wood on the sides and underneath as well as the inner fenders and rear frame will get coated with bedliner
Oh I guess I missed that one :(
Cuanto quisiera poder hablar 🗣 contigo tengo un secreto para que ese db su más pero es imposible comunicarse o hablar con ustede
1386
Derrick is this going to be similar to this setup? ruclips.net/video/xb5G4IXKwcM/видео.html
And don't pour into much
Should have just filmed yoourself working and not talked and talked and talked... definitely do some talking and explaining but man 40 minutes of just talking about it when you could have just shown it by setting the camera up and hitting record while you worked. Looks good man thatz a fak!
Gonna try to do less talking and more time lapse
@@UnofficialAudio wasnt being ugly. I just wanted to see the process and maybe some explaining as each night ended. That would be much more palatable. Especially for a 40 minute video. I do appreciate the detailed explanation but i feel more build action would be more enjoyable to watch. Just my opinion bud your videos your call. Period.
I gotcha no offense taken. Didn't realize til after the fact that this vid was so long and I totally did a lot of talking. Gonna try to keep the vids shorter with more updates.
@@UnofficialAudio vid was great everyone has different tastes but I like the in-depth explanation. Please keep the videos as long as possible for educational purposes.
What happpends when u come up sub par? Look to the drawing board again. The smart man would of put together a demo ride that looks good and got a Years worth of vid . By the looks of your shop u can’t do Clean work . That shows a lot in a person .
Well in true competitor fashion I'm just gonna say bring it. Come to the competition lanes and lets see how it works out for ya.
Darrin Hill where’s your amazing build?
Lost me at the junk liquid nails
Your gluing boards together with no plan . Lol this is a big joke people . When I want to see a real show I watch car audio Fabrication. Clean and professional . This shit is a joke. Lol . Hey I had my mini truck in the Consumer electronics show next to Kenwood I did all the work.
You're confused. There's a plan but not on paper. Its all in my head and no specific dimensions. This is spl. Its custom and certianly not a "one size fits all".