What's better - ball valve vs gate valve vs stop valve

What is the difference between a tap and a gate valve and a ball valve. Which is better to use in a particular case. Fundamental differences, pros and cons. When arranging a water supply system in a room, sometimes the question arises - which tap is better? What is more correct to use in one place or another - Ball, valve or gate valve? Each is suitable for a specific purpose. First we set a goal, and determine their task, then we select the stop valves.
#ball_valve #gate_valve #seat_valve #plumbing #engineering
Music:
Artist - Jeremy Blake
Composition - A Rising Wave

[@fasteddie4107]

This was a very thorough review. Thank you for putting this out.

[@benjaminintrigue911]

I have ball valves everywhere, the gate valves are not reliable

[@beboboymann3823]

This was a very good demonstration of the valve differences. my shut off valve to my house won’t stop the flow completely so that I can do plumbing repairs and changes. I am sure the rubber seat washer is worn out. So using your information I want to replace it with a ball valve. What are your thoughts on homeowner use of brass compression fittings instead of solder connections. It will be much easier for me to replace the whole house shut off valve outside the house without having to solder the connections.

[@Clever-Bill]

Brass compression fittings have one feature, they cannot be used in inaccessible places, as over time, their connections can loosen. Therefore, of course, soldering is preferable, but if access is available for inspecting the connections, compression fittings also have a right to life.

[@fixman.persian]

great post i like it

[@jeanxia9885]

Hello I have a question about a 25mm Outlet with WaterMarked Brass Ball Valve at our home
. The tank outlet is located near the bottom of the watertank where collected rainwater flows out. The threads are BSP type, and the default outlet is 25mm. Want to attached a water facet to the outlet valve for watering the garden (does not have any other water outlets for direct use) it that possible? If u could let me know, I would be so thankful

[@Clever-Bill]

Hello. If I understand you correctly, you want to connect a garden hose to a 25mm ball valve. If so, then it is very easy to do. You need to buy an adapter with an inner diameter of 25mm and an external fitting for connecting a garden hose. If I misunderstood you, you can send a photo of your crane to my mail
[e-mail], I will try to answer you immediately.

[@Karnakar_Marri]

@@Clever-Bill My shower pipeline is outside of the wall so i thinking to use a valve in low budget, can I use a ball valve or not

[@Clever-Bill]

To adjust the water intake, a ball valve will not work, it has only two positions open and closed. In order to regulate, a seat valve is needed.

[@ashimadekunle6137]

@@Clever-Bill hello

[@ashimadekunle6137]

Good day, I was trying to bring water from the reservoir tank to my toilet but the pressure of the water could not reach the upper part. What do I need to add? Which of the valves will assist in pressure increase? Thank you

[@Clever-Bill]

Hello. The valve does not affect the increase in pressure in any way, it is a shut-off and control valve for water. If you need to increase the pressure of the water, you need to look at the booster pumps.

[@AlexKazuma]

3:20 - "Hi everybody!"

[@Clever-Bill]

Types of water valves. What is the difference between gate valves, valves and ball valves where you can use these devices, in one case or another, which is better to use for home water supply. Fundamental differences, pros and cons ....

[@hasanraza192]

Which is best

[@tonymanero5544]

Watch the video. Ball is most popular for home use but for on and off, no adjusting flow.

[@mickwarnie8707]

Is this in english?

[@AliHassan-lk4sh]

No Persian.

[@rapidrabbit7175]

What?

[@Clever-Bill]

So you didn't understand anything? Each device in its own way is well suited only for a specific purpose!