Fiat Bravo II. T-Jet /w Garrett GT1446 - Dyno (200+)

Поделиться
HTML-код
  • Опубликовано: 22 окт 2024

Комментарии • 74

  • @ads.alissonlara
    @ads.alissonlara Год назад +4

    First of all congratulations on Bravo, it's magnificent, and very brave indeed hehe
    Hello, I'm from Brazil, here we like to tune this 1.4 Tjet model in both punto and bravo or linea tjet.
    The most standard recipes for Stage 3 here are:
    Bosh Nozzles 65lbs
    downpipe
    Intake
    Turbo BorgWarner K14 or K16, k14 has full pressure at 3,300 rpm
    Stronger fuel pump
    Changing fuel to Ethanol (E100) It has a better rate than gasoline and it is safer for us to use it, in addition to having a higher whp gain than gasoline.
    We have several Tjet with
    260whp, 280whp, 296whp, and an incredible point forged with 390whp.

  • @mich7931
    @mich7931 Месяц назад +1

    Hey, is this M32 6 speed gearbox. How is it working with such a momentem (Nm) and did You do aby mods with it?

    •  Месяц назад

      hey, well, like 4 years ago my M32 got the usual bearing issue, it got rebuilt and it runs well since then. oil is 2.6L inside it right now, by the way car is running on td04HL atm, gearbox handles this well except the diff, i need LSD :D

  • @ingauno71
    @ingauno71 2 года назад +2

    hello Krisztian is the extractor of the Giulietta ?? Were you able to mount it without difficulty? Thanks

    •  2 года назад +1

      yes it's a Giu. it is difficult and expensive as heck. literally cut in half a bravo and a giu qv bumper then welded together then painted

    • @ingauno71
      @ingauno71 2 года назад

      @ thanks

  • @alexialexiev3528
    @alexialexiev3528 2 года назад +2

    Have you had any problems with the transmission and clutch? Does it hold up well with the extra power?

    •  2 года назад +2

      clutch needs to be replaced, can't hold, m32 seems fine. but i have already replaced the bearings in it

  • @nimbus6503
    @nimbus6503 5 месяцев назад +1

    May i ask you if i can know the diffusor and bumper front? like exact spec?

    •  5 месяцев назад +1

      we cut a bravo and a giulietta bumper in half and welded together

  • @panoskoniaris9918
    @panoskoniaris9918 7 месяцев назад +1

    Any advice on Fiat Bravo 1.6 Diesel Mjet 120hp ?
    I hardly see people tuning it. I might ask silly questions since I am a beginner but you seem like a person who would have an explanation on my question.
    Thank you in advance

    •  6 месяцев назад

      i also own a 1.6 mjet, and i gave up the tuning. it doesn't have the displacement to tune if efficiently. if You place a hybrid/bigger turbo on it You will lose the low end torque.

  • @belesiu8526
    @belesiu8526 Год назад +1

    Hi, where did u get that black Fiat Emblem, that difusser looks So good

    •  Год назад +1

      hi, thank you.
      both are custom made. The emblem: i've heated it so it has separated, then sanded then painted to black. The bumper: a giulietta qv and a bravo2 bumper welded together then painted black. :D

    • @belesiu8526
      @belesiu8526 Год назад +1

      @ I see, thank you so much, I have a 1.9 mtj Fiat bravo 2 and I want to modify a lil bit on details ;d

  • @jonathanturnbull2617
    @jonathanturnbull2617 2 года назад +1

    Why did you go with the tjet? Was it not better to go with the 165 2.0 sport diesel? Has 15bhp more and one remap without any type of mod can get 200 to 210

    •  2 года назад +12

      answer is simple. i think diesel stinks, and has awful noise. i'm a petrolhead😅

    • @MrAndreCoutinho
      @MrAndreCoutinho 5 месяцев назад +1

      @and also, the 1.4t can be modded quite easily to reach 250bhp or more.

    •  5 месяцев назад +2

      ​@@MrAndreCoutinho yeah i know that, in the last year i blew up an engine (by a mistake) and installed a td04-19T, running on 300ish hp right now, also using it on trackdays

  • @bellicromanx
    @bellicromanx 2 года назад +1

    213 HP, nice. 120 HP Camshafts?
    Also, how is the feel at high revs till the limiter? Does it feel strained after 5200 RPM as the power drops?

    •  2 года назад +4

      it has stock camshafts yet. but i already bought the 150hp (bravo) and ready to be replaced. just needs a few tool. after that, i will rev it happily over 5k. now it feels like I'm going to a wall so..😅 not that great.

    • @bellicromanx
      @bellicromanx 2 года назад +1

      @ Thank you. Waiting to hear your feedback once you install the 150hp cams (which I think are the same as Abarth cams) :)

    •  2 года назад +1

      @@bellicromanx yeah probably they are closer to the 150 one👌

    •  Год назад +2

      @@bellicromanx finished installing 150cam, power was like 210 but car feels much much different. revs happily to 6500. beautiful. but now i got TD04 so.. will check with that too

    • @bellicromanx
      @bellicromanx Год назад +1

      @
      Thanks for getting back. Was wondering if you ended up doing it or not just recently ;) Great to hear that it revs much better. Enjoy your car with TD04!
      BTW, if you did the cam swap yourself, do you have any guide that you recommend for that job?

  • @robertobarragandiaz914
    @robertobarragandiaz914 5 месяцев назад +1

    De que coche es ese difusor de el paragolpes trasero

  • @kakilai-diybypatricklai1711
    @kakilai-diybypatricklai1711 2 года назад +1

    Is the GT1446 hybrid-ed or is a standard GT1446?

    •  2 года назад

      standard 1446. i wish i could get a proper hybrid 1446...😁

  • @kakilai-diybypatricklai1711
    @kakilai-diybypatricklai1711 2 года назад +1

    What diffuser did you put on your Bravo??

    •  2 года назад +2

      this is a compete giulietta qv rear bumper welded to the bravo. literally cut both in half.🤣

  • @enricodambrosio239
    @enricodambrosio239 2 года назад +1

    Could you help please am looking for part numbers for map and intake sensors, make great project cars these tjet engines thanks.

    •  2 года назад +1

      U should get one from 595 essesse

  • @alfaromeo156j
    @alfaromeo156j 2 года назад +1

    Helló.Programot ki írta? Tudtommal Manky csak dízelre ír. Abarth T-jetre keresek valakit,hasonló konfigra mint neked :D

    •  2 года назад

      egy holland srac keszitette, erti a dogat, ahogy a videoban is lattad. Mankyekat csak megkertem hogy legyszi merjek le ;) mindenben tudok segiteni ;)

  • @mrgame9530
    @mrgame9530 Год назад

    che preparazione hai apportato oltre alla turbina grazie

    •  6 месяцев назад

      intercooler, injectors. thats all.

  • @srkiv
    @srkiv 2 года назад

    Hello,I have mito tjet,I have garret 1446. Injectors are from which Giulieta?

    •  2 года назад

      hi! all you have to check is: it has to be 170hp

    • @srkiv
      @srkiv 2 года назад

      @ did you get 200hp only with another turbo? Or with turbo and injectors?

    •  2 года назад

      @@srkiv turbo, exhaust manifold, injectors and intercooler

    • @srkiv
      @srkiv 2 года назад

      @ which one is manifold?

    •  2 года назад

      @@srkiv i have one from a stock abarth 1.4, not custom made.

  • @filipevalcanaia1641
    @filipevalcanaia1641 Год назад

    what wheel model?

    •  Год назад +1

      this is a tomason tn1, 4x100, 8,5j. sorry for the late answer

  • @Andreaclio87
    @Andreaclio87 2 года назад

    Estrattote della giulietta e'?

    •  2 года назад

      that's right

  • @giorgossideras7733
    @giorgossideras7733 2 года назад

    👍👍👍👍👍👍👍👍👍🙉🙉

    •  2 года назад

      grazie :D