How to Remove The Capacitor on the Circuit Board Using Desoldering Wick?

Soldering and desoldering tutorial.desoldering tips using desoldering wick.Desoldering wick how to use.basic soldering and desoldering
In this informative video, we will guide you through the process of removing the capacitor on a circuit board using desoldering wick. We will explain the importance of removing a capacitor, the tools needed for the job, and provide step-by-step instructions on how to safely and effectively remove it. Whether you are a beginner or experienced with electronics, this tutorial will help you master the skill of removing capacitors with ease.
My other repair videos.
bit.ly/3k8NzRH
My DIY videos.
bit.ly/3j4aOgr
You can contact me via e-mail [e-mail]
Do not forget to "like" the video if you like it. You can subscribe by clicking to not to miss new videos / @electronic7979
#shorts
#shortsvideo
#repair
#fix
#circuitboardrepair
#electronicscreators
#elektronikkarttamiri
#elektroniktamir
#electronicrepair
#electroniccomponents
#electronicsrepair
#smd
#soldering
#solderingtutorial
#solderingtips

[@abeditani8293]

YOU DONT NEED WICK to remove a 2 pin component

[@electronic7979]

This is a different method

[@ccflan]

​@@electronic7979different method does not mean a better method, your method is not professional

[@LockDots84]

What is not professional about if it results in clean extraction?

[@yoshikey739]

​@@LockDots84 Wasting materials for no reason ☠️

[@akhyarkharisma7045]

No need wick, no need expensive solder, no need paste, only heating an pull left & right, I think this is new expensive method😂

[@KhengToeur6898]

I like your video❤

[@electronic7979]

Thank you so much

[@anime_lover_station]

I just use copper wire for d soldering 😅 my father not giving money for that

[@electronic7979]

😀

[@DeltaLima274]

Well, I would say using first a desolder pump and after that the desolder wick for the rest of it. In your shown method, its a waste of desolder wick

[@electronic7979]

Thank you for your interest. The method you mentioned is also the correct method.

[@Антон-к8х5ц]

Я не знаю как цензурно выразить мою реакцию, да ещё так чтоб было не слишком длинно и корректно переводилось...

[@electronic7979]

I'm sorry for making you so angry.

[@logictv6667]

music name

[@electronic7979]

Eine Kleine Nachtmusik (by Mozart) - Mozart

[@SuaChuaDoDienDungNgan]

Time????

[@electronic7979]

I don't understand

[@SuaChuaDoDienDungNgan]

@@electronic7979 It took too long.

[@freenetvirus]

Tutto sto casino per staccare un condensatore 😂😂😂

[@electronic7979]

yes. 😀

[@emaveganlatino167]

😂😂 già

[@halitoter1350]

çok gerenksiz..

[@electronic7979]

Teşekkür ederim

[@milanzizka4636]

W. A. Mozart

[@bbyeler]

gördüğüm saçma sökme şekli. tek katmanlı bir kartta tek yapman gereken parçayı ısıtıp diger elinle almak.
o elindeki fitil çok pahalı be kullanım yeri bu değil. ayrıca son kısımdaki koca kondansatörü cımbız ile tutman ne kadar özenti olduğunun tam kanıtı oldu.

[@electronic7979]

Teşekkürler

[@АндрейАндрей-ц9й7д]

Для этих целей используют 223,а от 559 рак лёгких ты себе обеспечил, он используется на предприятиях с хорошей вытяжкой и без участия людей)))

[@electronic7979]

Yes, breathing the fumes is harmful for health. I'm thinking of making a smoke extractor soon.

[@SwingMotor]

Wasting desoldering wick 😂😂

[@electronic7979]

Yes, I wasted a bit.

[@memetsolder]

that's why there's a fancy music 😂

[@bgdgdgdf4488]

Its like 5 bucks for a whole spool of this thing. Relax.

[@domozs4370]

Sipmply use transformer soldering iron (right hand), and pull capacitor out (left hand).

[@electronic7979]

thank you

[@michaelhawthorne8696]

Be careful, you might end up ripping out the hole through plating.
Single layer Double/Single sided PCB should be ok but a computer Mobo needs more care than what you suggested.

[@ulinkot]

Грей контакты и поочередно их приподнимай.

[@electronic7979]

yes

[@sergun93]

ну, быстрее и дешевле выйдет

[@ulinkot]

​@@sergun93дешевле это скорее купить новую плату(китай китаем..) чем платить за ее ремонт😅

[@sergun93]

@@ulinkot а причем здесь платить за ремонт? Тут речь о самом ремонте. Это для той аудитории, которая умеет паяльник держать в руках. Являюсь радиолюбителем, сам немало техники подчинил)

[@ulinkot]

@@sergun93 правильно, ремонт должен быть бесплатным. вот вы сами как радиолюбитель все понимаете:) а я вас как радиолюбитель не понимаю:))

[@fatihkirimli474]

Kardeşim lehim pompası diye birşey var niye bununla uğraşıyorsun 😂

[@electronic7979]

evet biliyorum. bu da değişik bir yöntem

[@dabocket445]

pro tip: if it is 2 leads you can just remove it after desoldering the first lead

[@electronic7979]

Yes you are right

[@pauk-0962]

Поигрался😂 а теперь как надо, берем конденсатор одной рукой, второй рукой держим паяльник и греем пятаки с оловом, аккуратно покачивая конденсатор, и вуаля!

[@electronic7979]

Thank you for your comment.

[@pauk-0962]

@@electronic7979 спасибо за ваше видео!

[@emmettturner9452]

You didn’t even need to preheat the legs before introducing the wick! Now try it on a double-sided PCB with a ground pour and plated thru-holes. ;)

[@electronic7979]

Thanks! You're absolutely right, double-sided PCBs and plated holes with grounding do increase the difficulty level of the job. I'm trying to get through that with temperature control and proper techniques. If you have any advice, I'd love to hear it!

[@priyatamsinghchawhan]

एक कैपेसिटर को वो भी सिंगल लेयर सर्किट बोर्ड से निकालने के लिए, इतना सोल्डर वीक बर्बाद करने की कोई ज़रूरत ही नही थी। बस हीट करके कैपेसिटर को पीछे से बाहर निकाल सकते हो।😂😂😂 मैं भी इलेक्ट्रॉनिक काम करता हु, भाई...🙏

[@electronic7979]

thank you for your interest

[@crazyhamselectronics6318]

Why these much exercise? Heat both lead of capacitor and pull it 😂

[@electronic7979]

thank you

[@kevinnsevinn799]

I just accidentally blew it up…gone…just a lot of lil bits of paper all over 😬

[@electronic7979]

:-)

[@justOVERCH]

useless
I can do it without wick
And without solderingiron

[@electronic7979]

Yes you are right

[@javierespanapereira1615]

Muy poco eficiente. Mejor sacar el componente y luego retirar el estaño con la malla

[@electronic7979]

May be

[@carloshpaiva]

What happened to the good old sucker? Has everyone forgotten?

[@electronic7979]

:-)

[@Svetcvi]

глупости, тратить оплётку для выпайки конденсатора

[@electronic7979]

:-)

[@giorgiobirilli1986]

why not using a desoldering station, with no high damage risk?

[@electronic7979]

I made such a video to show a different method.

[@HackingInfo]

Music?

[@user-sssr78]

Видео плохое и не профессионал паяет это так видео бестолковой этот элемент можно в в пару секунд отпаять а не мучать плату нагревом и таким расходом всего. Не повторяете это

[@electronic7979]

😀

[@ivankovac69]

Tomu kondiku ocividne nic nie je, tak preco ho vyberate...😢

[@electronic7979]

:-)

[@ismailirey6430]

Bu kadar malzeme kullanmaya gerek yok.

[@electronic7979]

Değişik bir yöntem olsun istedim.

[@god_bika]

if oveheat the path it would swollen off board

[@electronic7979]

yes

[@ПлатонЦарёв-к9э]

Оловоотсос поможет сделать это не затратив ни грамма медной оплётки. И быстрее

[@electronic7979]

Yes, you are right. I just wanted to show a different method.

[@taniamarcia2716]

UM SUGADOR RESOLVERIA E POUPAVA TEMPO.

[@electronic7979]

Thank you for your comment.

[@oficinaemcasa5921]

Ficou mais caro o molho que o peixe.😂

[@electronic7979]

:-)

[@mikecauser]

TL;DR use more flux

[@electronic7979]

😀

[@alexanderzhigulsky1140]

С металлизированными отверстиями это не пройдет

[@electronic7979]

Thank you for your comment.

[@ВасяПупкин-ц2ф1л]

Без оплётки с припоем конденсатор выпаивается за три секунды с перекуром на кофе!

[@electronic7979]

Yes, maybe.

[@Putuyiki]

Hey i have solder sucker

[@electronic7979]

nice

[@fengseattle8829]

浪费了

[@electronic7979]

Thank you for your comment.

[@resonatic]

huh 666?

[@electronic7979]

I don't understand.

[@conann31]

😮

[@electronic7979]

:-)

[@mohdahadalikhan5171]

I just heat it and get the capacitor out. It is that too easy😂 , the title should be how to waste desoldering wick😅

[@electronic7979]

I just wanted to show a different method.

[@mohammadrazalp.p2361]

Worst methode 😅

[@electronic7979]

😀

[@AlmerJoseph]

JUST USE A DESOLDERING GUNNNN

[@electronic7979]

Yes. This is a different method.

[@ramazanakkose1764]

​@@electronic7979LOL

[@layoung9778]

Guy.. imagine when he remove sdm capacitor from the circuit😂

[@electronic7979]

:-)

[@tasicss]

Did u even hear for vacuum suction pump for desoldering?

[@electronic7979]

Yes. I heard..

[@elcuajinays8817]

Un trabajo profesional ,como debería de hacerse y las placas lo agradecen,lastimosamente no siempre lo hacemos así por temas de ahorro y tiempo.

[@electronic7979]

Thank you for your interest.

[@brantipoohs6716]

What size is the tip you are using on the soldering iron?

[@electronic7979]

1.5mm

[@barbomonaretta8261]

Good music

[@electronic7979]

Yes. thank you

[@electronic7979]

yes

[@michaelhawthorne8696]

Sounds like Mozart

[@cinnabar7]

見てるともどかしくてハンダシュッ太郎でスポンってやりたくなる

[@electronic7979]

😀

[@johnparker9482]

Good Job, that a 123 JOB 😊

[@electronic7979]

thank you

[@BrbCb-hj9qp]

I try to work on cb radio interesting

[@electronic7979]

:-)

[@marty3553]

Great job I liked it

[@electronic7979]

Thank you for your interest.

[@girl29ma]

Ombe caliento y lo saco.. listo 😅

[@electronic7979]

😀

[@JoelMorales-d4s]

Cómo te marco la falla en el condensador

[@electronic7979]

You can test the capacitor with a capacitance meter.

[@neffiu8433]

Nice

[@electronic7979]

thank you

[@jackyluong9618]

good tips.

[@electronic7979]

thank you for your interest

[@damocles5047]

Ey gidi ey xytronic. 2008 gibi weller ersa falan bunlara alternatif istasyon havya bakıyordum gittim Karaköyden bunu bulup aldım.

[@electronic7979]

Valla hocam ben çok memnunum. 17 yıldır kullanıyorum banamısın demedi. Tabiki ersa,weller,pace gibi ürünlerin kalitesine bir sözüm yok ama xytronic de kalite bakımından güzel bir ürün diyebilirim. havya ucu gibi yedek parçaları da diğer havya türlerine göre oldukça hesaplı

[@damocles5047]

@@electronic7979Aynen, bizim şirkette Ersa'nın kocaman istasyon havyası vardı pompalı falan ama bu da uzakdoğu olmasına rağmen ferrari gibi bir şeydi. Yedek parçası da çok daha ucuzdu, o dönemlerde lehim tellerindeki kurşun içerik yasaklanmıştı mesela, şimdi teldir cımbızdır yan keskidir, yarı iletkendir her şey ateş pahası.

[@electronic7979]

@@damocles5047 haklısınız her şey ateş pahası nasıl düzelir bu durumlar bende bilmiyorum. Allah yardımcımız olsun.

[@hayrettindemir1199]

Ben de 2010'dan beri 988D kullanıyorum. Desoldering (1,2mm) iki de bir tıkanıyor, buna çözüm bulamadım.

[@electronic7979]

@@hayrettindemir1199 merhaba. cam tüp içerisindeki pamuk fitreyi değiştirdiniz mi? pamuk fitre tıkalı olunca emiş gücü azalabiliyor.

[@джонджонсон-й2х]

ты всегда так радиодетали мучаешь

[@electronic7979]

I don't think I tortured you.

[@джонджонсон-й2х]

@@electronic7979 то что я увидел , это как ножом по сердцу. стало жалко конденсатор . с новым годом . у нас 00 00 часов .