Yeah this is a known issue and that's the correct fix. For anyone watching that bought the RAVEN optic, the screws that PSA sends are for the Holosun and are way too short for the RAVEN. You'll need two M4 12mm screws and have to grind/cut the right screw down to about 11.5mm or so. Dry fit and tighten down without Loctite and make sure the extractor rod inserts, removes and moves freely in the channel. If not, grind off a little more until it does. Once satisfactory, apply the Loctite as usual and torque to spec. PSA sent me the wrong screws multiple times (including the warranty department), so apparently they don't even know which screws their own optic takes.
That’s why I really like the shadow systems design. They really thought about that being an issue. It happens more often than not that I’ve noticed if the screw is too long, it can cause that problem.
I had the same problem with a Glock MOS slide. I ground the screw down by a few millimeters with a Dremel tool. That issue, and my general dislike of the MOS system, pushed me toward Shadow Systems.
Wow I wish I could show you a picture of this micro dagger I got this morning dude. It has a bag of screws that says, “Shorter screw goes in right mounting hole” soon as I saw that it made me think of you here
Mine is currently on the shelf I tried to add the shield arms extension to the psa mags and now I can’t get them out but I did install an aftermarket mag release I just haven’t had the time to invest in getting it out
I’m not sure what’s going on brother but you’re the second person that I leave a comment on and somehow the comment disappears. I think you are onto something I think possibly like you said the screw hitting it ! I personally have had issues with the dagger series.. with that said I’ve heard that the micro daggers have issues .. but not as bad as the dagger …
Tell me about it, Brother! I actually tried to leave a comment on @GBGuns Table Top Review around 20x times and YT kept removing it. I would leave a comment, refresh the page, and it disappeared. I got so frustrated retyping my comment that I just copied it to my clipboard so I can just paste it once YT removed it. I finally gave up. Regardless, I appreciate you, Brother! 🙏🙏🙏
@@Styxx2018 of course my brother anytime ! Got to love it , lost subscribers, comments, likes , views lol jacking with the 2 A community! We don’t do it for money we do it because we love our community!
come tf on man, I was praying that this thing was as reliable as a taurus, but you kind of solidified its not, my buddy got a MICRO and COMPACT and his micro continues to have Lght primer strikes and FTE
@@thePreparedFather I appreciate 🙏 you watching 👀 and leaving a comment. Not sure if your buddy has the optic version, but I luckily haven't had any issues since grinding that one screw down. Thank you, again!!!
@beatvilliansboochi8606 Tyrant CNC has a great trigger shoe for the 43x that is phenomenal. Optic Planet has them for less than 70. Use HUMM code for 7% off. Swap out the weird hinged trigger shoe by PSA.
![[Bad] - YouTube ВСЁ? (победа VK и прощание с подписчиками)](http://i.ytimg.com/vi/pQ1bCOW5270/mqdefault.jpg)
Great Review by @GBGUNS ruclips.net/video/g_WZky6ddnE/видео.htmlfeature=shared
Yeah this is a known issue and that's the correct fix. For anyone watching that bought the RAVEN optic, the screws that PSA sends are for the Holosun and are way too short for the RAVEN. You'll need two M4 12mm screws and have to grind/cut the right screw down to about 11.5mm or so. Dry fit and tighten down without Loctite and make sure the extractor rod inserts, removes and moves freely in the channel. If not, grind off a little more until it does. Once satisfactory, apply the Loctite as usual and torque to spec. PSA sent me the wrong screws multiple times (including the warranty department), so apparently they don't even know which screws their own optic takes.
@@thatsrich944 Thanks Rich! You're da Man!!!
Thank you!!!
For sure!!! Thanks, Rich!!!
great video! very informative especially for me someone new to firearms. I would have been lost
🙏🙏🙏 Appreciate you!!
That’s why I really like the shadow systems design. They really thought about that being an issue. It happens more often than not that I’ve noticed if the screw is too long, it can cause that problem.
I don't known a Shadow Systems yet, but they definitely have me intrigued! Appreciate the support!!!
@@Styxx2018 of course my brother anytime !
@@Styxx2018 Get the Shadow Systems!!! Love them, as you probably can tell from the videos I've posted.
@@Delta-Alpha-Kilo That MR920P looks pretty sweet!
I had the same problem with a Glock MOS slide. I ground the screw down by a few millimeters with a Dremel tool. That issue, and my general dislike of the MOS system, pushed me toward Shadow Systems.
@@Delta-Alpha-Kilo I have been resistant towards the Shadow Systems pistols, but watching you compete with yours has me intrigued.
Wish you didn’t leave Instagram! And I’ll check out this review after work! Have a great day my friend!
@@Timburgess03.. Me, too, Brotha! My wife got a little upset that I open an IG acct. It wasn't worth making her upset. Appreciate it 🙏!!
Nice to know 🦾🦾🫡
@@TacticalAnimal Thank you! 🤙🤙🤙
Love the song choice bro
That is why I am shadow-banned!!! 🤘🤘🤘
Wow I wish I could show you a picture of this micro dagger I got this morning dude. It has a bag of screws that says, “Shorter screw goes in right mounting hole” soon as I saw that it made me think of you here
@@BrickByBrickVets What?!!!! They didn't have that before?! Nice! 🫡🫡🫡
@@BrickByBrickVets I have to admit.... This is one of reasons why I ❤️ PSA. They listen to the People!!! Totally glad I reposted the video.
@@Styxx2018 yea man I swear. This exact ported comp C1 came with that exact screw bag and statement! Made me think of this video immediately
Oooooo styxxx using his voice!
@@Officialammoalchemist Appreciate you 🙏!🤙🤙🤙
That would get me so annoyed. Poor QC and optics testing. A shorter screw might be the way or check with PSA if they do a replacement.
After my fix, it runs like a champ! Appreciate you!
@@Styxx2018 bro I was watching your video at work and must’ve got distracted during that part 🤣 gotta love a good dremel tool! Good work brother! 👏🏽
@@MightyGunzTV Thank you!!! 🙏🙏🙏
Mine is currently on the shelf I tried to add the shield arms extension to the psa mags and now I can’t get them out but I did install an aftermarket mag release I just haven’t had the time to invest in getting it out
Appreciate you taking the time to watch and leaving a comment!!!
@@Styxx2018always bud!
Nice video.
Thank you, Teach! Your comments always mean a lot!!! 🙏🤙🤙
@@Styxx2018 Anytime my friend
I’m not sure what’s going on brother but you’re the second person that I leave a comment on and somehow the comment disappears. I think you are onto something I think possibly like you said the screw hitting it ! I personally have had issues with the dagger series.. with that said I’ve heard that the micro daggers have issues .. but not as bad as the dagger …
Tell me about it, Brother! I actually tried to leave a comment on @GBGuns Table Top Review around 20x times and YT kept removing it. I would leave a comment, refresh the page, and it disappeared. I got so frustrated retyping my comment that I just copied it to my clipboard so I can just paste it once YT removed it. I finally gave up. Regardless, I appreciate you, Brother! 🙏🙏🙏
@@Styxx2018 of course my brother anytime ! Got to love it , lost subscribers, comments, likes , views lol jacking with the 2 A community! We don’t do it for money we do it because we love our community!
@@IROD808 Amen!!
come tf on man, I was praying that this thing was as reliable as a taurus, but you kind of solidified its not, my buddy got a MICRO and COMPACT and his micro continues to have Lght primer strikes and FTE
@@thePreparedFather I appreciate 🙏 you watching 👀 and leaving a comment. Not sure if your buddy has the optic version, but I luckily haven't had any issues since grinding that one screw down. Thank you, again!!!
@@Styxx2018 absolutely, and yes it is an optic with it! im gonna send him this video brother! thank you
Does the micro dagger take the 43x parts?
@@beatvilliansboochi8606 The trigger housing for the 43X is different (gen 5), but most parts are interchangeable.
@ thanks bro. I just order my micro lower
@beatvilliansboochi8606 Tyrant CNC has a great trigger shoe for the 43x that is phenomenal. Optic Planet has them for less than 70. Use HUMM code for 7% off. Swap out the weird hinged trigger shoe by PSA.
@ appreciate it bro