LETS TALK ABOUT HOW I RESTORED THIS BOAT🚤 | 3.9m Stacer | Lockdown Chat | ep 18

Поделиться
HTML-код
  • Опубликовано: 25 янв 2025

Комментарии • 51

  • @reelsalty1470
    @reelsalty1470 2 года назад +1

    Epic set up well done mate! Stoked.
    New subscriber frothin!

  • @davidspring4267
    @davidspring4267 11 месяцев назад +1

    Inspiring! I've recently bought a second hand seasprite 3.9 with a 15 hp on the back tiller drive. Love what you've done with your boat mate. Got some great tips off here

    • @lethosadventures
      @lethosadventures  11 месяцев назад

      Thanks bud glad you enjoyed it I’m actually creating another video now just finished restoring a 4.5 half cabin. ✌️

  • @Mark-jn3sy
    @Mark-jn3sy 9 месяцев назад +1

    Nice job mate 👍

    • @lethosadventures
      @lethosadventures  9 месяцев назад

      Thanks mark ✌️

    • @Mark-jn3sy
      @Mark-jn3sy 9 месяцев назад +1

      @lethosadventures recently bought an old school quintrex fishabout been slowly adding and doing things to it. Coming together slowly but rewarding

    • @lethosadventures
      @lethosadventures  9 месяцев назад +1

      @@Mark-jn3sy yeah 👍 it’s a good feeling when all the hard work is done.

  • @rossevans1774
    @rossevans1774 Год назад +1

    Nice job.

    • @lethosadventures
      @lethosadventures  Год назад

      Thanks 🙏🏼

    • @rossevans1774
      @rossevans1774 Год назад +1

      @@lethosadventures I had the same boat 'Seasprite' unpainted with a 15HP Evinrude tiller for about 20 years. My brother then had it for another 10 years with a 25HP Johnston tiller. When it was sold the hull was still in perfect condition, never had any dents, holes or corrosion. Great little boat that provided many memorable fishing trips.

    • @lethosadventures
      @lethosadventures  Год назад

      @@rossevans1774 yes it’s a great boat. Thank you for sharing :)

  • @Inosuke_Hashibira75
    @Inosuke_Hashibira75 3 года назад +1

    Beautiful job on the restoration

  • @philip4193
    @philip4193 2 года назад +1

    Great & informative video mate! I did a similar resto on an old alloy runabout 20 yrs ago using similar techniques (orbital sanding, rudimentary paint application, DIY floor & interior etc). The beauty with doing these old boats from scratch is that they're a blank canvas and you can customise the finished product to exactly match your needs. Wish I'd known your tip about only having to use the etch primer on new aluminium, as I etch-primed the entire bloody thing (20+ yr old weathered, scratched & coarse-sanded hull) and thus added several un-needed hours to the process it seems!

    • @lethosadventures
      @lethosadventures  2 года назад

      Thank you and I’m sure your boat came out awesome. It’s great fun restoring old boats. Abit challenging recording it at the same time but fun. Thanks 😊

  • @benturner-mann5786
    @benturner-mann5786 4 месяца назад +1

    With the r6 camera look at getting an md filter helps reduce the over exposure behind the thing your filming or look at fildling with the stteings a bit, love the work to this boat it inspires me for my one which is similar looking

    • @lethosadventures
      @lethosadventures  4 месяца назад

      @@benturner-mann5786 thanks glad you like the video :)

    • @lethosadventures
      @lethosadventures  4 месяца назад

      @@benturner-mann5786 good luck with the build

  • @kaylaluke5531
    @kaylaluke5531 2 года назад +1

    Your cool

  • @carolleth3003
    @carolleth3003 3 года назад +1

    Excellent very well exsplained

  • @stevebourke9769
    @stevebourke9769 3 года назад +1

    Great job.

  • @TOMS-d1c
    @TOMS-d1c 3 года назад +2

    ✌️✌️✌️👌

  • @kaylaluke5531
    @kaylaluke5531 2 года назад +1

    Cool hope Angelo will come back

  • @chrisrobinson4278
    @chrisrobinson4278 3 года назад +1

    Hey mate great vid, just wondering where about you got you little netted pockets from, the thing that’s has ur whistle in it ?

    • @lethosadventures
      @lethosadventures  3 года назад +1

      Hay bud I got them from eBay for about $8 for two here’s a link
      www.ebay.com.au/itm/2x-Medium-Car-Mesh-Storage-Holder-Adhesive-Net-Pocket-Phone-Bag-Card-Black-Truck-/114890668078?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=705-154756-20017-0

    • @chrisrobinson4278
      @chrisrobinson4278 3 года назад +1

      @@lethosadventures thanks heaps legend

    • @lethosadventures
      @lethosadventures  3 года назад

      @@chrisrobinson4278 no problem glad I could help ✌️

  • @salvxnb168
    @salvxnb168 3 года назад +1

    Great job mate! Just picked up the identical boat and will be doing something similar! Question.. have you taken it out on the ocean? Looking to only go out say 500m-1km on calm waters obviously.. can they handle it?

    • @lethosadventures
      @lethosadventures  3 года назад +1

      Hay bud thanks for the message. I haven’t taken it to sea yet we normally on the rivers. Im not sure how it will handle on the bar bit I know people and have seen people take smaller boats out to. I have has some close calls in this boat when the weather turn bad. It does start to fell a bit small in bad weather and big waves

  • @SandmannOZ
    @SandmannOZ Год назад +1

    Hey mate. So after two years how's the paint holding up? Looks great in the video. Reason I ask is that I recently got a '99 4.3m AllyCraft Intruder with a 40hp mercury that I'm slowly doing up. I've just finished gettiing it right mechanically and electrically and I'd really like to do the same as you did with the paint... but I don't want to pay someone else to do it if it's the sort of thing I can do myself.

    • @lethosadventures
      @lethosadventures  Год назад

      Hay bud I have sold the boat but when I had it the white paint at the bottom chipped a bit but not much. The reason it did is because I used a white one bit paint to do the bottom and not a two bit (with hardner). If I did it again I’d do the same thing. The reason I used a one bit paint is so if the bottom got damaged the paint will be easier to remove to weld the bottom.
      Hope this helps bud good luck ✌️

  • @RoryandCasey
    @RoryandCasey 3 года назад +2

    Hey Man, Great Video!
    I have exactly the same boat and was planning something pretty similar (love your idea of the hatch in the floor... may steal that). Just wondering which Bimini and Rocket launcher you purchased that fit?

    • @lethosadventures
      @lethosadventures  3 года назад

      Hi thanks for the awesome feedback really appreciate it. I use a 3 bow Bimini. I purchased it from eBay here’s a link www.ebay.com.au/itm/3-Bow-1-7m-1-9m-Black-Boat-Bimini-Top-Canopy-Cover-w-Rear-Poles-Sock-/191510454114?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=705-154756-20017-0 I’m planning on installing another hatch near the back seat aswell ✌️

    • @lethosadventures
      @lethosadventures  3 года назад

      Oh here’s the link to the rocket launcher it’s great highly recommended:)

    • @lethosadventures
      @lethosadventures  3 года назад

      www.ebay.com.au/itm/5-Rod-Holder-1-74m-174cm-Bolt-on-Rocket-Launcher-for-Fishing-Boat-Bimini-Top-/143853699444?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=705-154756-20017-0

    • @RoryandCasey
      @RoryandCasey 3 года назад +1

      @@lethosadventures Thanks mate! Legend!

    • @lethosadventures
      @lethosadventures  3 года назад

      @@RoryandCasey all good and good luck with the boat 🚤

  • @Beyondthebackyard-au
    @Beyondthebackyard-au 3 года назад +1

    Same size tinny as mine, but it looks a lot bigger due to the forward steer I think. Mine only has a 15 on it though, I often though it should have a 30 on it. Have you had any experience painting galvanized steel? I made a box from gal steel, used etch primer, then top coat. Within a month or so it was flaking off.

    • @lethosadventures
      @lethosadventures  3 года назад

      Hay bud before I painted the boat I wiped it down with a bottle of turpentine to make sure there was no Greece on the boat. On the bottom of my first boat seams to be flaking abit now but not much. Next time I paint the bottom of the hull I’ll use etch primer first it’s a bit more expensive but it’s will last way longer thanks bro 😎

  • @Kdjoao
    @Kdjoao 3 года назад +2

    How much you bought the boat for? Its so similar to mine. Planning to restore it

    • @lethosadventures
      @lethosadventures  3 года назад

      Hay bud got it for $3000 but wasn’t in good condition. But once I restored it now it looks way better. Hope to see your video if You Gona make one ☝️

    • @lethosadventures
      @lethosadventures  3 года назад

      It was a fun project. Just take your time and enjoy it bro

    • @Kdjoao
      @Kdjoao 3 года назад +1

      @@lethosadventures nice. Mine cost $2000 it have a 2014 30hp murcury on 4.3m tinny. But the tinny is old 1980 and need new paint job.

    • @lethosadventures
      @lethosadventures  3 года назад

      @@Kdjoao that’s cool aslong as the outboard is good along with the trailer, then you can redo the boat how ever you want it to look. Fix holes ect… Have fun bud tri make a video of you restoring it and send it to us so we can have a look 👀

  • @danielburgess6116
    @danielburgess6116 Год назад +1

    What Bimini is this?

    • @lethosadventures
      @lethosadventures  Год назад +1

      Hay bud I got it from eBay just search Bimini and you will see a few there