Hey mate great question, Cory fabricated this with the flex in mind. We have the two brackets mounted to the roof racks on the rear then the front of the boat secured down on the front roof rack. A few years in and we’ve had no cracks or dramas with this we’re quiet happy with it, if we do have any issues Cory can either fabricate something new up or repair it as he’s a boilermaker by trade.
Hey mate we used two rolls for our tinny we bought three incase and to have a spare incase it ever started lifting or it got damaged somehow. We appreciate you checking in! We’re currently on the road in SA so we’ll get a video together as soon as we can, possibly early June🤞🏼we have daily updates on our travels on our Insta and Facebook also 🙌🏻
Nice setup! Just a question on the engine size for this tinnie. Specs on the 250 Quintrex Explorer says max hp is 5hp. Did you have an upgrade on the hull to take a 9.9hp engine? Cheers.
Hi love watching your shows. Just question on the flooring couldn't quite get the name of it. if you could reply with the name and where you bought it from please. The outboard is it a short shaft?? Look forward to more adventures in 2022.
Hi mate how is your rack holding up with your boat on too please. Have you done much corrugated roads with it on as I’m planning on doing a similar set up. 👍🏼
Cheers for subscribing mate, the boat rack is a C&C exclusive one of a kind 😂 Cory loves fab work & a neat job, we are running the stedi work lights on the awning side & rear, we also have the light bar & spot lights on the front 👌🏻
@@louisestone-weatherly5517 yes hasn’t lifted yet, obviously when putting it down make sure the surface is clean/ day and that there’s no lifted areas 😊
Great tinny build and beautiful first ever Barra. Nice work!
Thanks mate we are stoked with the set up 🙌🏻
Awesome setup my friends. Greetings from San Diego California .
Thanks Mate has been the best addition to our set up 🙌🏻
Great video guys . I’m thinking you need some of my sun / fishing shirts
Cheers mate! Appreciate you tuning in 🙌🏻 we can’t say no to a fishing shirt, we’d love one, flick us a message 🍻
How do you go with flex between cab body and Ute tub.
Looks like a solid mount between the two...
Not a good thing long term as you will get cracks
Hey mate great question, Cory fabricated this with the flex in mind. We have the two brackets mounted to the roof racks on the rear then the front of the boat secured down on the front roof rack.
A few years in and we’ve had no cracks or dramas with this we’re quiet happy with it, if we do have any issues Cory can either fabricate something new up or repair it as he’s a boilermaker by trade.
You are SOOOO blessed. Well done.
Thankyou we are really happy with the way our tinny has come together 🙌🏻
Sweet Tinnie !! I think I use that flooring in mine. Any issues with it ?
great setup guys... happy adventures
Thankyou we are pretty happy with how it’s come together 🙌🏻
How many rolls of the EVA flooring did it take to do what you have done?
Also I'm missing you guys on RUclips and plans for some more videos?
Hey mate we used two rolls for our tinny we bought three incase and to have a spare incase it ever started lifting or it got damaged somehow.
We appreciate you checking in! We’re currently on the road in SA so we’ll get a video together as soon as we can, possibly early June🤞🏼we have daily updates on our travels on our Insta and Facebook also 🙌🏻
Nice setup! Just a question on the engine size for this tinnie. Specs on the 250 Quintrex Explorer says max hp is 5hp. Did you have an upgrade on the hull to take a 9.9hp engine? Cheers.
Thanks mate, That’s how it was when we bought it 2nd hand 👍
Hi love watching your shows. Just question on the flooring couldn't quite get the name of it. if you could reply with the name and where you bought it from please. The outboard is it a short shaft?? Look forward to more adventures in 2022.
Hey mate cheers for watching! Floor name is Eva Flooring we got it from eBay. Outboard is also a short shaft 👍🏻
Try fishing for cold water crocs in the rivers around Goulburn.
😅😅😅 I reckon we would be a small snack for the crocs in our tinny mate 🤣
Hi mate how is your rack holding up with your boat on too please. Have you done much corrugated roads with it on as I’m planning on doing a similar set up. 👍🏼
Yes we’ve taken the setup to Arnhem Land no issues, we’ve also been through some tough 4x4 tracks to and it’s still solid 👍
Really like the detail on the seats, are they stickers?
It’s called EVA Marine flooring, thanks for watching!
Sweet setup, cleanest boat rack I’ve seen. What lights are you running on roof rack on the sides they look great new sub
Cheers for subscribing mate, the boat rack is a C&C exclusive one of a kind 😂 Cory loves fab work & a neat job, we are running the stedi work lights on the awning side & rear, we also have the light bar & spot lights on the front 👌🏻
Sweet setup, mate. How fast does the 250 Explorer go with the 9.9hp?
Ta
Cheers mate, about 23 knots
@@cncroadtrips6415, thanks for your reply. That is beast mode, 23 knots is about 42kph, awesome little bullet of a tinny
Great video mate. How do you find the stability of the tinny when standing up and fishing solo and with another person? Thanks
Thanks mate, it’s been great they are a solid little boat and very buoyant
@@cncroadtrips6415 good to hear, I just bought one with a Yamaha 5hp. Keep up the good content ✌🏽
Nice job mate
Cheers mate 🍻🍻
Hi ya wat did u use as an added adhesive for the eva foam ? :)
It has a 3m backing so no additional adhesive required
@@cncroadtrips6415 ok and it has remained in place ?
@@louisestone-weatherly5517 yes hasn’t lifted yet, obviously when putting it down make sure the surface is clean/ day and that there’s no lifted areas 😊
Did you fill in the gaps on the floor? Or did you just stick over them?
Nah just stuck it straight over, still going strong 💪🏼
Ta ..
Well done.
Also was going to ask is this boat a 250 explorer
Yeah it’s a 255 explorer, it’s 2.6m in length a perfect fit for the Dmax 👌🏻
Very nice setup. What is that foam thing called again, and where to buy it?
Cheers
It’s called “Eva Marine Flooring” we purchased it through EBay 👌🏻
@@cncroadtrips6415 Thank you!
Thanks
Hey mate how much does it weigh
Surely you didn't eat that swamp donkey?
That tinny runs best with a 15 or 18hp
Its like 8 foot long !
@@stevenmorris2293 yeah look up tinny edit and you’ll see what I mean