Thanks for the service procedure page! Testing my daughters 2010 Forester Ignition Coil it was the primary readings that were off. I was getting 1100 ohms for both 1-2 and 2-4 readings. Spark plug and plug wire were good.
One thing about the spark plug coil. Even if the resistance is correct, it doesn't mean the coil is good. It could have a crake in the plastic and will arc over to ground. To eliminate the coil, swap it with another cylinder. If it was the coil, the problem will have moved.
Very good! No excess chatter, slow and thorough = easy to understand.
Thanks for the service procedure page! Testing my daughters 2010 Forester Ignition Coil it was the primary readings that were off. I was getting 1100 ohms for both 1-2 and 2-4 readings. Spark plug and plug wire were good.
thank you for posting this- enjoy your voice, tempo, and expertise- great job!
Thank you. This is what my problem
Is on my 2002 legacy
One thing about the spark plug coil. Even if the resistance is correct, it doesn't mean the coil is good.
It could have a crake in the plastic and will arc over to ground.
To eliminate the coil, swap it with another cylinder.
If it was the coil, the problem will have moved.
Thank you for the video good sir!
Thank you sir👍
you are awesome
Thanks!
Please Make a video of cvt fluid Chang e. 👍
Fuel injector? Perhaps?
Are you swiss by chance?
What’s the correct gap?
I have p420 p304 and p303. What's can the cause be?
mystery man catalytic converter
Mine did that also changed all 4 s/p & wires CHECK ENGINE lite went off for 30 days
But came back on
Curious to know what your outcome was. Was it the ignition coils?
@@katerpillarrrbug
Just recently got H/G light on & off don’t care as long as h/g don’t leak
you talk too much .. and no action
هههههههه قصفته
The whole video was Action sharmuta