Lesu vs Tamiya transmissions

Поделиться
HTML-код
  • Опубликовано: 21 ноя 2024

Комментарии • 34

  • @nrs91
    @nrs91 3 года назад +1

    I used to love the 3spd Tamiya transmission but they are bulky and have a lot of free play in them so now I make and sell my own single speed transmissions now which make the trucks drive at a brisk walking pace with lots of torque.
    Combined with the new Hobbywing Fusion Brushless Motor/ESC makes a really compact set up so you have more room for electronics.

  • @artagain8977
    @artagain8977 Год назад

    New to the hobby. Thanks for sharing this!

  • @CarminesRCTipsandTricks
    @CarminesRCTipsandTricks 3 года назад +1

    SLOW is King with my Rigs.... I've put 4-1 Gear Reduction Units in all, with 35T Crawler Motors, with great results! All Tamiya 3-Speeds.
    Da thing about the LESU dat I like, would be that they lock when stopped. I carry HEAVY loads (50-75lbs!!) 😳 The ability to hold on a Hill, would be good.
    Thing about Grease..... If you can find "Super Lube", buy it! It's A synthetic Silicone Grease, plastic safe, but best of all - dey STAY on the Gears!! 👍👍 No flinging off, like nearly every other Grease. Not expensive either.
    I have one Hercules Hobby Truck. People love to put them down..... People who DON'T have one! Unlike Tamiya, they actually come with BEARINGS!! Good stuff.
    I LIKE your "spare parts" Dump Truck! Hopefully I can find video on how you built it.

  • @hennieschoeman8395
    @hennieschoeman8395 2 года назад

    Nice bro please make a video off a truck assemble pleas because i see plenty videos but you are real so thanks bro

  • @martinsrc8752
    @martinsrc8752 3 года назад +1

    Very informative and interesting video. If you could turn audio slightly up? Sometimes it's very quiet..

  • @CarminesRCTipsandTricks
    @CarminesRCTipsandTricks 2 года назад

    Tamiya's good point... reliable. They will run for YEARS. I know Leslu is awesome stuff, the gearing is definitely correct.
    I'm running a Tamiya 3 Speed with a 4-1 Gear Reduction Unit, all Metal.... NOISY!! But the Tamiya is WAY too fast on its own.
    I also have a Hercules Hobby Truck. LOVE that dey use Brass Gears instead of Aluminum, which turns your Grease into silver PASTE. (Worst thing about Tamiya!)
    I'm happy with the Gear Reduction Unit, but I do want to try a Leslu

  • @ecrcmodels
    @ecrcmodels 3 года назад

    Nice video, thanks for sharing your experiences!! Did you make the tipper bed for the dump truck? Is there a video for that?
    Thank you

  • @mpkhobbyRC
    @mpkhobbyRC 3 года назад

    Great video man! Thanks!! Very helpful!!
    Lol i know the feeling! Right when you said, "thats not good" lol

  • @MB-qj8yo
    @MB-qj8yo 3 года назад +1

    Cool vid and very nice trucks! I'm looking for a 2-3 speed transmission for my king-kong ZIL-130 project. Which transmission (OEM tamiya or lesu 2 speed without transfercase) is the fastest and the most quiet?

    • @everythingrc3050
      @everythingrc3050  3 года назад +1

      I'd go with the lesu I like it great transmission

  • @WombiiActual
    @WombiiActual 3 года назад +2

    Great video. Thank you!

  • @g-manracer1997
    @g-manracer1997 2 года назад

    What's your overall opinion on Hercules Hobby trucks compared to Tamiya? I'm wanting to buy a Scania, and Tamiya has always been the best in quality and detail, so I dont mind the fact they're a little more money. I'm just impressed that the Hercules trucks come with bearings, opening cab doors, and some say better axles.....
    What is your opinion on the 2 brands?
    Pros or cons?
    Thanks for your great info on these trucks.

    • @everythingrc3050
      @everythingrc3050  2 года назад +1

      Well I love my Hercules hobby arocs , but it dose have a few quirks but nothing crazy , I my self is for a new truck I'm thinking of getting a scania 4x2 from Tamiya . Overall I think it's just as good as the Tamiya , after you take care of the few Chinese model stuff but ya by one you'd like it

    • @g-manracer1997
      @g-manracer1997 2 года назад

      @@everythingrc3050 thanks again 👍

  • @IanSparksRC
    @IanSparksRC 3 года назад +1

    They are meant to be slow, it’s a truck
    What turn motors do you use?

    • @everythingrc3050
      @everythingrc3050  3 года назад

      I use 35t and also stock silver i know they suppose to be slow but drive my trucks on a very large area and i need little speed so they dont take a long time to cross it .

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 3 года назад +1

    lesu is more life like and has the strong ur paying for that metal gears more pulling power .

    • @everythingrc3050
      @everythingrc3050  3 года назад

      Ya I get that but still high price for everyday guy, I'm actually looking to get o e of the 2x4 tractors

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 3 года назад

    can u please show more . another look at the lesu box. all set up how u have it . mine is messing up . and shift is at the back dont know how to swap to front mate help please

    • @everythingrc3050
      @everythingrc3050  3 года назад

      Some are like that . it seems it depends on the box and what lesu put it on. I rather of use the back shift. But it wasn't available when i got these.

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 3 года назад

    hi mate . where did u find the front axles. i cant find anywhere at all

    • @everythingrc3050
      @everythingrc3050  3 года назад

      They are from a old tamiya monster truck called a tlt mini gear . but they are getting really hard to find the tlt-1 is a mid 90's truck so tbe parts and axles for them are getting really rare

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 3 года назад

    hi mate i have a lesu motor and box . duz your gearbox make a loud sound from it. . mine is and i dunno whats going on. . i have a lesu box 8x10

    • @everythingrc3050
      @everythingrc3050  3 года назад

      Ot did it was loud , but i took it apart and added some good hi molly gease and its smooth now .

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 3 года назад

    a link for axles would be nice thank you

    • @everythingrc3050
      @everythingrc3050  3 года назад

      Look on ebay they are getting hard to find because the tlt is a really old discontinued truck.

  • @johng7622
    @johng7622 3 года назад

    Try locking the Tamiya transmission in 2nd gear

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 3 года назад

    what colour is it on the bottom of your trucks .