Impressive man. Can you please also do a more detailed video on the internals of the block as well. Rebuilding the block.. piston, piston ring etc. Thank you a lot..
I actually didn't take apart the lower half of the block - pistons, cams etc but maybe that'd be a great vid in the future now that the channel is gaining traction!
Love the videos thanks so much! Do you have any videos or read recommendations on the process of painting and sand you used for wet sanding grits and process for the rocker cover? The engine bay looked amazing!!
I've done research and watch heaps of videos. But I've also failed plenty of times as well :P Its worth it to get some quality paint as well, I've had clear and base that weren't compatible for some reason and produce a crazy wrinkle finish!
Should be one of the next ones, maybe episode 6? I use a clutch alignment tool for the clutch and flywheel, bolting the transmission was pretty straightforward too :)
Hola!! tengo un nissan A12 y quiero hacer lo mismo pero no encuentro los torques, tenes algun manual? Hello!! I have a Nissan A12 and I want to do the same but I can't find the torques, do you have a manual?
That was about a weeks, job. Mainly waiting for paint to dry, but working on parts in the meantime. more after shots of the engine coming in the next episode!! :D
@@32Builds what I was doing to knock surface rust out was taking the vinegar in some paper towels and just kind of putting the paper towels over the areas that I wanted to clear the rust out of and then soaking it with the vinegar and leaving it overnight. Worked pretty good but I took a wire brush to the deeper rust issues.
@@SunSweepingServices Have a go at trying stripper wheels instead, its made out of 'Silicone Impregnated Nylon' and kinda looks like a sponge. It works way more effective if the area is fairly accessible :)
i own two of this engines and not far from where i live a lady Is selling a Datsun 1980 210 A 12 engine i hope i can buy it if price Is right ,great video by the way Is of great help💎💎💎💎💎💎💎🔧🔧🔧🔧⛽⛽⛽⛽⛽
you are such a character with this car of yours
Hell yeah Permatex No 3. Best kept secret to reuse gaskets forever. Don't spill it lol
I'm here from my summer car and the engine is 100% real
Only here the gearbox is rear-wheel drive and the motor is the same
@@vitalikprabelium6740exept the datsun 100a uses the A10 and this is the A12
Fleetari Shop😅💪🏻
3:57 I like that you made it beat to the music lol. Nice video :)
Right?!
The rocker cover turned out beautifully. As for the episode lengths, I reckon longer @ 15mins is about perfect with the extra bit of detail included.
Cheers Alan! I'll make sure to not only include more footage but also go into more detail of what I'm doing! :)
Thanks for the video, rebuilding my 2 - L16’s for both my Datsun’s great inspiration! I appreciate the upload.
Cheers for watching! Man those'd feel great in a Sunny!
Through your channel am fully inspired to buy a datsun it isnt bad as i thought earlier.
3:57 was perfectly in time with the music woah
😁
ikr...i new it couldnt have been random
Beautiful work
Tongs and no gloves, like a real man does it 👍
Hahahaha gloves break easy when cleaning and tongs are just my regular balcony west hahaha
Молодец,постарался на славу,похвально=)!
Thank you! :D
Beautifully done
Thank you so much 😀
Impressive man. Can you please also do a more detailed video on the internals of the block as well. Rebuilding the block.. piston, piston ring etc. Thank you a lot..
I actually didn't take apart the lower half of the block - pistons, cams etc
but maybe that'd be a great vid in the future now that the channel is gaining traction!
The colour is B.S. 18C39, with Glidden number GL31557, and Glidden number name 'Dolphin Blue'
Ooh cheers! That's something I gotta write down!!
Hey man this is super cool!
Cheers!!
awesome episode mate
Thanks! :)
❤ good job
Looks amazing!
Cheers! :)
Great young man✌
Cheer!
Muy buen trabajo! Felicidades!
you are doing great stuff bro.Kindly asking where to get aftermarket parts for my datsun 320 1963
looking good moite! she's mickey mouse ! motor looks like a bought one 👌👌👌
Love the videos thanks so much! Do you have any videos or read recommendations on the process of painting and sand you used for wet sanding grits and process for the rocker cover?
The engine bay looked amazing!!
I've done research and watch heaps of videos. But I've also failed plenty of times as well :P
Its worth it to get some quality paint as well, I've had clear and base that weren't compatible for some reason and produce a crazy wrinkle finish!
Great videos bro, would love to know where you source the replacement parts from and think like that. Looking forward to some more videos
I get everything from ebay!! Alot from bprojects (aka. datsun1200.asia) which has their own ebay store.
Fleetari bro
Bro longer videos are better 👌 watching this complete build series cant wait to see the end results
Thanks for your input!! I can't wait as well! Making the most of iso and pumping this out as much as I can!
Hi! Just wondering if you had a video on the flywheel and clutch install then marry up to the transmission?
Should be one of the next ones, maybe episode 6?
I use a clutch alignment tool for the clutch and flywheel, bolting the transmission was pretty straightforward too :)
Yo, your work is incredible! Is it possible for you to list all the material and tools you used during your restoration? I’m begin to restore at 510.
I have a Datsun 120y, the body work is terrible. I need assistance sir. am in Nairobi, Kenya.
Haha good luck bro! My one was in pretty bad condition as well!
Great job! its a lot of work cleaning up an engine. looks awesome. I would say for a video like this 15 mins is good. where in Australia are you?
Cheers Charles! I'm based in Sydney!
Hola!! tengo un nissan A12 y quiero hacer lo mismo pero no encuentro los torques, tenes algun manual?
Hello!! I have a Nissan A12 and I want to do the same but I can't find the torques, do you have a manual?
Great job. Whats is the color code of the blue paint?
Thank you! Not exactly sure, I'll check again once I revisit my auto paint store. It was some sort of turquoise blue.
What did you used to polish the timing cover
Hey mate, the rocker cover is painted with high temperature paint?
Woah, great episode, looks so tedious! How long did it take? PS would love to see some before and after shots of that engine 😁
Nevermind! It's in the thumbnail 🤦🏻♂️
That was about a weeks, job. Mainly waiting for paint to dry, but working on parts in the meantime. more after shots of the engine coming in the next episode!! :D
brother please could you tell me which glue is the one you use for the guntas it looks like brown color I am going to repair a datsun engine
Its 'Aviation Form-A-Gasket 3 Sealant' by Permatex
Have your tried vinegar to remove rust?
Yeah vinegar worked for me for light rust but took a while to get a decent result :)
@@32Builds what I was doing to knock surface rust out was taking the vinegar in some paper towels and just kind of putting the paper towels over the areas that I wanted to clear the rust out of and then soaking it with the vinegar and leaving it overnight. Worked pretty good but I took a wire brush to the deeper rust issues.
@@SunSweepingServices Have a go at trying stripper wheels instead, its made out of 'Silicone Impregnated Nylon' and kinda looks like a sponge. It works way more effective if the area is fairly accessible :)
@@32Builds bonza! Thanks!
2:24 What's song?
Take You Home Tonight - Vibe Tracks
in this case you can not do valve clearence with the engine running
You re better off taking it to fleetari he knows better
I am diesel mechanic good job all nice very very thanks
Thank you!! :D
Everyone enjoyed length... video length I mean
Nice thank you!
Here I thought it was unrealistic that you can just build and move the block by hand in the game
Furniture dolly always comes to save the day :D
👍
i own two of this engines and not far from where i live a lady Is selling a Datsun 1980 210 A 12 engine i hope i can buy it if price Is right ,great video by the way Is of great help💎💎💎💎💎💎💎🔧🔧🔧🔧⛽⛽⛽⛽⛽
Thank you so much, glad to hear :) So far I'm in love with this motor haha - so simple and easy!
Its my summer car on real life
Haha, not the first time I've heard that one!
養生しないでガシガシ塗ってくの草
I hv the same engine do u perhabs come from South africa i want u to do same thing to my engine its fxcked up even rust is going to take over
Если надо компресор есть, такой ванька стоит в разбор
😁
#MySummerCarFans
#FinlandFerrariDatsun210
#FinlandF250Datsun1200