Dewalt Folding Workbench DWST11556 Tool Review, Drop Tests
HTML-код
- Опубликовано: 3 авг 2024
- In this Dewalt tool review video, we review the DeWalt DWST11556 Express Folding Workbench, putting it through the rigors of use. This Dewalt Folding Workbench DWST11556 Tool Review video will also show you drop tests performed on this dewalt folding workbench. This Dewalt folding table could end up being one of your new dewalt tools 2020. One of h first things we noticed wash ow fast this dewalt express folding workbench opens and closes, probably about 1 second or 2 seconds.
🛒 DeWalt Folding Portable Workbench (at Home Depot) homedepot.sjv.io/Qo9vo
🛒 DEWALT DWST11556 Express Folding Workbench (at Amazon): amzn.to/2qsaRdi
🛒 Keter Folding Table Work Bench with Clamps: amzn.to/2QkEDea
🛒 DeWalt Deep Pro Part Organizer with Metal Latch: amzn.to/2rlK5Ud
🛒 Milwaukee 0880-20 18-Volt Cordless Wet/Dry Vacuum amzn.to/2P6VaAF
🛒 DEWALT DCS575T2 FLEXVOLT Brushless Circular Saw, 2 Battery Kit, 7-1/4" amzn.to/37Rd1De
📺 Also WATCH: Keter Folding Work Table Tool Review, DROP Tests Work Bench:
• Keter Folding Work Tab... after you view this dewalt folding table tool review.
Dewalt folding workbench review with drop testing
We bought this dewalt folding workbench at home depot. You'll see us put this dewalt folding portable workbench through a number of tests including drop tests from heights of 5 feet and 9 feet. This Dewalt Express Folding Table is also known as the dewalt dwst11556 by modle number. The DeWalt dwst11556 express folding workbench can be used to hold a miter saw, and it can support up to 1000 pounds of spread out load.
Dewalt express folding workbench review
We hope you enjoy this dewalt tool review, and we hope you have enough information to decide if you want this dewalt work table.
Be sure to view our other tool review videos besides this Dewalt table review that your host Jeff Ostroff produces for you and thanks for watching this dewalt work table review.
#jeffostroff #dewalt #dewalttools 
Хобби
🛒 DeWalt Folding Portable Workbench (at Home Depot) homedepot.sjv.io/Qo9vo
🛒 DEWALT DWST11556 Express Folding Workbench (at Amazon): amzn.to/2qsaRdi
🛒 Keter Folding Table Work Bench with Clamps: amzn.to/2QkEDea
🛒 DeWalt Deep Pro Part Organizer with Metal Latch: amzn.to/2rlK5Ud
🛒 Milwaukee 0880-20 18-Volt Cordless Wet/Dry Vacuum amzn.to/2P6VaAF
🛒 DEWALT DCS575T2 FLEXVOLT Brushless Circular Saw, 2 Battery Kit, 7-1/4" amzn.to/37Rd1De
Got it, love it!
Yup! I might buy one or 2 more.
This is a pretty solid little workbench. While once you figure out how it comes together, it is physically Easy to assemble ruclips.net/user/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh by yourself. But the diagrams explaining the steps are really pretty bad. I could not get the handle pins in all the way despite multiple attempts, so I just used a screw I had on hand for the 2nd handle. I could not get the first pin in further or pull it back out. You are supposed to hammer it in, but I had no leverage and the handle is plastic and I did not want to risk breaking it. I will get a lot of use out of the bench because of the convenient size and height. It does fold up nicely for storage. They even explain how to fold it so you don't get pinched...that is important!
There's my crazy neighbor throwing stuff off his roof again 😂. Nice review. Just got one at the sale price. Handy table.
awesome deal!
OMG!!!! Jeff, good deeds sometimes are rewarded. Late last night my wife and I went to Wal Mart for baking supplies to make cupcakes for our son's restaurant Valentine's day dinner tonight. While she was getting the supplies, I was toodling around and I always check the clearance aisle. Ever since you posted this video and the Keeter one and the updated Sam's club price. I've been looking for one. I found a Keeter at our Wal Mart for $49 clearance and I talked to a manager and he couldn't lower the price yet, that was 2 days ago and it was not where I saw it a few days before. We both thought it was sold. They moved it to make room for mowers. I found it on another aisle and it was marked down again for $30 that's 9 cents from the Sam's club price and the nearest Sam's Club is 40 miles away. I'm Blessed !!! Thanks be to God 🙏🙏 and I Thank You for sharing your thoughts and videos, especially like the walk around videos, Ridney
Way to go Rodney you beat me by $9 I got mine 39.99 back in December if you saw that walkthrough we didn't Sam's.
I love that you caught that design error! Also this review was extremely effective and my timing seems to be perfect, so I just ordered one!
Glad it was helpful!
Thanks, you showed me how to open it when I was trying to figure out how to do it.
Glad I could help!
Also sold under the Irwin brand internationally. Irwin Quick Grip clamps and their copies all have a clip on/off system so you can put them thru 3/4 holes, keep the operating handle on top so no crawling about on the ground to operate.
Good, I hate that crawling around
I've got this workbench, and when it's on sale, I'm going to buy another. It's just too easy and fast to set up, and it's substantial. You're right, it takes about one second tops. I also have the white table you show at around 6:30, and while it has its uses, I usually just need a temporary working surface, and I don't want to take all day and half the night to set it up. Anyway, thanks for the video, and thanks for throwing the workbench off the roof. Now I know I can do that with confidence. lol
Awesome table, thanks for watching
Good video :) I like how you trust your patio flooring to not get chipped, or that the table not going to do funny roll back to kill your grill or windows :)
All worth the risk!
Great review, and good suggestion for waiting until Home Depot puts these on sale. Followed your advice, and waited till they went on sale. Saved $20.00! Thanks!
Glad I could help!
That DeWalt work table is pretty sweet. I like the fact that it has a carry handle and locks shut for ease of transport. I don't have this work table but would def check it out. I do have the Worx Pegasus work table which is a bit cumbersome to tote around since it doesn't lock shut nor does it have a carry handle like the DeWalt. I will say that one thing I do like about the Worx is you can attach more Worx tables to it expanding it's size two or more times. The Worx also come with two speed clamps and 4 plastic dogs built right into it along with a lower shelf for additional storage. I don't know much about the Keter work table but they all look well constructed. Thanks for sharing your review. Cheers!
Thanks William, glad you liked it!
Great review! My next purchase for sure since I am guilty of using those stupid tables as well. 😂 Dewalt shines with this one. My Milwaukee tools will look good on this table. 👌 Like and sub
Thanks for the review! I particularly like the precisely calibrated roof drop test 😆
That's always my favorite part getting to destroy things or find out if they are indestructible
They put the button in that direction becuase it would look stupid upside down when the table is standing
Best foldable work table ever!
Yeah man, I saw it in your video on cutting the quartz today.
Just as you brought up the possible Miter Saw stand I was thinking the same thing. Not nearly as cumbersome as the Dewalt dedicated stand and way more useful for other things. Thanks for the overview and test.
You bet!
@@jeffostroff do you anchor the miter saw to the table?
I have one of these, it’s great how easy to open and close, just latches right up. Very sturdy. And the carry handle situated perfect. Just walk like it is luggage. At 69 bucks well worth it, it was 99 bucks HD.
sometimes Amazon has it around $80 too
Just bought one, and excited to put it through its paces. I was a little disappointed that the top dips down in the middle by about a 1/4", but I don't see myself doing any exacting work on it. By the way, you might want to turn off the auto-iris function
Yes we have been using manual focus mode lately
Someone mentioned the holes can be used for bench dogs, but will also work well with L style track saw clamps like those made for the Festool, Makita, etc track saws.
I should try that sometme
I have a set of the Dewalt trigger clamps. As you stated the clamp is prevented from sliding off the bar. However, using a grinder or a steel file you can grind off the stop on the bar. FYI, Dewalt does sell a more expensive clamp that has a button to remove one clamp end.
Have one and it’s great. Has some damage from just using it daily but man it won’t die. I use it as my miter saw stand and I have the adjustable husky saw horses. Together it’s perfect.
I use it also for filming a lot of my tool review videos, and close-up shots of the tools.
jeffostroff nice!!! You’re definitely doing a great job. I was thinking about checking out the worx Pegasus as well as the husky. Any thoughts?
@@seankadar9550 I've heard people say it's decent, many like the dogs that come with it. But ti's pricey, well north of $100. We watched that closely at Christmas time, and it did not drop in price at Lowes.
jeffostroff yeah it definitely is more pricey for sure. I do like that you can link them together. Wish you could do that with the Dewalt. I was watching your channel a lot hoping to score a deal. Maybe this Christmas will be the year.
Have 2 of these. Love them. 👍
You're greedy! That's it, I'm going for 3!
Great video On the Dewalt table Jeff. I especially enjoyed the one on the Keter table. I’ve shared it with a few people who didn’t know about your channel. I have one question. Would the Dewalt and Keter tables function well as a stand for the Dewalt series jobsite table saws?
Yes, I think they would both work well, they are stable. The table saw looks like it would fit no problem. In fact, I'm looking to replace my large Ridgid Rolling table saw with a flex volt DeWalt saw if I can get one small enough, and would use either the Keter or DeWalt able to set it on. Just check the dimensions of the table saw against the top of the work benches to make sure it won't overhang. Might even be a good idea to clamp it to the table top some how.
jeffostroff thanks for the quick reply...
I just bought this for my table saw works perfect
I use it for everything now
@@jeffostroff it's a great table easy to open easy to close I'm thinking about getting another one
Good job Jeff, thanks 👍
thanks Michael, glad you liked it!
Great review Jeff. I am primarily a woodworker, so whenever I see holes like that on a workbench, my first thought is that they are there for bench dogs. Can you confirm that you can get a 3/4" bench dog into those holes?
The holes are 7/8", so 3/4" dogs should fit.
I like your review of this DeWalt folding workbench, well done. Do you know of any clamp dogs that would fit the holes on top?
It's on my bucket list to find some!
Nice I been looking to buy one,
Fantastic review good work
Glad you liked it!
Great review.
Thanks, glad you like it!
Which clamps and bench dogs (or other devices) will work/fit with this table? From large wood projects to small electrical conduit cuts and bends.
I have not yet picked out any dogs for this table yet, hope to soon to find out, then maybe do another video on the dogs
This table is fn great.
I use mine almost every day, love it
Good job except that timing the slow motion white table opening, I have a few of those and have never turned them upside down to open, just open while on its edge, pull open legs and flip upright, 6 seconds tops if you are timing it.
Been eyeing this table for a few years, time to pull trigger, thanks for showing the durability by throwing off roof.
Thanks for the tip
Thanks Jeff, is there a way to hook 2 of these length wise or side ways, clamps maybe ?
clamps might work and since they have holes along the side edge of the tabletop, I bet you could stick in some rods that are enough width to fill the hole, then these rods would align the tables and help keep them together.
I've just purchased two of these for the $69 sale at HD. Do most bench dogs & hold fasts be used with this bench? I believe I do have clamps where you can separate the jaws for easier positioning in the holes of the table, but I think I have to go through the trouble of unscrewing a screw each time I want to set them up in the table unless I leave a few in the wholes all the time. Maybe they have other clamps out there where you just push a button to remove the two jaws?
I need to experiment with this myself and find out. I want to be bale to anchor my miter saw to the table
I know it's been a long time, but I'm trying to figure out if your saw is secured to the bench or not. If so, how did you do it. Does it even need to be secured?
I saw it at my local HD for $69 and it rung up for $99, had to correct the lady at the register. If I didn't catch that, I would've been out $30. The lady told me that I was reading the price on the back of the box, but that wasn't really true.
Yes, that is the only time to buy them, when they drop to $69.
My favorite
I use it almost every day
Just watched ur vid n checked my local Hd. 69.99. I know what I'm doin tomorrow. LOL
You'll love it!
Would this table be sturdy enough as an out feed table for a table saw?
Yes on a level flat surface it will be just fine I plan to use it to hold my miter saw so certainly as and out feed table it would be perfect
The word push is there as extra because it looks better when the bench is up. I prefer it that way because I don't want to see that upside down when it's opened. Makes it look cheap and defective. It's more of a common sense thing to stand in the way of the legs opening.
I assume that you know that those holes are not meant to store tools, but are 20mm holes to insert bench tools such as clamps, bench cookies etc. It's the plastic version of the UJK Parf system.
I assume you didn't actually watch video, because at 6:50 I actually showed you the holes were made for clamps and showed them being used there.
jeffostroff That's not what I mean. After putting a bunch of screwdrivers in the holes, please invest some time to look up the various YT movies where you learn all about the real purpose of those holes. I watched your vid twice. Wondering.
Turn clamp upside down. Then you won’t need to separate
Good idea, will try that, but I don't think it will help you on the small circular hoes. Because you still need to separate the 2 sides of the clamp, once must be below the table the other must be on top of the table.
Or just remove the stop from the end of clamp 🙄
Someone needs to make a list of compatibility to know which clamp works for this table because I"m having a hard time to choose for my freefoam cuts
I wish dewalt made a list
You should take a look at this bench from dewalt
46 in. x 18 in. Adjustable Height Portable Folding Steel Welding Table and Workbench
I will research that thanks
@@jeffostroff it’s all Harvey duty metal and here is the link from Home Depot www.homedepot.com/p/DEWALT-46-in-x-18-in-Adjustable-Height-Portable-Folding-Steel-Welding-Table-and-Workbench-DXMF4618WT/313076547?NCNI-5&searchtype=history
And thank you for everything you post it’s so helpful.
Just giving you the heads up I got this folding stand for 69.99 just like you said.
Awesome! Was this in southern CA? We are still full price $99 here in FL.
jeffostroff yup that’s right Southern California. Compton store to be exact.
Just bought the bench here in north Edmonton Alberta Canada 155.00 gst included nice thankyou for the video it was great me have been dewalt since black & decker lol ling time ago lol again thankyou me wont be that rough with the bench but nice anyway :)
Hi Jeffostrof,
Is it the same what Stanley FatMax Express? Look identically.
how would i secure the miter saw to the table?
I picked up one today for $69 at Homedepot.
Sweet, I wish they would go on sale in our Home Depot again, still $99
@@jeffostroff after watching your video couple days back(which I do not see it anymore) using zip code 94040, I showed it to the floor manager and he gave me $30 off, thanks to you
4:25 your thoery could be wrong, maybe the reason why the button is the way it is because the button would've been upside down if the table was upright.
I might play with that button some more
the word push will read correctly when its set up.
Very very kool video
Glad you liked it
I bought one of these (on sLE at $99, down from $119) in 2023 and it has never opened up easily. (It closes up normally - quite fast.) Any suggestions on getting "kinks" out of the mechanism or fixing the button assembly? Does it take a lubricant or something?
I have never had to lubricate but you can try a lithium grease in all the moving joints
Mine has slowly gotten more difficult to open too since it was new a few years ago. I was thinking I needed to oil or grease something to get it easier to open.
Im a little late to the party. Lowe's has a brand that the side handle retracts into the body. Does the black handle on this not retract in when the table is open?
The handle stays outside doe snot retract
@@jeffostroff thank you. Not too much of a bother that it doesn't?Thanks again in advance.
Just subscribed to your channel. I think the holes in the table are for bench dogs.
They can be used for both
I know this an old video, but your comment about the "PUSH" button being upside down made me comment. in my opinion, they have the button correct. If it were the other way, it would drive me crazy every time I saw it after it was set up. it would be upside down. That, in my personal opinion would be worse than the way it is. also if someone has trouble figuring that out, then maybe they shouldn't be using any tools. 🤣
I don't even look at it now, I just push the button, so either direction works once you how to use the button
Stanley makes that and all tool boxes for dewalt
Keter makes the tool boxes, and likely also the workstation
Keter or dewalt work table??Which one's better?
I prefer the dual table it just sets up a little bit easier with the keter your table you have to bend all the way down to the ground and kind of forcefully pull it up if you have a bad bag that would not be a table for you
@@jeffostroff thanks the info:)
Where'd you get that cool clock?
Bought it off amazon from cheap chines company, poorly written manual, the thing is a joke, all it does is count upward as a clock, no stopwatch function, no reset of counters, even though they give you this huge remote with a reset stopwatch button, but does not work on this model. What a joke.
Wow... I was looking for a large atomic clock to put in my game room. Thanks for the heads up.
The holes are reinforced. Designed for bench dogs. The edge holes fit std 20mm european bench dogs. The top holes - dunno - it's a bit random the reinforced section is wider than the chamfered top of the hole. So tightening down a dog is a faff.
good info
Hey Jeff u dont know me but im a huge fan!! I watch all your videos and unfortunately its almost useless for me cause i cant afford many of the product’s displayed in your videos. I am not gonna give a whole life story in a public comment forum like this but i assure you if you heard my story you’d sympathize. While watching today i was literally so jealous of your miter saw despite its age, then when i realized it was so old you dont use it any more and u upgraded it had me thinking...... Jeff i know your a nice guy and i know your a generous guy! Ive tried all your giveaways and all the giveaways online, ive never had a real miter saw, i pay my neighbor $20 a day when i need to borrow one from his conpany. As a result i find I hesitate before taking on a project or charity because of the expense. If you would be interested in giving charity and doing a great act of kindness i would be thrilled to have a Dewalt miter saw!!! I dont care if i have to do ten handyman jobs to pay off the shipping costs on that dream saw! I am only 18 years old and if i dont start taking action i will always be in this terrible struggling place!! I hope you take this message into serious consideration and dont think im just some kid trying to give you a run for your money. Im totally serious and i hope you are to. Plz contact me regardless of your decision on the old tools i will always be a huge fan and support you however i can! Plz reach out my email is brachifeder@gmail.com. And if anyone else reads this comment and wants to help out contact me via email. No act if kindness goes unnoticed ill never forget you and maybe one day ill be able to give back but it all starts here!
flip clamp around and you dont have to reach underneath
Bench dogs for the holes?
Yes they can be used for dogs or more clamps
How flat is the surface of the table?
It is pretty flat
@@jeffostroff Thanks for the info. I plan on getting one soon, but I just wanted to be sure that I would be able to get a reliable angle every time when I make cuts and measurements. That is something that not many people mention in there reviews. I appreciate you making pretty good reviews though. You tend to be one of the people I pay attention to when deciding what to buy.
Sold
Love this bench!
good...
Thank you! Cheers!
Okay, so sick of reviewers saying the holes all over the table are for sticking your tools in !
Seriously! The holes are for bench dog clamps. Or bar clamps that you can take the end of and reattach.
It's not just the X slots for clamping.
what was the name of that song at 3:15?
That is called Arp Ascent from RUclips's audio library of royalty free songs
The table doesn't come with a set of bench dogs???
no bench dogs, no clamps, just the sexy folding table
Bench dog holes 19 mil or 3/4'' great bench .
yes indeed!
Just looked one of these up on eBay in uk 2022 now £360 GBP. 😂😂 no thanks! Got the macallister at £54 just as good if not better even got 2 clamps with it.
Mine tipped over and now it won’t open as easily as before. Bummer
Mine was dropped from 9 feet up and still works [perfectly. I refuse t believe that just tipping over caused it to stop working smoothly.
@@jeffostroff when i press the button and pull up, the thing won’t open. I have to push the legs out and pull for it to open
@@jsuntlbc I have found you have to be pretty level for the mechanism to work. It works easier on a brick patio than a lumpy grass yard
Just saying from a production point of view do we need to see a preview of you dropping the tool then you dropping the tool then talking about dropping the tool? It leaves very little of your video to be new information. I understand giving a teaser but that was more of almost the whole shot at the beginning from my point of view. But I appreciate the drop tests and all the information.
Well I did not show the drop test all the way down to the ground, so yes it is a good teaser.
Dewalt clamps disassemble like you tak I. The video
Actually that is what the holes were designed for. Good Eye.
And now (January 26 2023) it’s $119.00 regular price
Yes, on sale Black Friday it was $89, sky high!
How much weight can this caryy?
I think 1000 pounds on the center
looks wobbly and rickety as all get out
It's on a wobbly ground
Sure feels like this video is deliberately slow, aiming for a time target rather than information density.
Sure feels like you are deliberately whining for no reason. Our videos are always detailed, including drop testing that other channels don't show so they take longer. Beside there is no "target" time like you think, RUclips puts in video ads on any video longer than 8 minutes. I think that's what you're insinuating. If you want a 7 minute video I'm sure you might find one, but not with the amount of details on our videos. Did you forget how to use the jump ahead slider? You can watch any video in a few minutes.
i cant pull mine
They can be a chore to do it.
I worked for Home Depot for 7 years: pricing scams are their standard modus operandi
That's why I always wait on a tool to see if the price drops, or they add batteries to the deal.
Don't tell me when to buy something
But it now! LOL! Actually, they are back up to $99 now, DON'T buy it now.
🗣🗣🗣🗣🗣🗣🗣🗣Great Video 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼✌🏼✌🏼✌🏼✌🏼✌🏼✌🏼✌🏼✊✊✊✊✊✊💪💪💪💪 bro
You know it!
HERE IN MIAMI COST 119$
Yes the price really went up on this but there's a newer model now and maybe you were looking at that newer model?
That new table has a crack and hole in it
It had some use already
Pinch O Matic. lol
'Sup Howie!
This piece of plastic should cost no more than $50 regular price
If it was I would have bought 2 of them.
jeffostroff me toooo!
You didn't review dogs ...did it come with dogs
No, the Worx Pegasus I think comes with dogs I reviewed what came in the box, the clamps
7/2022 it’s now $115
I know Inflation sucks!
👌👌👌
Thanks Gustavo!
If you need a flat work bench don't buy this one!!
It seems flat to me
@@jeffostroff I'm a dewalt guy but this table is garbage!!
You are absolutely right, about a year old now, it has a half inch dip in the center. I intended to use it for joinery, useless now.
Not entirely honest there, are you?
What's with this hole that you made in this table, why didn't you tell about it?
Also, this clamping ain't as good as you are saying, the bottom side of that table is full of holes, so you can't just clamp wherever you want, and you can't clamp too much or it will bend the structural support of the table top.
What hole are you talking about? Also, we often use wood blocks on the bottom of tables to provide a more flat area for clamping. If you're smart, even without the blocks, you put the clamp head so that it coincides with an intersection of 2 lines on the bottom, so it has something to clamp against.
The hole is clearly visible at 10:12 just after your test with sitting on the table.
What's the story behind this hole?
Well, you didn't say about wooden blocks during the video. Anyway, I have a similar table, it's not bad, but let's not pretend that it can replace a proper woodworking table.
One needs to be very delicate with those tables.
@@SylwesterKogowski OK THAT hole, was caused by me when I was furious that things kept not working right with the camera, with the background noise, the geese flying overhead, the planes overhead, noisy motorcycles driving by, UPS drivers back and forth, garbage trucks, could not progress in in production, then it started to rain, and I took my hammer and slammed it down on the top of the table, LOL. That caused the hole, had nothing to do with our testing of the table. Probably should have mentioned it.
@@SylwesterKogowski There are so many little things we would like to say in show and R videos but often times before you know it you start trying to add every little detail in the videos become 45 minutes and people complain about the length
What a waste of time by majoring on the minors
This is what a thorough tool review does. IF not you would complain we left out this, this, this
It was like watching water boil over 6 minutes on pricing and opening this 1 button system. For the love of God STOP making videos.
People like to see all of these details for the love of God stop complaining on peoples videos just learn how to use the Fast forward button on RUclips you probably wasted 6 minutes typing in your complaint