How to Build a Smart Plug using ESP8266 to Control Your Home Appliances from Smartphone
HTML-код
- Опубликовано: 23 июл 2024
- In this project I will show you how you can build your very own Smart plug using ESP8266 Wi-Fi module. The device that we built can easily be plugged into any exiting AC socket and then on the other end you can connect the actual load simply by plugging it into this socket on our device. After that just keep the main switch of your socket always on, and you can control your Load directly from your Smartphone.
Check out the full DIY tutorial here with necessary circuit diagrams and codes: circuitdigest.com/microcontro... Наука
The metal music was a nice touch, I'm subscribing for that
Hi, I love the fact that this is made complete from the ground up.
However, good practice says you should have
a diode across the relay to limit inductive spikes from the relay coil when the transistor turns off.
Great project!
Funny part is. If your smart plug is connected to your router and if your network goes down..then you cant control your router power via smart plug. If you say you will use local network...then sorry it's not smart its just wifi technology...
Apart for the application which u said in the beginning. Everything is just perfect. Kudos!!
Lol🤣🤣🤣🤣it was jus a reason
He connects directly to the device through the device's wifi, not the local network. Similar to a bluetooth connection.
What a super guy you are~! You have may skills of circuit, programming, 3D engineering~! Respect~!
Thank you very much!
Its an excellent example.can you please make a video of how to connect the nodemcu from internet rather than local area network?
We should add shunt diode to protect reverse current, which can be lethal to the dc circuit
if we wanted to add an INA219 sensor, where would it go on the board?
Very good 👍
could this project work with a Relay Module for Arduino? Just for small appliances and lights
Excellent video sir... 🙏🙏🙏
Can we use a low power bluetooth module instead of wifi??
super project how can makes wifi relay on off page
Can we control multiple smartplug from cloud?
Kindly share a link to purchase this components.
No diode in the relay coil load for the transistor.
Can you make a pcb for it
can u use an arduino uno instead of that shield?
Can a 0.8 tonne Air conditioner be also turned off or on using this plug?
good
why the box so big.. you managed to create a very small circuit; however, I find the box could've been smaller
Yep, would definitely use a smaller box myself
nice video. would u teach about IR 3D scanner using raspberry pi ?
Yes, soon
@@Circuitdigest 😍
Which platform is used here
Can we flash it with esphome firmware
Can i add my own website domain, if yes what else changes to be done in code part given... Plz sir reply. waiting for you
Sir how to do smart plug without wifi shield using bread board
can we know how much the total material costs?
Plz meke same as Wipro smart plug
Great explanation:))) kudos for that:) What is total cost of it? And is there any way to directly connect it to router so that we do not have to switch network!!
Yeah you can connect it to your existing switch and then connect smart plug to it.
after connecting to the wifi i'm not being redirected to the html page??
How much it costs for 3D box print??
the details of the components are important.
detials**
sir please send me the programming sheet of ESP8266
Sir you are perfect emmbed engineeri good project plz makr this project node mcu 8266with 4 relay or 8 relay plz plz
Bro plz reply my comments
After turning off the modem how can you connect to the ESP8266 module without wifi signal?
We are not using the modem's Wi-Fi signal here. The ESP8266 itself acts as a webserver
Sir, will you be able to make the one for me? How much would it cost?
you can build one on your own by following the link in description
can i use 5v relay??
please reply
Yes, you can. Check out link in the description for more details
Sir, i am getting errors in adding header files. Can u please help me
Make sure all the file provided are in the same folder as the sketch file.
Please make iot based power consumption monitoring system project or you can add this feature in your smart plug please add technical knowledge from scratch to advance as I am poor in electronics please do add this project into your list
can I use 5v everything?
please reply
ESP8266 needs 3.3V to operate. If you have 5V then you can use a 3.3V regulator like AMS1117-3.3V to get 3.3V
I m not getting 3.3v relay
how much total cost of it
can i use esp8288 -12 instead of -01
Yes you can.
@@Circuitdigest in that case which pin of esp8266_12 equivalent to CH_PD of -01
How is this secure? I mean couldn't this be hacked?
The sound seems broken.
how to connect outside from my home sir.
Look into port forwarding.
@@NaserAlOqab plz elaborate it sir
Buying a wipro wifi plug from amazon will be much cheaper than buying the components for this project.
good